null

Kimo price list

Code Supplier Description List price EUR
46102 Kimo CAL 3 PT PRESS VACU (M) - 3-point absolute pressure calibration of any type of vacuum meter. Possible measuring range from 5 to 25000 microns. Calibration points defined at : 200, 300, 400 microns. Supplied with calibration certificate and conformity verification. (Metrology) 95
46101 Kimo CHK VACC PUMP (M) - Checking of any type of vacuum pump. Supplied with a checking report. (Metrology). 45
46100 Kimo CHK PRESS MANIF (M) - Checking of any type of manifold or fluid recovery station. Supplied with a checking report. (Metrology). 47
46099 Kimo CHK PH-METER (M) - PH-metry checking of any type of pH-meter. Supplied with a checking report. (Metrology). 75
46098 Kimo CHK SOLA RADIO (M) - Radiometric checking of any type of solarimeter. Supplied with a checking report. (Metrology). 52
46097 Kimo CHK LUX PHOTO (M) - Photometric checking of any type of light meter. Supplied with a checking report. (Metrology). 95
46096 Kimo CHK TACHY (M) - Tachometry checking of any type of tachometer. Supplied with a checking report. (Metrology). 70
46095 Kimo CHK AIR QUALITY (M) - CO or CO2 checking of any type of air quality instrument. Supplied with a checking report. (Metrology). 55
46094 Kimo CAL 3PT TEMP PORT (M) - 3-point temperature calibration by comparison of a complete measurement chain for a portable device or a transmitter. Possible measuring range from -20 to +80 °C. Calibration points defined at : 10 / 25 / 50 °C. Supplied with calibration certificate and conformity verification (Metrology) 80
46092 Kimo CHK SUBCONT COFRAC CAL - Checking report following a COFRAC calibration performed by a subcontractor. This report allows to verify the conformity of an instrument according to the accuracies defined in agreement with the customer by taking into account the uncertainties of calibration. Supplied with the COFRAC checking report of the subcontractor accompanying the COFRAC calibration certificate. (Metrology) 68
46091 Kimo CAL SUB COFRAC 5PT VELOC - COFRAC calibration in air velocity performed by subcontractor including 5 points between 0.15 m/s and 40 m/s. The points are defined in agreement with the customer or, if not, on the measurement range of the device.  Supplied with the COFRAC calibration certificate of the subcontractor. (Metrology) 425
46090 Kimo CAL SUB COFRAC 11PT PRES - COFRAC pressure calibration (relative or absolute) performed by subcontractor, including 1 cycle of 11 points and 3 points of repeatability (11 points up, 10 points down and 3 points of repeatability) between 0 and 700 bar. The points are defined in agreement with the customer or, if not, on the measurement range of the device.  Supplied with the COFRAC calibration certificate of the subcontractor. (Metrology) 475
46089 Kimo CAL SUB COFRAC 6PT PRESS - COFRAC pressure calibration (relative or absolute) performed by subcontractor, including 1 cycle of 6 points and 1 point of repeatability (i.e. 6 points up, 5 points down and 1 point of repeatability) between 0 and 700 bar. The points are defined in agreement with the customer or, if not, on the measurement range of the device.  Supplied with the COFRAC calibration certificate of the subcontractor (Metrology) 320
46088 Kimo CAL SUB COFRAC 5PT AFLOW - COFRAC air flow calibration performed by subcontractor, including 5 calibration points between 5 and 4250 m3/h. The points are defined in one direction only (supply or exhaust) in agreement with the customer or, if not, on the measurement range of the device.  Supplied with the COFRAC calibration certificate of the subcontractor. (Metrology) 1030
46087 Kimo CHK COFRAC HYGRO - Checking report following a COFRAC SAUERMANN calibration in hygrometry. This report allows to verify the conformity of an instrument according to the accuracies defined in agreement with the customer by taking into account the uncertainties of calibration. Supplied with a COFRAC checking report accompanying the COFRAC calibration certificate. Accreditation n° 2-6861. The scope of accreditation is available on the website www.cofrac.fr. The work performed under this quotation is treated as absolutely confidential. (Metrology) 25
46086 Kimo CAL 1PT ADDI COFRAC HYGR - Additional COFRAC SAUERMANN calibration point in humidity between 10 %RH and 95 %RH (at room temperature by default or between 10 °C and 50 °C on request). The point is defined in agreement with the customer.  Accreditation n° 2-6861. The scope of accreditation is available on the website www.cofrac.fr. The work performed under this quotation is treated as absolutely confidential. (Metrology) 40
46085 Kimo CAL 3PT COFRAC HYGRO STD - SAUERMANN COFRAC calibration in relative humidity by comparison, including 3 calibration points between 10 %RH and 95 %RH (at room temperature by default or between 10 °C and 50 °C on request). The points are defined in agreement with the customer. Supplied with a COFRAC calibration certificate. Accreditation n° 2-6861. The scope of accreditation is available on the website www.cofrac.fr. The work performed under this quotation is treated as absolutely confidential. (Metrology) 370
46084 Kimo CAL 3PT COFRAC HYGRO BEF - COFRAC SAUERMANN calibration in relative humidity by comparison before adjustment, including 3 calibration points between 10 %RH and 95 %RH (at room temperature by default or between 10 °C and 50°C on request). The points are defined in agreement with the customer. Supplied with a COFRAC calibration certificate. This service includes an adjustment after the calibration and must necessarily be associated with a COFRAC calibration afterwards. Accreditation n° 2-6861. The scope of accreditation is available on the website www.cofrac.fr. The work performed under this quotation is treated as absolutely confidential. (Metrology) 425
46083 Kimo CHK COFRAC TEMP - Checking report following a COFRAC SAUERMANN temperature calibration. This report allows to verify the conformity of an instrument according to the accuracies defined in agreement with the customer by taking into account the uncertainties of calibration. Supplied with a COFRAC checking report accompanying the COFRAC calibration certificate. Accreditation no. 2-6860. The scope of accreditation is available on the website www.cofrac.fr. The work performed under this quotation is treated as absolutely confidential. (Metrology) 25
46082 Kimo CAL 1PT ADDI COFRAC TEMP - Additional COFRAC SAUERMANN calibration point in temperature between -70 °C and +200 °C. The point is defined in agreement with the customer.  Accreditation no. 2-6860. The scope of accreditation is available on the website www.cofrac.fr. The work performed under this quotation is treated as absolutely confidential. (Metrology) 35
46081 Kimo CAL 5 PT COFRAC TEMP STD - COFRAC SAUERMANN temperature calibration by comparison, including 5 calibration points between -70 °C and +200 °C. The points are defined in agreement with the customer (point at 0 °C necessary for a calibration of probe in thermostatic bath). Supplied with a COFRAC calibration certificate. Accreditation n°2-6860. The scope of accreditation is available on the website www.cofrac.fr. The work performed under this quotation is treated as absolutely confidential. (Metrology) 295
46080 Kimo CAL 3 PT COFRAC TEMP STD - COFRAC SAUERMANN temperature calibration by comparison, including 3 calibration points between -70 °C and +200 °C. The points are defined in agreement with the customer (point at 0 °C necessary for a calibration of probe in thermostatic bath). Supplied with a COFRAC calibration certificate. Accreditation n°2-6860. The scope of accreditation is available on the website www.cofrac.fr. The work performed under this quotation is treated as absolutely confidential. (Metrology) 250
46079 Kimo CAL 5 PT COFRAC TEMP BEF - COFRAC SAUERMANN temperature calibration by comparison before adjustment, including 5 calibration points between -70 °C and +200 °C. The points are defined in agreement with the customer (point at 0 °C necessary for a calibration of probe in thermostatic bath). Supplied with a COFRAC calibration certificate. This service includes an adjustment after the calibration and must necessarily be associated with a COFRAC calibration afterwards. Accreditation n°2-6860. The scope of accreditation is available on the website www.cofrac.fr. The work performed under this quotation is treated as absolutely confidential. (Metrology) 325
46078 Kimo CAL 3 PT COFRAC TEMP BEF - COFRAC SAUERMANN temperature calibration by comparison before adjustment, including 3 calibration points between -70 °C and +200 °C. The points are defined in agreement with the customer (point at 0 °C necessary for a calibration of probe in thermostatic bath). Supplied with a COFRAC calibration certificate. This service includes an adjustment after the calibration and must necessarily be associated with a COFRAC calibration afterwards. Accreditation n°2-6860. The scope of accreditation is available on the website www.cofrac.fr. The work performed under this quotation is treated as absolutely confidential. (Metrology) 280
46077 Kimo CHK WEIGHT (M) - Checking of all type of refrigerant scale. Supplied with a checking report. (Metrology). 42
46076 Kimo CHK VAT ELECT (M) - Checking of any type of VAT (Voltage Absence Verifier). Supplied with a checking report. (Metrology). 36
46075 Kimo CHK ELEC METER (M) - Checking of any type of multimeter, current clamp, megohmeter. Supplied with a checking report. (Metrology). 48
46074 Kimo CHK ADDI GAS SENSOR (M) - Checking an additional gas sensor of a combustion analyzer among the following gases: NO / NO2 / SO2 / CH4 / H2S / NH3 / CO2. Supplied with a checking report. (Metrology). 25
46073 Kimo CHK COMBU ANALYZ (M) - Checking of all types of combustion analyzers 2 gas sensors: O2 & CO. Checking gas, draught pressure and smoke temperature by simulation. Supplied with a checking report. (Metrology). 112
46072 Kimo CHK PPE 4 GAS (M) - Checking of a 4 gases PPE (Personnal Protective Equipment) among the following gases: O2 / CO / NO / NO2 / SO2/ H2S / NH3 / CH4. Supplied with a checking report. (Metrology). 92
46071 Kimo CHK PPE 1 GAS (M) - Checking of a single gas PPE (Personnal Protective Equipment) among the following gases: O2 / CO / NO / NO2 / SO2/ H2S / NH3 / CH4. Supplied with a checking report. (Metrology). 48
46070 Kimo CHK CH4 LEAK DETECT(M) - Checking of  a CH4 leak detector. Supplied with a checking report. (Metrology) 55
46069 Kimo CHK REF LEAK DETECT (M) - Checking of a refrigerant gas leak detector at the sensitivity threshold of 5 g / year. Supplied with a checking report. (Metrology). 68
46068 Kimo CHK HYGRO (M) - Hygrometry checking of any type of hygrometer or transmitter. Supplied with a checking report. (Metrology). 94
46067 Kimo CHK TEMP SIMU (M) - Temperature checking by simulation of any type of thermometer. Supplied with a checking report. (Metrology). 42
46066 Kimo CHK TEMP CHAIN (M) - Temperature checking by comparison of a complete measurement chain of any type of thermometer or transmitter. Supplied with a checking report. (Metrology). 52
46065 Kimo CHK VELOCITY (M) - Air velocity checking of any type of anemometer, thermo-anemometer or transmitter. Supplied with a checking report. (Metrology). 91
46064 Kimo CHK PRESSURE (M) - Pressure checking of any type of manometer, micromanometer, vacuum meter or transmitter. Supplied with a checking report. (Metrology). 88
46063 Kimo CAL MULTI 5 PARA (M-AS) - Calibration of 5 parameters of a multifunction device to be chosen among: velocity, pressure, hygrometry, CO or CO2 (possibility to choose several times the same parameter). 5 calibration points in pressure (relative or differiential), defined at : 10, 25, 50, 70, 90 % of the full scale of the instrument. 5 calibration points in air velocity with a temperature control at room temperature, points defined at : 1st point defined according to the type of probe */ 5 / 10 / 15 / 25 m/s. (* hotwire: 0.5 m/s; 70 mm diam. vane: 0.6 m/s; 100 mm diam. vane: 0.5 m/s; 14 mm diam. vane: 1.1 m/s). 3 calibration points in hygrometry at room temperature with a temperature control, defined at : 11 / 44 / 85 %RH. 3 calibration points in CO2 with temperature control, defined at : 50 / 1700 / 4500 ppm.  3 calibration points in CO with temperature control, defined at : 10 / 50 / 100 ppm. Supplied with calibration certificate and conformity verification. (Metrology) 510
46062 Kimo CAL MULTI 4 PARA (M-AS) - Calibration of 4 parameters of a multifunction device to be chosen among: velocity, pressure, hygrometry, CO or CO2 (possibility to choose several times the same parameter). 5 calibration points in pressure (relative or differiential), defined at : 10, 25, 50, 70, 90 % of the full scale of the instrument. 5 calibration points in air velocity with a temperature control at room temperature, points defined at : 1st point defined according to the type of probe */ 5 / 10 / 15 / 25 m/s. (* hotwire: 0.5 m/s; 70 mm diam. vane: 0.6 m/s; 100 mm diam. vane: 0.5 m/s; 14 mm diam. vane: 1.1 m/s). 3 calibration points in hygrometry at room temperature with a temperature control, defined at : 11 / 44 / 85 %RH. 3 calibration points in CO2 with temperature control, defined at : 50 / 1700 / 4500 ppm.  3 calibration points in CO with temperature control, defined at : 10 / 50 / 100 ppm. Supplied with calibration certificate and conformity verification. (Metrology) 425
46061 Kimo CAL MULTI 3 PARA (M-AS) - Calibration of 3 parameters of a multifunction device to be chosen among: velocity, pressure, hygrometry, CO or CO2 (possibility to choose several times the same parameter). 5 calibration points in pressure (relative or differiential), defined at : 10, 25, 50, 70, 90 % of the full scale of the instrument. 5 calibration points in air velocity with a temperature control at room temperature, points defined at : 1st point defined according to the type of probe */ 5 / 10 / 15 / 25 m/s. (* hotwire: 0.5 m/s; 70 mm diam. vane: 0.6 m/s; 100 mm diam. vane: 0.5 m/s; 14 mm diam. vane: 1.1 m/s). 3 calibration points in hygrometry at room temperature with a temperature control, defined at : 11 / 44 / 85 %RH. 3 calibration points in CO2 with temperature control, defined at : 50 / 1700 / 4500 ppm.  3 calibration points in CO with temperature control, defined at : 10 / 50 / 100 ppm. Supplied with calibration certificate and conformity verification. (Metrology) 335
46060 Kimo CAL MULTI 2 PARA (M-AS) - Calibration of 2 parameters of a multifunction device to be chosen among: velocity, pressure, hygrometry, CO or CO2 (possibility to choose several times the same parameter). 5 calibration points in pressure (relative or differiential), defined at : 10, 25, 50, 70, 90 % of the full scale of the instrument. 5 calibration points in air velocity with a temperature control at room temperature, points defined at : 1st point defined according to the type of probe */ 5 / 10 / 15 / 25 m/s. (* hotwire: 0.5 m/s; 70 mm diam. vane: 0.6 m/s; 100 mm diam. vane: 0.5 m/s; 14 mm diam. vane: 1.1 m/s). 3 calibration points in hygrometry at room temperature with a temperature control, defined at : 11 / 44 / 85 %RH. 3 calibration points in CO2 with temperature control, defined at : 50 / 1700 / 4500 ppm.  3 calibration points in CO with temperature control, defined at : 10 / 50 / 100 ppm. Supplied with calibration certificate and conformity verification. (Metrology) 235
46058 Kimo CAL 1 PT ADDI WEIGHI (M) - Weighing calibration of an additional point to be defined by the customer on the concerned measuring range. (Metrology) 15
46057 Kimo CAL 5 PT WEIGHI STD (M) - 5-point weighing calibration for all type of refrigerant scale. Possible measuring range from 1 to 140 kg. Calibration points defined at : 20, 40, 60, 80, 100% of the full scale of the instrument. Supplied with calibration certificate and conformity verification. (Metrology) 59
46056 Kimo CAL 3 PT PH-METER (M) - 3-point pH-metry calibration of any type of pH-meter. Fixed calibration points defined at : 4 / 7 / 10. Supplied with calibration certificate and conformity verification. (Metrology) 95
46055 Kimo CAL 1 PT RADIO STD (M) - 1-point radiometry calibration of any type of solarimeter. Single calibration point defined at: 1000 W/m². Supplied with calibration certificate and conformity verification. (Metrology) 75
46054 Kimo CAL 1 PT ADDI PHOTO (M) - Photometry calibration of an additional point to be defined by the customer on the measuring range concerned. (Metrology) 21
46053 Kimo CAL 3 PT PHOTO STD (M) - 3-point photometry calibration of any type of light meter. Possible measuring range from 10 to 9500 Lux. Calibration points defined at : 50 / 1000 / 9000 Lux. Supplied with calibration certificate and conformity verification. (Metrology) 165
46052 Kimo CAL 1PT ADDI TACHY (M) - Tachometry calibration of an additional point to be defined by the customer on the measuring range concerned. (Metrology) 15
46051 Kimo CAL 5PT TACHY CONT (M) - 5-point contact tachometry calibration of any type of tachometer. Possible measuring range from 30 to 3000 rpm. Calibration points defined at: 500 / 1000 / 1500 / 2000 / 2500 rpm. Supplied with calibration certificate and conformity verification. (Metrology) 105
46050 Kimo CAL 5PT TACHY OPTI (M) - 5-point optical tachometry calibration of all types of tachometers. Possible measuring range from 30 to 60000 rpm. Calibration points defined at: 500 / 2500 / 5000 / 10000 / 20000 rpm. Supplied with calibration certificate and conformity verification. (Metrology) 105
46049 Kimo CAL 1 PT ELEC MEGO (M) - Calibration of a megohmmeter in insulation, voltage injection and continuity. Calibration points defined in insulation at 1 / 10 / 100 MOhm on all calibers, voltage injection at 500 V (and 1000V if existing caliber on the device) and continuity at +/- 20 Ohm. Supplied with calibration certificate and conformity verification. (Metrology) 70
46048 Kimo CAL 1 PT ADDI ELEC (M) - Calibration of an additional point of a multimeter or a clamp ammeter in voltage, current and resistance. Possible measuring range according to the range of the multimeter / current clamp on the most suitable caliber. Supplied with calibration certificate and conformity verification. (Metrology) 15
46047 Kimo CAL 1 PT ELEC STD (M) - Calibration in 1 point by caliber of a multimeter or a clamp ammeter in voltage, current and resistance. Calibration point defined at 90% of the full scale of the caliber. Supplied with calibration certificate and conformity verification. (Metrology) 62
46046 Kimo CAL 1 PT ADDI ACOUS (M) - Acoustic calibration of an additional point to be defined by the customer on the measuring scale concerned. (Metrology) 40
46045 Kimo CAL 1 PT ACOUS CALIB (M) - 1-point calibration in acoustics of any type of calibrator. Possible fixed measuring points: 94 and 114 dB at 1000 Hz. Calibration points defined at: 94 dB at 1000 Hz as standard. Supplied with calibration certificate and conformity verification. (Metrology) 110
46044 Kimo CAL 2 PT ACOUS LEV5 (M) - 2-point acoustic calibration of any type of sound level meter / exposure meter with microphone tracing in open field at 84 dB for frequencies between 80 and 16000 Hz, with electrical simulation calibration for sound level meters / exposure meters with removable microphone and electrical calibration of 1/3 octave filter according to IEC 61260. Calibration points defined at: 94 dB and 114 dB at 1000 Hz. Other possible measuring points: 25 / 30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 / 110 dB at 1000 Hz. Supplied with calibration certificate and conformity verification. (Metrology) 580
46043 Kimo CAL 2 PT ACOUS LEV4 (M) - 2-point acoustic calibration of any type of sound level meter / exposure meter with microphone tracing in open field at 84 dB for frequencies between 80 and 16000 Hz, with electrical simulation calibration for sound level meters / exposure meters with detachable microphone and electrical calibration of 1/1 octave filter according to IEC 61260. Calibration points defined at: 94 dB and 114 dB at 1000 Hz. Other possible measuring points: 25 / 30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 / 110 dB at 1000 Hz. Supplied with calibration certificate and conformity verification. (Metrology) 490
46042 Kimo CAL 2 PT ACOUS LEV3 (M) - 2-point acoustic calibration of any type of sound level meter / exposure meter with microphone tracing in open field at 84 dB for frequencies between 80 and 16000 Hz, with electrical simulation calibration for sound level meters / exposure meters with removable microphone. Calibration points defined at: 94 dB and 114 dB at 1000 Hz. Other possible measuring points: 25 / 30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 / 110 dB at 1000 Hz. Supplied with calibration certificate and conformity verification. (Metrology) 380
46041 Kimo CAL 2 PT ACOUS LEV2 (M) - 2-point acoustic calibration of any type of sound level meter / exposure meter with open field microphonic tracing at 84 dB for frequencies between 80 and 16000 Hz. Calibration points defined at: 94 dB and 114 dB at 1000 Hz. Other possible measuring points: 25 / 30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 / 110 dB at 1000 Hz. Supplied with calibration certificate and conformity verification. (Metrology) 185
46040 Kimo CAL 2 PT ACOUS LEV1 (M) - 2-point acoustic calibration of any type of sound level meter / exposure meter (without microphone tracing).  Calibration points defined at: 94 dB and 114 dB at 1000 Hz. Other possible measuring points: 25 / 30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 / 110 dB at 1000 Hz. Supplied with calibration certificate and conformity verification. (Metrology) 125
46039 Kimo CAL 1PT ADDI GAS (M) - Gas calibration (CO2-CO-CH4) of an additional point to be defined by the customer on the measuring range Concerned.(Metrology) 25
46038 Kimo CAL 1 PT GAS CH4 (M) - 1-point calibration in CH4 of any type of instrument. Calibration point defined at : 5000 ppm. Other possible measuring points : 2500 ppm / 7500 ppm / 3%. Supplied with calibration certificate and conformity verification. (Metrology) 75
46037 Kimo CAL 3 PT GAS CO (M) - 3-point calibration in CO with temperature control of any type of instrument for air quality measurement. Possible measuring range from 0 to 3500 ppm. Calibration points defined at : 10 / 50 / 100 ppm.  Supplied with calibration certificate and conformity verification. (Metrology) 135
46036 Kimo CAL 3 PT GAS CO2 (M) - 3-point calibration in CO2 with temperature control of any type of instrument for air quality measurement. Possible measuring range from 0 to 20000 ppm. Calibration points defined at : 350 / 1700 / 4500 ppm. Supplied with calibration certificate and conformity verification. (Metrology) 135
46035 Kimo CAL 1PT ADDI FLOW (M) - Airflow calibration of an additional point to be defined by the customer on the measuring range concerned. 19
46034 Kimo CAL 5 PT FLOW CONE (M) - 5-point flow calibration (in exhaust) of any type of anemometer associated with a measuring cone.  Possible measuring range from 50 to 1200 m3/h. Calibration points defined at : 50 / 100 / 150 / 200 / 250 m3/h . Supplied with calibration certificate and conformity verification. (Metrology) 150
46033 Kimo CAL DBM620 CPLT (M-AS) - Calibration of 3 parameters of a DBM620 in airflow, pressure and hygrometry. 14 flow points (7 in exhaust and 7 in supply). Possible measuring range from 50 to 4000 m3/h. Calibration points defined at: 150 / 500 / 900 / 1500 / 2200 / 3000 / 4000 m3/h. 5 pressure points. Possible measuring range : +/-2500 Pa. Calibration points defined at : 100 / 500 / 1000 / 1500 / 2000 Pa. 3 points in hygrometry. Possible measuring range : 5 to 95 %. Calibration points defined at : 20 / 50 /75 %RH. Supplied with calibration certificate and conformity verification. (Metrology) 480
46032 Kimo CAL 14 PT FLOW STD. (M) - 14-point airflow calibration (7 in exhaust and 7 in supply) of any type of airflow meter. Possible measuring range from 50 to 4000 m3/h. Calibration points defined at : 150 / 500 / 900 / 1500 / 2200 / 3000 / 4000 m3/h or 150 / 500 / 850 / 1200 / 1800 / 2400 / 3000 m3/h depending on the measuring range of the instrument. Supplied with calibration certificate and conformity verification. (Metrology) 350
46031 Kimo CAL 1 PT COMBU SENS 2(M) - 1-point calibration of an additional gas sensor of any type of combustion gas analyzer. Defined calibration point, H2S: 10 ppm and NH3: 50 ppm. Supplied with calibration certificate and conformity verification. (Metrology) 25
46030 Kimo CAL 3 PT COMBU SENS 1(M) - 3-point calibration of an additional or a sole gas sensor of any type of combustion gas analyzer. Calibration points defined, NO / NO2 / SO2: 0 / 150 / 450 ppm and NOLow / NO2Low / SO2Low: 0 / 15 / 90 ppm, CH4: 2500 / 5000 / 7500 ppm, CO IR 3 / 6 / 8,5 %, CO2 IR 5 / 10 / 15 %, CH4 IR 5000 / 15000 / 25000 ppm. Supplied with calibration certificate and conformity verification. (Metrology) 45
46029 Kimo CAL COMBU COMPLT (M-AS) - Calibration of 3 parameters of any type of 2 gas sensor combustion analyzer: O2 & CO, in gas O2 & CO, in draft pressure and in flue gas temperature channel by simulation. Calibration with defined points in gas, O2: 0.5 / 5 / 10 % and CO: 50 / 500 / 1000 ppm, in draft pressure for a Si-CA030/130/230: -10 / 100 / 450 Pa and for any other analyzer: 30 / 65 / 990 Pa (possible measuring range +/- 20 000 Pa.) and in flue gas temperature by simulation in TcK 25 / 100 / 300 °C (possible measuring range TcK from -200 to +1400 °C). Supplied with calibration certificate and conformity verification. (Metrology) 155
46028 Kimo CAL 3 PT COMBU STD (M) - 3-point calibration of any type of combustion gas analyzer 2 cells: O2 & CO. Defined calibration points, O2 : 0.5 / 5 / 10 % and CO : 50 / 500 / 1000 ppm. Supplied with calibration certificate and conformity verification. (Metrology) 115
46027 Kimo CAL 2PT RH% MOISTURE (M) - 2-point calibration of a moisture meter (Sauermann / Kimo). Possible measuring range from 9 to 90 % for a type 2 wood. Calibration points defined at : 14.1 and 27 %. Supplied with calibration certificate and conformity verification. (Metrology) 90
46026 Kimo CAL 1PT ADDI RH% (M) - Calibration in hygrometry of an additional point to be defined by the customer on the measuring range concerned. 22
46025 Kimo CAL 3 PT RH% DEW TEMP(M) - 3-point calibration of dew point temperature at room temperature of any type of hygrometer. Possible measuring range from -20 to +20 °C Td. Calibration points defined at : -10 / 8 / 18 °C Td. Supplied with calibration certificate and conformity verification. (Metrology) 185
46024 Kimo CAL 1 PT RH% AMBIENT (M) - 1 point calibration in ambient hygrometry with a temperature control of any type of hygrometer. Single calibration point defined at 50 %RH +/- 10 %RH (according to the ambient hygrometry of our laboratories). Supplied with calibration certificate and conformity verification. (Metrology) 75
46023 Kimo CAL 3 PT RH% CLIM CHB(M) - 3-point calibration in hygrometry at a temperature defined by the customer between 0 and 60 °C with a temperature control of any type of hygrometer. Possible measuring range from 5 to 98 %RH and at a temperature between 0 and 60 °C. Calibration points defined at : 11 / 44 / 85 %RH. Supplied with calibration certificate and conformity verification. (Metrology) 185
46022 Kimo CAL 3 PT RH% STD (M) - 3-point calibration in hygrometry at room temperature with temperature control of any type of hygrometer. Possible measuring range from 5 to 98 %RH. Calibration points defined at : 11 / 44 / 85 %RH. Delivered with calibration certificate and conformity verification. (Metrology) 145
46021 Kimo CAL 1PT ADDI TEMP (M) - Temperature calibration of an additional point to be defined by the customer on the measuring range concerned. (Metrology) 20
46020 Kimo CAL 3 PT TEMP CONTACT(M) - 3-point contact temperature calibration on a hot plate by comparison of a complete measurement chain. Possible measuring range from 25 to +400 °C. Calibration points defined at : 50 / 100 / 150 °C. Supplied with calibration certificate and conformity verification. (Metrology) 95
46019 Kimo CAL 3 PT TEMP INFRA (M) - 3-point temperature calibration of an infrared thermometer by comparison of a complete measurement chain. Possible measuring range from -30 to +550 °C. Calibration points defined at : 50 / 100 / 150 °C. Supplied with calibration certificate and conformity verification. (Metrology) 110
46018 Kimo CAL 4 PT TEMP INFILT (M) - 4-point temperature calibration by comparison of a complete measurement chain for infiltrometry of any type of thermometer. Possible measuring range from -100 to +1100 °C. Calibration points defined at : -19.9 / 0 / 20 / 39.9 °C. Supplied with calibration certificate and conformity verification according to FD P50-784 & NF EN ISO 9972 (+/- 0.5 °C) (Metrology) 95
46016 Kimo CAL 3 PT TEMP COMBU(M) - 3-point temperature calibration by simulation of a flue gas temperature channel of a combustion gas analyzer probe. Possible measuring range thermocouple (K) from -200 to +1400 °C. TcK calibration points defined at : 25 / 100 / 300 °C. Supplied with calibration certificate and conformity verification. (Metrology) 50
46015 Kimo CAL 5 PT TEMP SIMU (M) - 5-point temperature calibration by simulation for an electronic thermometer alone or a calibrator. Possible measuring ranges Pt100 / Pt1000 from -200 to +600 °C, NTC from -20 to +120 °C, thermocouple (K) from -200 to +1400 °C. Defined calibration points Pt100 / Pt1000: -90 / 0 / 100 / 200 / 390 °C, NTC (Sauermann / Kimo): -20 / 0 / 25 / 50 / 100 °C, TcK: -150 / 0 / 150 / 500 / 1000 °C. Supplied with calibration certificate and conformity verification. (Metrology) 60
46014 Kimo CAL 3PT TEMP AMBIENT (M) - 3-point temperature calibration by comparison of a complete measurement chain for room probe or datalogger with internal channel. Possible measuring range from -70 to +180°C. Calibration points defined at : -20 / 25 / 50 °C. Supplied with calibration certificate and conformity verification. (Metrology) 90
46013 Kimo CAL 3 PT TEMP HOT(M) - 3-point calibration in high temperature by comparison of a complete measurement chain. Possible measuring range from -100 to +1100 °C. Calibration points (hot) defined at : 100 / 300 / 500 °C. Supplied with calibration certificate and conformity verification. (Metrology) 95
46012 Kimo CAL 3 PT TEMP STD (M) - 3-point calibration in standard temperature by comparison of a complete measurement chain. Possible measuring range from -100 to +1100 °C. Calibration points defined at : -20 / 50 / 100 °C. Supplied with calibration certificate and conformity verification. (Metrology) 80
46011 Kimo CAL 3 PT TEMP COLD (M) - 3-point calibration in low temperature by comparison of a complete measurement chain. Possible measuring range from -100 to +1100 °C and fixed point at -196 °C. Calibration points (cold) defined at : -196 / -80 / 0 °C. Supplied with calibration certificate and conformity verification. (Metrology) 105
46010 Kimo CAL 3PT VELOC INFILT (M) - 3-point air velocity calibration for infiltrometry of any type of anemometer. Possible measuring range from 0.15 to 35 m/s. Calibration points defined at : 0.5 / 5 / 10 m/s. Supplied with calibration certificate and conformity verification according to FD P50-784 application guide & NF EN ISO 9972 (Metrology) 120
46009 Kimo CAL 10PT VELOC PITOT(M) - 10-point air velocity calibration of a Pitot tube with determination of the average K coefficient on a manometer, micromanometer or pressure transmitter. Possible measuring range : 5 to 35 m/s. Calibration points defined at :  5 / 7 / 10 / 12 / 15 / 18 / 20 / 22 / 25 / 30 m/s. Supplied with calibration certificate and conformity verification. (Metrology) 225
46008 Kimo CAL 1PT ADDI VELOC (M) - Air velocity calibration of an additional point to be defined by the customer on the measuring range concerned . (Metrology) 19
46007 Kimo CAL 5 PT VELOC LOW (M) - 5-point calibration in low air velocity with an ambient temperature control of any type of hotwire anemometer. Possible measurement range from 0.15 to 5 m/s. Low velocity calibration points defined at : 0.2 / 1 / 2 / 3 / 4.5 m/s. Supplied with calibration certificate and conformity verification. (Metrology) 140
46006 Kimo CAL 5 PT VELOC STD (M) - 5-point calibration in air velocity with an ambient temperature control of any type of anemometer. Possible measuring range from 0.15 to 35 m/s. Calibration points defined at : 1st point defined according to the type of probe * / 5 / 10 / 15 / 25 m/s. (* hotwire: 0.5 m/s; 70 mm diam. vane: 0.6 m/s; 100 mm diam. vane: 0.5 m/s; 14 mm diam. vane: 1.1 m/s). Supplied with calibration certificate and conformity verification. (Metrology) 140
46005 Kimo CAL 3 PT PRESS COMBU (M) - 3-point draft pressure calibration of all types of combustion gas analyzers. Possible measuring range of +/- 20 000 Pa. Calibration points defined for a Si-CA030/130/230 at: -10 / 100 / 450 Pa and for any other analyzer at: 30 / 65 / 990 Pa. Supplied with calibration certificate and conformity verification. (Metrology) 95
46004 Kimo CAL 1PT ADDI PRESS  (M) - Pressure calibration (relative or absolute) of an additional point to be defined by the customer on the measuring range concerned. (Metrology) 17
46003 Kimo CAL 3 PT PRESS ATMO (M) - 3-point absolute pressure calibration of any type of manometer or atmospheric pressure transmitter. Possible measuring range from 800 to 1100 mbar. Calibration points defined at : 980, 1000, 1030 mbar. Supplied with calibration certificate and conformity verification. (Metrology) 115
46002 Kimo CAL 3 PT PRESS MANIF (M) - 2 times 3-point calibration in relative pressure of any type of manifold or fluid recovery station. Possible measuring range from -1 to +40 bar. Calibration points defined for Low Pressure at : -1 / 5 / 10 bar and for High Pressure at : 10 / 20 / 30 bar. Supplied with calibration certificate and conformity verification. (Metrology) 95
46001 Kimo CAL 5 PT PRESS STD (M) - 5-point pressure calibration (relative, differential or absolute) of any type of manometer, micromanometer or transmitter. Possible measuring range from 1 Pa to 2500 mbar and from -1 to +700 bar. Calibration points defined at: 10, 25, 50,70, 90 % of the full scale of the instrument. Supplied with calibration certificate and conformity verification. (Metrology) 135
27936 Kimo 180MM FLEXIBLE PROBE - Flexible flue gas sampling probe, 180mm (7") probe length with 2m (6') dual hose, rated to 800°C (1470°F) max, includes water trap with filter for Si-CA 030/130/230. 310
27926 Kimo SICA 230 KIT3V - Combustion analyzer Si-CA 230 Kit 3NV with touch screen, 3 electrochemical gas sensors (O2, CO, NO) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, vinyl carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 1845
27925 Kimo SICA 230 KIT2V - Combustion analyzer Si-CA 230 Kit 2V with touch screen, 2 electrochemical gas sensors (O2, CO) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, vinyl carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 1592
27920 Kimo RCT-8-12 S+M - RCT-8-12 S+M 29
27917 Kimo CMM-K Alone - CMM-K miniature male thermocouple K connector. Operating temperature : - 50 °C to + 210 °C. To be mounted on already delivered probes (should be ordered alone - without the probe). 23
27916 Kimo CMF-K Alone - CMF-K miniature female thermocouple K connector. Operating temperature : - 50 °C to + 210 °C. To be mounted on already delivered probes (should be ordered alone - without the probe). 14
27915 Kimo CSM-K Alone - CSM-K standard male thermocouple K connector. Operating temperature : - 50 °C to + 210 °C. To be mounted on already delivered probes (should be ordered alone - without the probe). 25
27914 Kimo CSF-K Alone - CSF-K standard female thermocouple K connector. Operating temperature : - 50 °C to + 210 °C. To be mounted on already delivered probes (should be ordered alone - without the probe). 23
27913 Kimo STA-13 Alone - STA-13 Alone 121
27911 Kimo KICA-320 Alone - KICA-320 adapter cable for other PT 100 temperature probes, 3 wires including a terminal block and a male Mini-Din connector, for KISTOCK KT 320 and KT TrackLog. To be mounted  on already delivered probes (must be ordered alone - without probe). 88
27910 Kimo TCP 310 Alone - Adapter for 3-wire PT100 temperature probe, resolution 0.1 °C type TCP-310. Output on Mini-Din connector for portable devices class 210 & 310 of 2014. To be mounted on already delivered probes. (Should be ordered alone - without the probe). 60
27909 Kimo TCP 110 Alone - Adapter for PT100 temperature probe type TCP-110. Output on Mini-Din connector for PT100 thermometers class 60 and class 50 & 110 of 2014. To be mounted on already delivered probes. (should be ordered alone - without the probe). 29
27908 Kimo MVA Alone - MVA Alone 180
27906 Kimo SPI2-ATMO Alone - SPI2-ATMO Alone 164
27905 Kimo SPI2-10000 Alone - SPI2-10000 Alone 181
27904 Kimo SPI2-1000 Alone - SPI2-1000 Alone 181
27903 Kimo SPI2-500 Alone - SPI2-500 Alone 181
27902 Kimo SPI2-100 Alone - SPI2-100 Alone 181
27898 Kimo DEVICE CONFIGURATION - DEVICE CONFIGURATION 11
27897 Kimo BF-8 Alone - Stainless steel mounting flange type BF-8, for straight Pitot tube and probe diameter 8 mm. (Supplied alone - not mounted). 17
27897 Kimo BF-8 Alone - BF-8 Alone 17
27896 Kimo BF-6 Alone - Stainless steel mounting flange type BF-6, for straight Pitot tube and probe diameter 6 mm. (Supplied alone - not mounted). 16
27895 Kimo BF-4 Alone - Stainless steel mounting flange type BF-4, for straight Pitot tube and probe diameter 3 mm. (Supplied alone - not mounted). 13
27883 Kimo BF-28-F Alone - Cast iron mounting flange type BF-28-F, for "S" type Pitot tube. (Supplied alone - not mounted). 77
27882 Kimo BF-12-F Alone - Cast iron mounting flange type BF-12-F, for straight Pitot tube diameter 12 mm. (Supplied alone - not mounted). 77
27881 Kimo PE458.08 Alone - Connection gland type PE458.08 for fixed installation of straight Pitot tubes and probes diameter 8 mm. (Supplied alone - not mounted). 58
27880 Kimo PE458.06 Alone - Connection gland type PE458.06 for fixed installation of straight Pitot tubes and probes diameter 6 mm. (Supplied alone - not mounted). 50
27879 Kimo PE458.03 Alone - Connection gland type PE458.03 for fixed installation of straight Pitot tubes diameter 3 mm. (Supplied alone - not mounted). 49
27878 Kimo SICA 130 KIT 2AS CO-H2 - Combustion analyzer Si-CA 130 Kit 2AS with touch screen, 2 electrochemical gas sensors (O2, CO-H2) upgradeable to a 3rd sensor (NO or NO low range), automatic pump cut-off protection for sensors, 180 mm sampling probe with 2 m hose and water trap with filter, magnetic support, protective rubber holster, vinyl carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 1259
27877 Kimo CO-H2 SENSOR 130 REP. - Interchangeable electrochemical CO-H2 sensor (with H2 compensation) for CO sensor replacement on Si-CA 130. Carbon monoxide measuring range: 0 - 8000 ppm. (Spare part). 357
27873 Kimo C310-BO + SPI21000 - C310-BO + SPI21000 749
27841 Kimo Si-DPMS-5 - Differential pressure switch Si-DPMS-5. Range 1000-5000 Pa. Max. overload 5 kPa. 2x 6 mm pressure inlets. IP54, working temperature from -20 to 80°C. Output relay SPDT 1.5 A/250 Vac. Delivered with 1.5 m clear PVC tube, 2x pressure connectors and electrical terminals. 34
27840 Kimo Si-DPMS-4 - Differential pressure switch Si-DPMS-4. Range 500-2500 Pa. Max. overload 5 kPa. 2x 6 mm pressure inlets. IP54, working temperature from -20 to 80°C. Output relay SPDT 1.5 A/250 Vac. Delivered with 1.5 m clear PVC tube, 2x pressure connectors and electrical terminals. 34
27839 Kimo Si-DPMS-3 - Differential pressure switch Si-DPMS-3. Range 200-1000 Pa. Max. overload 5 kPa. 2x 6 mm pressure inlets. IP54, working temperature from -20 to 80°C. Output relay SPDT 1.5 A/250 Vac. Delivered with 1.5 m clear PVC tube, 2x pressure connectors and electrical terminals. 34
27838 Kimo Si-DPMS-2 - Differential pressure switch Si-DPMS-2. Range 50-500 Pa. Max. overload 5 kPa. 2x 6 mm pressure inlets. IP54, working temperature from -20 to 80°C. Output relay SPDT 1.5 A/250 Vac. Delivered with 1.5 m clear PVC tube, 2x pressure connectors and electrical terminals. 34
27837 Kimo Si-DPMS-1 - Differential pressure switch Si-DPMS-1. Range 20-200 Pa. Max. overload 5 kPa. 2x 6 mm pressure inlets. IP54, working temperature from -20 to 80°C. Output relay SPDT 1.5 A/250 Vac. Delivered with 1.5 m clear PVC tube, 2x pressure connectors and electrical terminals. 34
27820 Kimo O2S Customer Activation - O2S Customer Activation 92
27819 Kimo RS5 Customer Activation - RS5 Customer Activation 85
27818 Kimo HRP Customer Activation - HRP Customer Activation 74
27816 Kimo C4R Alone - C4R Alone 82
27815 Kimo SQR/3 Customer Activation - SQR/3 Customer Activation 110
27815 Kimo SQR/3 Customer Activation - SQR/3 Customer Activation 110
27814 Kimo TJ150 AWS10 PA RULER - Scale ruler in Pa for liquid column manometer type TJ150 AWS10. Scale : 0-1500 Pa 13
27813 Kimo TJ150 AWS10 MBAR RULER - Scale ruler in mbar for liquid column manometer type TJ150 AWS10. Scale : 0-15 mbar 13
27812 Kimo TJ150 AWS10 MMH2O RULER - Scale ruler in mmH2O for liquid column manometer type TJ150 AWS10. Scale : 0-150 mmH2O 13
27811 Kimo TJ100 AWS10 PA RULER - Scale ruler in Pa for liquid column manometer type TJ100 AWS10. Scale : 0-1000 Pa 13
27810 Kimo TJ100 AWS10 MBAR RULER - Scale ruler in mbar for liquid column manometer type TJ100 AWS10. Scale : 0-10 mbar 13
27809 Kimo TJ100 AWS10 MMH2O RULER - Scale ruler in mmH2O for liquid column manometer type TJ100 AWS10. Scale : 0-100 mmH2O 13
27742 Kimo DRAFT CAP SICAX30(SP) - Hose cap to allow the draft to be measured when the analyzer pump is running. (Spare part) 6
27731 Kimo CENTERING CONE  (SP) - Centering/positioning cone with screw for all flue gas sampling probes for Si-CA 030/130/320. (Spare part) 39
27729 Kimo WATER TRAP FILTER (SP) - Pack of five (5) filters that mount inside water trap for Si-CA 030/130/230. (Spare part) 45
27638 Kimo H2S SENSOR 230 REP. - Interchangeable electrochemical H2S sensor for H2S sensor replacement on Si-CA 230. Hydrogen sulfide measuring range: 0 - 500 ppm. (Spare part). 732
27637 Kimo CXHY SENSOR 230 REP. - Interchangeable CxHy hydrocarbon sensor for CxHy sensor replacement on Si-CA 230. CxHy measuring range: 0 - 5%. (Spare part). 503
27636 Kimo LOW SO2 SENSOR 230 REP. - Interchangeable electrochemical SO2 low range sensor for SO2 low range sensor replacement on Si-CA 230. Sulfur dioxide measuring low range: 0 - 100 ppm. (Spare part). 503
27635 Kimo SO2 SENSOR 230 REP. - Interchangeable electrochemical SO2 sensor for SO2 sensor replacement on Si-CA 230. Sulfur dioxide measuring range: 0 - 5000 ppm. (Spare part). 503
27634 Kimo LOW NO2 SENSOR 230 REP. - Interchangeable electrochemical NO2 low range sensor for NO2 low range sensor replacement on Si-CA 230. Nitrogen dioxide measuring low range: 0 - 100 ppm. (Spare part). 503
27633 Kimo NO2 SENSOR 230 REP. - Interchangeable electrochemical NO2 sensor for NO2 sensor replacement on Si-CA 230. Nitrogen dioxide measuring range: 0 - 1000 ppm. (Spare part). 503
27632 Kimo LOW NO SENS. 130/230 REP - Interchangeable electrochemical NO low range sensor for NO low range sensor replacement on Si-CA 130/230. Nitrogen monoxide measuring low range: 0 - 300 ppm. (Spare part). 503
27631 Kimo NO SENSOR 130/230 REP. - Interchangeable electrochemical NO sensor for NO sensor replacement on Si-CA 130/230. Nitrogen monoxide measuring range: 0 - 5000 ppm. (Spare part). 503
27630 Kimo CO SENSOR 230 REP - Interchangeable electrochemical CO sensor (with H2 compensation) for CO sensor replacement on Si-CA 230. Carbon monoxide measuring range: 0 - 10000 ppm. (Spare part). 503
27629 Kimo CO SENSOR 130 REP. - Interchangeable electrochemical CO sensor for CO sensor replacement on Si-CA 130. Carbon monoxide measuring range: 0 - 8000 ppm. (Spare part). 357
27628 Kimo O2 SENSOR 130/230 REP. - Interchangeable electrochemical O2 sensor for O2 sensor replacement on Si-CA 130/230. Oxygen measuring range: 0 - 25%. (Spare part). 198
27611 Kimo SICA 230 KIT 6NLDLSLH - Combustion analyzer Si-CA 230 Kit 6NLDLSLH with touch screen, 6 electrochemical gas sensors (O2, CO, NO low range, NO2 low range, SO2 low range, H2S), automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 4068
27610 Kimo SICA 230 KIT 6NDSH - Combustion analyzer Si-CA 230 Kit 6NDSH with touch screen, 6 electrochemical gas sensors (O2, CO, NO, NO2, SO2, H2S), automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 3852
27609 Kimo SICA 230 KIT 6NDSC - Combustion analyzer Si-CA 230 Kit 6NDSC with touch screen, 6 electrochemical gas sensors (O2, CO, NO, NO2, SO2, CxHy), automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 3852
27608 Kimo SICA 230 KIT 5NLDLSL - Combustion analyzer Si-CA 230 Kit 5NLDLSL with touch screen, 5 electrochemical gas sensors (O2, CO, NO low range, NO2 low range, SO2 low range) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 3255
27607 Kimo SICA 230 KIT 5NSH - Combustion analyzer Si-CA 230 Kit 5NSH with touch screen, 5 electrochemical gas sensors (O2, CO, NO, SO2, H2S) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 3280
27606 Kimo SICA 230 KIT 5NSC - Combustion analyzer Si-CA 230 Kit 5NSC with touch screen, 5 electrochemical gas sensors (O2, CO, NO, SO2, CxHy) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 3280
27605 Kimo SICA 230 KIT 5NDC - Combustion analyzer Si-CA 230 Kit 5NDC with touch screen, 5 electrochemical gas sensors (O2, CO, NO, NO2, CxHy) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 3280
27604 Kimo SICA 230 KIT 5NDS - Combustion analyzer Si-CA 230 Kit 5NDS with touch screen, 5 electrochemical gas sensors (O2, CO, NO, NO2, SO2) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 3039
27603 Kimo SICA 230 KIT 4NLSL - Combustion analyzer Si-CA 230 Kit 4NLSL with touch screen, 4 electrochemical gas sensors (O2, CO, NO low range, SO2 low range) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 2682
27602 Kimo SICA 230 KIT 4NLDL - Combustion analyzer Si-CA 230 Kit 4NLDL with touch screen, 4 electrochemical gas sensors (O2, CO, NO low range, NO2 low range) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 2682
27601 Kimo SICA 230 KIT 4NC - Combustion analyzer Si-CA 230 Kit 4NC with touch screen, 4 electrochemical gas sensors (O2, CO, NO, CxHy) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 2708
27600 Kimo SICA 230 KIT 4NS - Combustion analyzer Si-CA 230 Kit 4NS with touch screen, 4 electrochemical gas sensors (O2, CO, NO, SO2) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 2467
27599 Kimo SICA 230 KIT 4ND - Combustion analyzer Si-CA 230 Kit 4ND with touch screen, 4 electrochemical gas sensors (O2, CO, NO, NO2) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 2467
27598 Kimo SICA 230 KIT 3NL - Combustion analyzer Si-CA 230 Kit 3NL with touch screen, 3 electrochemical gas sensors (O2, CO, NO low range) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 2238
27597 Kimo SICA 230 KIT 3N - Combustion analyzer Si-CA 230 Kit 3N with touch screen, 3 electrochemical gas sensors (O2, CO, NO) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 1933
27558 Kimo USBC CABLE - SICA - USB type "C" cable for Si-CA 030/130/230 25
27557 Kimo CHARGER WITH PLUGS SICA - Mains AC power supply/charger with various international plugs for Si-CA 030/130/230 64
27556 Kimo WATER TRAP ASSEMBLY SICA - Water trap with filter for Si-CA 030/130/230, includes hose & metal hose connector. 90
27555 Kimo WATER TRAP SICA - Water trap with filter for Si-CA 030/130/230. Without hose & without metal hose connector. 70
27554 Kimo RUB. HOLSTER SICA230 - Protective rubber holster for Si-CA 230. 96
27553 Kimo RUB. HOLSTER SICA030/130 - Protective rubber holster for Si-CA 030/130. 77
27552 Kimo SINTERED FILTER SICA - Sintered metal filter that mounts to the tip of all flue gas probes for the Si-CA 030/130/230 319
27550 Kimo KEG3 KIT - SICAX30 - KEG-3 type gas network leak test kit for Si-CA 130/230 with various accessories for pressurizing and connection to the gas network 287
27548 Kimo CO2 AMB. PROBE - SICAX30 - Ambient CO2 probe with 0-5000 ppm CO2 range, compatible with Si-CA 030 optional internal board included and all Si-CA 130/230 542
27547 Kimo CO AMB. PROBE - SICAX30 - Ambient CO probe with 0-500 ppm CO range, compatible with Si-CA 030 optional internal board included and all Si-CA 130/230 497
27546 Kimo 27546 - Remote thermal printer with wireless connection for Si-CA 030/130/230. 205
27544 Kimo DRAFT PROBE SICAX30 - Draft measurement probe with fittings and hose for Si-CA 030/130/230, allows for simultaneous measuring & saving of draft and combustion analysis 140
27540 Kimo ABS CASE SICAX30 - Hard ABS plastic carrying case for Si-CA 030/130/230 233
27539 Kimo VINYL CASE SICA - Soft vinyl carrying case with shoulder strap for Si-CA 030/130/230 140
27538 Kimo DP HOSE KIT SICAX30 - Differential pressure measurement hose kit comprised of two hoses of 1m (40") each with connectors, for differential  pressure measurements with Si-CA 030/130/230 and also for stack velocity measurements using a "S" type Pitot tube (optional) with Si-CA 130/230 64
27537 Kimo HOSE EXTENSION SICAX30 - Dual hose extension, 3m (10') long, with metal hose connectors and TcK cable/connectors, compatible with flue gas probes for Si-CA 030/130/230 230
27536 Kimo 1.5M PROBE SICAX30 - Flue gas sampling probe, 1.5m (60") probe length with 3m (10') dual hose, rated to 1200°C (2190°F) max, includes water trap with filter for Si-CA 030/130/230 954
27535 Kimo 1M PROBE SICAX30 - Flue gas sampling probe, 1m (40") probe length with 3m (10') dual hose, rated to 1200°C (2190°F) max, includes water trap with filter for Si-CA 030/130/230 700
27534 Kimo 750MM PROBE SICAX30 - Flue gas sampling probe, 750mm (30") probe length with 3m (10') dual hose, rated to 800°C (1470°F) max, includes water trap with filter for Si-CA 030/130/230 497
27533 Kimo 300MM PROBE SICAX30 - Flue gas sampling probe, 300mm (12") probe length with 3m (10') dual hose, rated to 800°C (1470°F) max, includes water trap with filter for Si-CA 030/130/230 332
27532 Kimo 180MM PROBE SICAX30 - Flue gas sampling probe, 180mm (7") probe length with 2m (6') dual hose, rated to 800°C (1470°F) max, includes water trap with filter for Si-CA 030/130/230 268
27525 Kimo CO SENSOR 030 REP - Replacement electrochemical CO sensor for Si-CA 030. Carbon monoxide measuring range: 0 - 8000 ppm. Sensor replacement requires an adjustment of the sensor with the analyzer. (Spare part). #N/A
27524 Kimo O2 SENSOR 030 REP. - Replacement electrochemical O2 sensor for Si-CA 030. Oxygen measuring range: 0 - 25%. (Spare part). 164
27522 Kimo SICA 230 KIT2 - Combustion analyzer Si-CA 230 Kit 2 with touch screen, 2 electrochemical gas sensors (O2, CO) upgradeable to maximum of 6 sensors total, automatic CO dilution, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, ABS plastic carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 1680
27517 Kimo SICA 130 KIT 3LOWBS - Combustion analyzer Si-CA 130 Kit 3LowBS with touch screen, 3 electrochemical gas sensors (O2, CO, NO low range), automatic pump cut-off protection for sensors, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, vinyl carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 1895
27513 Kimo SICA 130 KIT 3BS - Combustion analyzer Si-CA 130 Kit 3BS with touch screen, 3 electrochemical gas sensors (O2, CO, NO), automatic pump cut-off protection for sensors, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, vinyl carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 1678
27509 Kimo SICA 130 KIT 2BS - Combustion analyzer Si-CA 130 Kit 2BS with touch screen, 2 electrochemical gas sensors (O2, CO) upgradeable to a 3rd sensor (NO or NO low range), automatic pump cut-off protection for sensors, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, vinyl carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 1323
27507 Kimo SICA 130 KIT 2AS - Combustion analyzer Si-CA 130 Kit 2AS with touch screen, 2 electrochemical gas sensors (O2, CO) upgradeable to a 3rd sensor (NO or NO low range), automatic pump cut-off protection for sensors, 180 mm sampling probe with 2 m hose and water trap with filter, magnetic support, protective rubber holster, vinyl carrying case, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). 2 years warranty. 1260
27506 Kimo NO SENSOR 030 REP. - Replacement electrochemical NO sensor for Si-CA 030. Nitrogen monoxide measuring range: 0 - 5000 ppm. Sensor replacement requires an adjustment of the sensor with the analyzer. (Spare part). #N/A
27503 Kimo SICA 030 KIT 3BS - Combustion analyzer Si-CA 030 Kit 3BS, with 3 electrochemical gas sensors (O2, CO, NO), automatic pump cut-off protection for sensors, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). Packaged in vinyl carrying case. 2 years warranty. 1387
27498 Kimo SICA 030 KIT 2BS - Combustion analyzer Si-CA 030 Kit 2BS, with 2 electrochemical gas sensors (O2, CO) upgradeable to a 3rd sensor (NO), automatic pump cut-off protection for sensors, 300 mm sampling probe with 3 m hose and water trap with filter, magnetic support, protective rubber holster, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). Packaged in vinyl carrying case. 2 years warranty. 1006
27496 Kimo SICA 030 KIT 2AS - Combustion analyzer Si-CA 030 Kit 2AS, with 2 electrochemical gas sensors (O2, CO) upgradeable to a 3rd sensor (NO), automatic pump cut-off protection for sensors, 180 mm sampling probe with 2 m hose and water trap with filter, magnetic support, protective rubber holster, power charger, USB cable, quick start guide and calibration certificate. Wireless communication for mobile application and remote printer (optional). Packaged in vinyl carrying case. 2 years warranty. 967
27127 Kimo CTV210-HOS-R-10M - CTV210-HOS-R-10M 455
27126 Kimo CTV210-HOS-R-05M - CTV210-HOS-R-05M 444
27125 Kimo CTV210-HNS-R-10M - CTV210-HNS-R-10M 417
27124 Kimo CTV210-HNS-R-05M - CTV210-HNS-R-05M 405
27123 Kimo CTV210-BOS-R-10M - CTV210-BOS-R-10M 417
27121 Kimo CTV210-BNS-R-10M - CTV210-BNS-R-10M 404
27120 Kimo CTV210-BNS-R-05M - CTV210-BNS-R-05M 392
27119 Kimo CTV110-VND150-10M - CTV110-VND150-10M 301
27118 Kimo CTV110-VND150-05M - CTV110-VND150-05M 290
27117 Kimo CTV110-VND150-10M - CTV110-VND150-10M 301
27116 Kimo CTV110-VND150-05M - CTV110-VND150-05M 290
27115 Kimo CTV110-VOD150-10M - CTV110-VOD150-10M 336
27114 Kimo CTV110-VOD150-05M - CTV110-VOD150-05M 325
27113 Kimo CTV110-VOD150-10M - CTV110-VOD150-10M 336
27112 Kimo CTV110-VOD150-05M - CTV110-VOD150-05M 325
27111 Kimo CTV110-AND300-10M - CTV110-AND300-10M 301
27110 Kimo CTV110-AND300-05M - CTV110-AND300-05M 290
27109 Kimo CTV110-AND150-10M - CTV110-AND150-10M 301
27108 Kimo CTV110-AND150-05M - CTV110-AND150-05M 290
27107 Kimo CTV110-AOD300-10M - CTV110-AOD300-10M 336
27106 Kimo CTV110-AOD300-05M - CTV110-AOD300-05M 325
27105 Kimo CTV110-AOD150-10M - CTV110-AOD150-10M 336
27104 Kimo CTV110-AOD150-05M - CTV110-AOD150-05M 325
27103 Kimo LR110-PN-10M - LR110-PN-10M 475
27102 Kimo LR110-PN-05M - LR110-PN-05M 463
27101 Kimo LR110-PO-10M - LR110-PO-10M 514
27100 Kimo LR110-PO-05M - LR110-PO-05M 502
27099 Kimo CR110-AO-10M - CR110-AO-10M 549
27098 Kimo CR110-PO-10M - CR110-PO-10M 549
27097 Kimo COT212-HOD-R-10M - COT212-HOD-R-10M 444
27096 Kimo COT212-HOD-R-05M - COT212-HOD-R-05M 432
27095 Kimo COT212-BND-R-10M - COT212-BND-R-10M 404
27094 Kimo COT212-BND-R-05M - COT212-BND-R-05M 392
27093 Kimo TH210-HODI300-R-10M - TH210-HODI300-R-10M 549
27092 Kimo TH210-HODI300-R-05M - TH210-HODI300-R-05M 537
27091 Kimo TH210-HODI150-R-10M - TH210-HODI150-R-10M 537
27090 Kimo TH210-HODI150-R-05M - TH210-HODI150-R-05M 526
27089 Kimo TH210-HODP300-R-10M - TH210-HODP300-R-10M 505
27088 Kimo TH210-HODP300-R-05M - TH210-HODP300-R-05M 494
27086 Kimo TH210-HODP150-R-10M - TH210-HODP150-R-10M 483
27085 Kimo TH210-HODP150-R-05M - TH210-HODP150-R-05M 472
27084 Kimo TH210-BODI300-R-10M - TH210-BODI300-R-10M 546
27083 Kimo TH210-BODI300-R-05M - TH210-BODI300-R-05M 535
27082 Kimo TH210-BODI150-R-10M - TH210-BODI150-R-10M 535
27080 Kimo TH210-BODP300-R-10M - TH210-BODP300-R-10M 503
27079 Kimo TH210-BODP300-R-05M - TH210-BODP300-R-05M 491
27078 Kimo TH210-BODP150-R-10M - TH210-BODP150-R-10M 480
27077 Kimo TH210-BODP150-R-05M - TH210-BODP150-R-05M 469
27076 Kimo TH210-BNDI300-R-10M - TH210-BNDI300-R-10M 496
27075 Kimo TH210-BNDI300-R-05M - TH210-BNDI300-R-05M 484
27074 Kimo TH210-BNDI150-R-10M - TH210-BNDI150-R-10M 472
27073 Kimo TH210-BNDI150-R-05M - TH210-BNDI150-R-05M 460
27072 Kimo TH210-BNDP300-R-10M - TH210-BNDP300-R-10M 440
27071 Kimo TH210-BNDP300-R-05M - TH210-BNDP300-R-05M 429
27070 Kimo TH210-BNDP150-R-10M - TH210-BNDP150-R-10M 430
27069 Kimo TH210-BNDP150-R-05M - TH210-BNDP150-R-05M 418
27068 Kimo TH110-AND-10M - TH110-AND-10M 277
27067 Kimo TH110-AND-05M - TH110-AND-05M 265
27066 Kimo TH110-AOD-10M - TH110-AOD-10M 313
27065 Kimo TH110-AOD-05M - TH110-AOD-05M 301
27064 Kimo TH110-PND-10M - TH110-PND-10M 277
27063 Kimo TH110-PND-05M - TH110-PND-05M 265
27062 Kimo TH110-POD-10M - TH110-POD-10M 313
27061 Kimo TH110-POD-05M - TH110-POD-05M 301
27060 Kimo HM110-AND-10M - HM110-AND-10M 216
27059 Kimo HM110-AND-05M - HM110-AND-05M 205
27058 Kimo HM110-PND-10M - HM110-PND-10M 216
27057 Kimo HM110-PND-05M - HM110-PND-05M 205
27056 Kimo HST-D-10M - HST-D-10M 221
27055 Kimo HST-D-05M - HST-D-05M 209
26986 Kimo GF1000  VF1 MBAR - GF1000  VF1 MBAR 175
26985 Kimo GF500  VF1 MBAR - GF500  VF1 MBAR 114
26981 Kimo HP5 MMH2O SCALE RULER - Scale ruler in mmH2O for liquid column manometer type HP5. Scale : 0-5 mmH2O 10
26980 Kimo HP5 PA SCALE RULER - Scale ruler in Pa for liquid column manometer type HP5. Scale : 0-50 Pa 10
26979 Kimo HP10 MMH2O SCALE RULER - Scale ruler in mmH2O for liquid column manometer type HP10. Scale : 0-10 mmH2O 10
26978 Kimo HP10 PA SCALE RULER - Scale ruler in Pa for liquid column manometer type HP10. Scale : 0-100 Pa 10
26977 Kimo HP15 MMH2O SCALE RULER - Scale ruler in mmH2O for liquid column manometer type HP15. Scale : 0-15 mmH2O 10
26976 Kimo HP15 PA SCALE RULER - Scale ruler in Pa for liquid column manometer type HP15. Scale : 0-150 Pa 10
26975 Kimo KX205 MMH2O SCALE RULER - Scale ruler in mmH2O for liquid column manometer type KX205. Scale : 25-0-25 mmH2O 10
26974 Kimo KX205 PA SCALE RULER - Scale ruler in Pa for liquid column manometer type KX205. Scale : 250-0-250 Pa 10
26973 Kimo KX404 MMH2O SCALE RULER - Scale ruler in mmH2O for liquid column manometer type KX404. Scale : 40-0-40 mmH2O 10
26972 Kimo KX404 PA SCALE RULER - Scale ruler in Pa for liquid column manometer type KX404. Scale : 400-0-400 Pa 10
26971 Kimo TX25 MMH2O SCALE RULER - Scale ruler in mmH2O for liquid column manometer type TX25. Scale : 2,5-0-2,5 mmH2O 10
26970 Kimo TX25 PA SCALE RULER - Scale ruler in Pa for liquid column manometer type TX25. Scale : 25-0-25 Pa 10
26969 Kimo TX75 PA SCALE RULER - Scale ruler in Pa for liquid column manometer type TX75. Scale : 75-0-75 Pa 10
26968 Kimo TX50 PA SCALE RULER - Scale ruler in Pa for liquid column manometer type TX50. Scale : 50-0-50 Pa 10
26967 Kimo MG20 MMH2O SCALE RULER - Scale ruler in mmH2O for liquid column manometer type MG20. Scale : 0-20 mmH2O 10
26966 Kimo MG20 PA SCALE RULER - Scale ruler in Pa for liquid column manometer type MG20. Scale : 0-200 Pa 10
26965 Kimo MG50 MMH2O SCALE RULER - Scale ruler in mmH2O for liquid column manometer type MG50. Scale : 0-50 mmH2O 10
26964 Kimo MG50 PA SCALE RULER - Scale ruler in Pa for liquid column manometer type MG50. Scale : 0-500 Pa 10
26963 Kimo MG80 MMH2O SCALE RULER - Scale ruler in mmH2O for liquid column manometer type MG80. Scale : 0-80 mmH2O 10
26962 Kimo MG80 PA SCALE RULER - Scale ruler in Pa for liquid column manometer type MG80. Scale : 0-800 Pa 10
26961 Kimo GF500 MBAR SCALE RULER - Scale ruler in mbar for liquid column manometer type GF500. Scale : 25-0-25 mbar 16
26960 Kimo GF1000 MMH2O SCALE RULER - Scale ruler in mmH2O for liquid column manometer type GF1000. Scale : 500-0-500 mmH2O 22
26959 Kimo LU100 AWS10 MBAR RULER - Scale ruler in mbar for liquid column manometer type LU100 AWS10. Scale : 5-0-5 mbar 10
26958 Kimo LU100 VOLT1S MBAR RULER - Scale ruler in mbar for liquid column manometer type LU100 Volt1S. Scale : 11-0-11 mbar 10
26957 Kimo LU200 AWS10 MBAR RULER - Scale ruler in mbar for liquid column manometer type LU200 AWS10. Scale : 10-0-10 mbar 13
26956 Kimo LU200 VOLT1S MBAR RULER - Scale ruler in mbar for liquid column manometer type LU200 Volt1S. Scale : 22-0-22 mbar 13
26955 Kimo LU400 AWS10 MBAR RULER - Scale ruler in mbar for liquid column manometer type LU400 AWS10. Scale : 20-0-20 mbar 15
26954 Kimo LU400 VOLT1S MBAR RULER - Scale ruler in mbar for liquid column manometer type LU400 Volt1S. Scale : 44-0-44 mbar 15
26811 Kimo SI-CA A-SCU - Sample conditioning Unit type Si-CA A-SCU for Si-CA and E1500, E4500, E6000. 293
26544 Kimo CP-TE - Programming cable for under head converter 626
26543 Kimo CP-RD - Programming cable for rail DIN converter 136
26500 Kimo CTV210-BOS-R-05M - CTV210-BOS-R-05M 405
26499 Kimo C310-BO + SPI2100 - C310-BO + SPI2100 749
26497 Kimo TH210-BODI150-R-05M - TH210-BODI150-R-05M 523
26484 Kimo TJ600 AWS10 MBAR RULER - Scale ruler in mbar for liquid column manometer type TJ600 AWS10. Scale : 0-60 mbar 16
26483 Kimo TJ300 AWS10 MBAR RULER - Scale ruler in mbar for liquid column manometer type TJ300 AWS10. Scale : 0-30 mbar 13
26482 Kimo TJ1000 AWS10 MBAR RULER - Scale ruler in mbar for liquid column manometer type TJ1000 AWS10. Scale : 0-100 mbar 21
26466 Kimo  DBM RODS - Set of 4 frame rods with sheath for DBM620 type DBM Rods. 123
26465 Kimo DBM TROLLEY - Transport case for DBM620 with casters and handle type DBM Trolley. 306
26463 Kimo ACC-D8 - Measuring hood for DBM620 type ACC-D8. Sizes 1020x1020mm (3,35'x3,35'). Supplied without foldable frame. 210
26462 Kimo ACC-D7 - Measuring hood for DBM620 type ACC-D7. Sizes 420x1520mm (1,38'x4,99'). Supplied without foldable frame. 210
26461 Kimo ACC-D6 - Measuring hood for DBM620 type ACC-D6. Sizes 720x1320mm (2,36'x4,33'). Supplied without foldable frame. 210
26460 Kimo ACC-D5 - Measuring hood for DBM620 type ACC-D5. Sizes 720x720mm (2,36'x2,36'). Supplied without foldable frame. 210
26459 Kimo ACC-D3 - Measuring hood for DBM620 type ACC-D3 with airflow straightener. Sizes 610x610mm (2'x2'). Supplied without foldable frame. 249
26458 Kimo DBM-TH - Temperature and humidity probe type DBM-TH with fixing plate. For DBM620. 287
26457 Kimo DBM HINGES - Hinges kit for folding frame type DBM Hinges. One part of the three types of hinges. For DBM620. 83
26456 Kimo DBMT-4 - Telescopic tripod with casters type DBM T-4. Height from 1.20 to 4m. Supplied with soft transport case. For DBM620 and Velocity grid DBM-VMG. 446
26455 Kimo DBM-VMG - Velocity measuring grid kit for DBM620 type DBM-VMG. Air velocity measurement on blowing ceiling. Supplied with articulated telescopic pole, positioning spacers (5, 15 and 25cm), 2x1m of silicone tube and transport backpack. 319
26454 Kimo HO625 - Measuring hood for DBM620 type HO-625. Sizes 1020x1020mm (3,35'x3,35'). Supplied with foldable frame and carrying bag. 433
26453 Kimo HO624 - Measuring hood for DBM620 type HO-624. Sizes 420x1520mm (1,38'x4,99'). Supplied with foldable frame and carrying bag. 407
26452 Kimo HO623 - Measuring hood for DBM620 type HO-623. Sizes 720x1320mm (2,36'x4,33'). Supplied with foldable frame and carrying bag. 420
26451 Kimo HO622 - Measuring hood for DBM620 type HO-622. Sizes 720x720mm (2,36'x2,36'). Supplied with foldable frame and carrying bag. 390
26450 Kimo HO621 - Measuring hood for DBM620 type HO-621 with airflow straightener for swirling diffuser. Sizes 610x610mm (2'x2'). Supplied with foldable frame and carrying bag. 390
26449 Kimo DBM 620A - Removable Bluetooth pressure measuring unit type DBM620A. Measuring ranges from 35 to 4250m3/h, +/-2500 Pa, 0,2 to 10 m/s. Micromanometer functions and mesure of air velocity / flow  with different probes (Pitot tube, Debimo blade, DBM VMG velocity grid). Supplied with 2x80cm of silicone tube and calibration certificate. The free SmartKapp mobile App is available for data reading and processing on smartphone or tablet. 1260
26448 Kimo DBM 620S - Electronic airflowmeter type DBM620S, measuring ranges from 35 to 4250 m3/h, +/-2500 Pa, 0,2 to 10 m/s, 0 to 100 %RH, -20 to 70 °C. Removable Bluetooth pressure measuring unit for use in micromanometer and anemometer mode with different probes (Pitot tube, Debimo blade, DBM VMG velocity grid). Supplied without hood, with base including temperature and humidity probe, pressure measuring unit, frame rods with sheath, 2x80cm of silicone tube, calibration certificate and transport case. The free SmartKapp mobile App is available for data reading and processing on smartphone or tablet. 2238
26447 Kimo DBM 620C - Electronic airflowmeter type DBM620C, measuring ranges from 35 to 4250 m3/h, +/-2500 Pa, 0,2 to 10 m/s, 0 to 100 %RH, -20 to 70 °C.Removable Bluetooth pressure measuring unit for use in micromanometer and anemometer mode with different probes (Pitot tube, Debimo blade, DBM VMG velocity grid). Supplied with base including temperature and humidity probe, pressure measuring unit, 610x610mm (2'x2') hood including foldable frame and airflow straightener, 720x720mm (2,36'x2,36') / 720x1320mm (2,36'x4,33') / 420x1520mm (1,38'x4,99') / 1020x1020mm (3,35'x3,35') hoods with foldable frames, frame rods with sheath, 2x80cm of silicone tube, calibration certificate and transport case. The free SmartKapp mobile App is available for data reading and processing on smartphone or tablet. 4347
26446 Kimo DBM 620 - Electronic airflowmeter type DBM620, measuring ranges from 35 to 4250 m3/h, +/-2500 Pa, 0,2 to 10 m/s, 0 to 100 %RH, -20 to 70 °C. Removable Bluetooth pressure measuring unit for use in micromanometer and anemometer mode with different probes (Pitot tube, Debimo blade, DBM VMG velocity grid). Supplied with base including temperature and humidity probe, pressure measuring unit, 610x610mm (2'x2') hood including foldable frame and airflow straightener, frame rods with sheath, 2x80cm of silicone tube, calibration certificate and transport case. The free SmartKapp mobile App is available for data reading and processing on smartphone or tablet. 2518
26444 Kimo CO-RD-TCK - Configurable Rail-din mounting temperature converter Thermocoupe K, 4-20 mA output. Measuring range in temperature shall be confirmed on order 126
26443 Kimo ST50S-300-12G-CO - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 300mm (with 1/2 male BSP thread). Operating temperature : -50°C à +250°C. With Built in configurable PT100 converter. 4-20mA ouptut. Measuring range in temperature shall be confirmed on order 164
26442 Kimo ST50S-300-SRA-CO - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 300mm. Operating temperature : -50°C à +250°C. With Built in configurable PT100 converter. 4-20mA ouptut. Measuring range in temperature shall be confirmed on order 154
26441 Kimo ST50S-250-12G-CO - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 250mm (with 1/2 male BSP thread). Operating temperature : -50°C à +250°C. With Built in configurable PT100 converter. 4-20mA ouptut. Measuring range in temperature shall be confirmed on order 163
26440 Kimo ST50S-250-SRA-CO - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 250mm. Operating temperature : -50°C à +250°C. With Built in configurable PT100 converter. 4-20mA ouptut. Measuring range in temperature shall be confirmed on order 153
26439 Kimo ST50S-200-12G-CO - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 200mm (with 1/2 male BSP thread). Operating temperature : -50°C à +250°C. With Built in configurable PT100 converter. 4-20mA ouptut. Measuring range in temperature shall be confirmed on order 161
26438 Kimo ST50S-200-SRA-CO - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 200mm. Operating temperature : -50°C à +250°C. With Built in configurable PT100 converter. 4-20mA ouptut. Measuring range in temperature shall be confirmed on order 152
26437 Kimo ST50S-150-12G-CO - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 150mm (with 1/2 male BSP thread). Operating temperature : -50°C à +250°C. With Built in configurable PT100 converter. 4-20mA ouptut. Measuring range in temperature shall be confirmed on order 160
26436 Kimo ST50S-150-SRA-CO - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 150mm. Operating temperature : -50°C à +250°C. With Built in configurable PT100 converter. 4-20mA ouptut. Measuring range in temperature shall be confirmed on order 152
26435 Kimo ST50S-100-12G-CO - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 100mm (with 1/2 male BSP thread). Operating temperature : -50°C à +250°C. With Built in configurable PT100 converter. 4-20mA ouptut. Measuring range in temperature shall be confirmed on order 160
26434 Kimo ST50S-100-SRA-CO - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 100mm. Operating temperature : -50°C à +250°C. With Built in configurable PT100 converter. 4-20mA ouptut. Measuring range in temperature shall be confirmed on order 151
26433 Kimo ST50S-50-12G-CO - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 50mm (with 1/2 male BSP thread). Operating temperature : -50°C à +250°C. With Built in configurable PT100 converter. 4-20mA ouptut. Measuring range in temperature shall be confirmed on order 159
26432 Kimo ST50S-050-SRA-CO - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 50mm. Operating temperature : -50°C à +250°C. With Built in configurable PT100 converter. 4-20mA ouptut. Measuring range in temperature shall be confirmed on order 150
26418 Kimo TST-AI-6-300 - TST-AI-6-300 193
26417 Kimo TST-AI-6-250 - TST-AI-6-250 184
26416 Kimo TST-AI-6-200 - TST-AI-6-200 175
26415 Kimo TST-AI-6-150 - TST-AI-6-150 166
26414 Kimo TST-AI-6-100 - TST-AI-6-100 158
26413 Kimo CO-RD-PT100 - Configurable Rail-din mounting temperature converter PT100, 4-20 mA output. Measuring range in temperature shall be confirmed on order 126
26412 Kimo CO-TE - Configurable Pt100 temperature transmitter for mounting under head. 4-20 mA output. Measuring range in temperature shall be confirmed on order 85
26408 Kimo ECM300 V2 MMH2O 24V - 0-300 mmH2O / 24Vac/dc 497
26405 Kimo ECM150 V2 MMH2O 24V - 0-150 mmH2O / 24Vac/dc 497
26402 Kimo ECM300 V1 MMH2O 24V - ECM300 V1 MMH2O 24V 367
26399 Kimo ECM150 V1 MMH2O 24V - ECM150 V1 MMH2O 24V 322
26397 Kimo TJ150 AWS10 PA - TJ150 AWS10 PA 70
26395 Kimo TM110-ANAI-6-300 - TM110-ANAI-6-300 193
26394 Kimo TM110-ANAI-6-250 - TM110-ANAI-6-250 184
26393 Kimo TM110-ANAI-6-200 - TM110-ANAI-6-200 175
26392 Kimo TM110-ANAI-6-150 - TM110-ANAI-6-150 166
26391 Kimo TM110-AOAI-6-300 - TM110-AOAI-6-300 219
26390 Kimo TM110-AOAI-6-250 - TM110-AOAI-6-250 209
26389 Kimo TM110-AOAI-6-200 - TM110-AOAI-6-200 201
26388 Kimo TM110-AOAI-6-150 - TM110-AOAI-6-150 192
26387 Kimo TM110-AOAI-6-100 - TM110-AOAI-6-100 182
26386 Kimo TM110-PNAI-6-300 - TM110-PNAI-6-300 193
26385 Kimo TM110-PNAI-6-250 - TM110-PNAI-6-250 184
26384 Kimo TM110-PNAI-6-200 - TM110-PNAI-6-200 175
26383 Kimo TM110-PNAI-6-150 - TM110-PNAI-6-150 166
26382 Kimo TM110-PNAI-6-100 - TM110-PNAI-6-100 158
26381 Kimo TM110-POAI-6-250 - TM110-POAI-6-250 209
26380 Kimo TM110-POAI-6-200 - TM110-POAI-6-200 201
26379 Kimo TM110-POAI-6-100 - TM110-POAI-6-100 182
26377 Kimo DG-F-300 - Stainless steel thermowell with 1/2 male BSP thread Lg. 300mm 60
26376 Kimo DG-F-250 - Stainless steel thermowell with 1/2 male BSP thread Lg. 250mm 58
26375 Kimo DG-V-300 - Stainless steel thermowell with fixing screw  Lg. 300mm 58
26374 Kimo SFKI-SVB-3-3-1000 - Thermocouple K temperature probe class1. Deformable probe Ø3mm - Lg. 1000mm. Shielded Glass silk cable Lg. 3m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +400°C)  79
26373 Kimo SFKI-SVB-3-3-500 - Thermocouple K temperature probe class1. Deformable probe Ø3mm - Lg. 500mm. Shielded Glass silk cable Lg. 3m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +400°C)  67
26372 Kimo SFKI-SVB-3-3-100 - Thermocouple K temperature probe class1. Deformable probe Ø3mm - Lg. 100mm. Shielded Glass silk cable Lg. 3m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +400°C)  56
26371 Kimo SFKI-SVB-1-3-1000 - Thermocouple K temperature probe class1. Deformable probe Ø3mm - Lg. 1000mm. Shielded Glass silk cable Lg. 1m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +400°C)  72
26370 Kimo SFKI-SVB-1-3-500 - Thermocouple K temperature probe class1. Deformable probe Ø3mm - Lg. 500mm. Shielded Glass silk cable Lg. 1m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +400°C)  59
26369 Kimo SFKI-SVB-1-3-100 - Thermocouple K temperature probe class1. Deformable probe Ø3mm - Lg. 100mm. Shielded Glass silk cable Lg. 1m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +400°C)  49
26368 Kimo SFKI-TB-3-3-1000 - Thermocouple K temperature probe class1. Deformable probe Ø3mm - Lg. 100mm. Shielded PTFE cable Lg. 3m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +260°C)  79
26367 Kimo SFKI-TB-3-3-500 - Thermocouple K temperature probe class1. Deformable probe Ø3mm - Lg. 500mm. Shielded PTFE cable Lg. 3m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +260°C)  72
26366 Kimo SFKI-TB-3-3-100 - Thermocouple K temperature probe class1. Deformable probe Ø3mm - Lg. 100mm. Shielded PTFE cable Lg. 3m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +260°C)  67
26365 Kimo SFKI-TB-1-3-1000 - Thermocouple K temperature probe class1. Deformable probe Ø3mm - Lg. 100mm. Shielded PTFE cable Lg. 1m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +260°C)  64
26364 Kimo SFKI-TB-1-3-500 - Thermocouple K temperature probe class1. Deformable probe Ø3mm - Lg. 500mm. Shielded PTFE cable Lg. 1m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +260°C)  51
26363 Kimo SFKI-TB-1-3-100 - Thermocouple K temperature probe class1. Deformable probe Ø3mm - Lg. 100mm. Shielded PTFE cable Lg. 1m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +260°C)  45
26362 Kimo SFKI-SVB-3-1,5-1000 - Thermocouple K temperature probe class1. Deformable probe Ø1,5mm - Lg. 1000mm. Shielded Glass silk cable Lg. 3m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +400°C)  79
26361 Kimo SFKI-SVB-3-1,5-500 - Thermocouple K temperature probe class1. Deformable probe Ø1,5mm - Lg. 500mm. Shielded Glass silk cable Lg. 3m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +400°C)  67
26360 Kimo SFKI-SVB-3-1,5-100 - Thermocouple K temperature probe class1. Deformable probe Ø1,5mm - Lg. 100mm. Shielded Glass silk cable Lg. 3m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +400°C)  56
26359 Kimo SFKI-SVB-1-1,5-1000 - Thermocouple K temperature probe class1. Deformable probe Ø1,5mm - Lg. 1000mm. Shielded Glass silk cable Lg. 1m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +400°C)  72
26358 Kimo SFKI-SVB-1-1,5-500 - Thermocouple K temperature probe class1. Deformable probe Ø1,5mm - Lg. 500mm. Shielded Glass silk cable Lg. 1m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +400°C)  59
26357 Kimo SFKI-SVB-1-1,5-100 - Thermocouple K temperature probe class1. Deformable probe Ø1,5mm - Lg. 100mm. Shielded Glass silk cable Lg. 1m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +400°C)  49
26356 Kimo SFKI-TB-3-1,5-1000 - Thermocouple K temperature probe class1. Deformable probe Ø1,5mm - Lg. 100mm. Shielded PTFE cable Lg. 3m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +260°C)  72
26355 Kimo SFKI-TB-3-1,5-500 - Thermocouple K temperature probe class1. Deformable probe Ø1,5mm - Lg. 500mm. Shielded PTFE cable Lg. 3m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +260°C)  68
26354 Kimo SFKI-TB-3-1,5-100 - Thermocouple K temperature probe class1. Deformable probe Ø1,5mm - Lg. 100mm. Shielded PTFE cable Lg. 3m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +260°C)  65
26353 Kimo SFKI-TB-1-1,5-1000 - Thermocouple K temperature probe class1. Deformable probe Ø1,5mm - Lg. 100mm. Shielded PTFE cable Lg. 1m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +260°C)  64
26352 Kimo SFKI-TB-1-1,5-500 - Thermocouple K temperature probe class1. Deformable probe Ø1,5mm - Lg. 500mm. Shielded PTFE cable Lg. 1m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +260°C)  51
26351 Kimo SFKI-TB-1-1,5-100 - Thermocouple K temperature probe class1. Deformable probe Ø1,5mm - Lg. 100mm. Shielded PTFE cable Lg. 1m. Operating temperature : contact tip : -200°C to 1150°C (cable and pot seal mounting : -50°C to +260°C)  43
26329 Kimo TM110-ANAI-6-100 - TM110-ANAI-6-100 158
26326 Kimo TM110-POAI-6-300 - TM110-POAI-6-300 219
26322 Kimo TM110-POAI-6-150 - TM110-POAI-6-150 192
26139 Kimo Debimo 2501-2999 - Debimo 2501-2999 473
26138 Kimo Debimo 2001-2499 - Debimo 2001-2499 414
26137 Kimo Debimo 1501-1999 - Debimo 1501-1999 356
26135 Kimo Debimo 1001-1499 - Debimo 1001-1499 282
26134 Kimo Debimo 801-999 - Debimo 801-999 223
26133 Kimo Debimo 631-799 - Debimo 631-799 193
26132 Kimo Debimo 601-629 - Debimo 601-629 132
26131 Kimo Debimo 501-599 - Debimo 501-599 126
26130 Kimo Debimo 401-499 - Debimo 401-499 119
26129 Kimo Debimo 316-399 - Debimo 316-399 115
26128 Kimo Debimo 301-314 - Debimo 301-314 96
26127 Kimo Debimo 251-299 - Debimo 251-299 89
26126 Kimo Debimo 201-249 - Debimo 201-249 83
26125 Kimo Debimo 161-199 - Debimo 161-199 70
26124 Kimo Debimo 126-159 - Debimo 126-159 62
26122 Kimo Debimo 101-124 - Debimo 101-124 58
26121 Kimo Debimo < 100 - Debimo < 100 56
26095 Kimo ST50S-300-12G - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 300mm (with 1/2 male BSP thread). Operating temperature : -50°C à +250°C 91
26094 Kimo ST50S-300-SRA - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 300mm. Operating temperature : -50°C à +250°C 81
26093 Kimo ST50S-250-12G - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 250mm (with 1/2 male BSP thread). Operating temperature : -50°C à +250°C 90
26092 Kimo ST50S-250-SRA - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 250mm. Operating temperature : -50°C à +250°C 80
26091 Kimo ST50S-200-12G - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 200mm (with 1/2 male BSP thread). Operating temperature : -50°C à +250°C 89
26090 Kimo ST50S-200-SRA - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 200mm. Operating temperature : -50°C à +250°C 79
26089 Kimo ST50S-150-12G - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 150mm (with 1/2 male BSP thread). Operating temperature : -50°C à +250°C 88
26088 Kimo ST50S-150-SRA - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 150mm. Operating temperature : -50°C à +250°C 79
26087 Kimo ST50S-100-12G - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 100mm (with 1/2 male BSP thread). Operating temperature : -50°C à +250°C 87
26086 Kimo ST50S-100-SRA - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 100mm. Operating temperature : -50°C à +250°C 78
26085 Kimo ST50S-50-12G - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 50mm (with 1/2 male BSP thread). Operating temperature : -50°C à +250°C 86
26084 Kimo ST50S-50-SRA - Head temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 50mm. Operating temperature : -50°C à +250°C 77
26053 Kimo SF50-TS-5-150 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 150mm. PTFE cable - Lg. 5m. Operating temperature : -50°C à +260°C 78
26051 Kimo SF50-TS-5-100 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 100mm. PTFE cable - Lg. 5m. Operating temperature : -50°C à +260°C 77
26049 Kimo SF50-TS-5-50 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 50mm. PTFE cable - Lg. 5m. Operating temperature : -50°C à +260°C 73
26047 Kimo SF50-TS-2-150 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 150mm. PTFE cable - Lg. 2m. Operating temperature : -50°C à +260°C 51
26045 Kimo SF50-TS-2-100 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 100mm. PTFE cable - Lg. 2m. Operating temperature : -50°C à +260°C 49
26043 Kimo SF50-TS-2-50 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 50mm. PTFE cable - Lg. 2m. Operating temperature : -50°C à +260°C 46
26041 Kimo SF50-TS-1-150 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 150mm. PTFE cable - Lg. 1m. Operating temperature : -50°C à +260°C 42
26039 Kimo SF50-TS-1-100 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 100mm. PTFE cable - Lg. 1m. Operating temperature : -50°C à +260°C 40
26037 Kimo SF50-TS-1-50 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 50mm. PTFE cable - Lg. 1m. Operating temperature : -50°C à +260°C 37
26005 Kimo SF50-PS-5-150 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 150mm. PVC cable - Lg. 5m. Operating temperature : -40°C à +105°C 40
26003 Kimo SF50-PS-5-100 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 100mm. PVC cable - Lg. 5m. Operating temperature : -40°C à +105°C 36
26001 Kimo SF50-PS-5-50 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 50mm. PVC cable - Lg. 5m. Operating temperature : -40°C à +105°C 33
25999 Kimo SF50-PS-2-150 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 150mm. PVC cable - Lg. 2m. Operating temperature : -40°C à +105°C 36
25997 Kimo SF50-PS-2-100 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 100mm. PVC cable - Lg. 2m. Operating temperature : -40°C à +105°C 33
25995 Kimo SF50-PS-2-50 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 50mm. PVC cable - Lg. 2m. Operating temperature : -40°C à +105°C 30
25993 Kimo SF50-PS-1-150 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 150mm. PVC cable - Lg. 1m. Operating temperature : -40°C à +105°C 33
25991 Kimo SF50-PS-1-100 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 100mm. PVC cable - Lg. 1m. Operating temperature : -40°C à +105°C 30
25989 Kimo SF50-PS-1-50 - Cable temperature probe with resistive element PT100 class A. Probe Ø6mm - Lg. 50mm. PVC cable - Lg. 1m. Operating temperature : -40°C à +105°C 27
25822 Kimo SKP2000B  - SKP2000-B Thermocouple K probe, class 1, ( -20 +150°C) stainless steel 316L protective sheath Ø 16 x 2 mm, length 2000 mm with sharp tip. T-shape handle, 2 x 150 mm, diameter 21,3 mm. IP65 housing with transparent cover, EPDM seal and machined foam for Kistock KTT 220 or 320 and RF (supplied without the recorder). Housing 170x140x95 mm mounted horizontally on the probe. Output on cable length 20 cm with miniature male compensated connector inside the housing (Tr 99%: 165 sec) 419
25821 Kimo SKP1500B - SKP1500-B Thermocouple K probe, class 1, ( -20 +150°C) stainless steel 316L protective sheath Ø 16 x 2 mm, length 1500 mm with sharp tip. T-shape handle, 2 x 150 mm, diameter 21,3 mm. IP65 housing with transparent cover, EPDM seal and machined foam for Kistock KTT 220 or 320 and RF (supplied without the recorder). Housing 170x140x95 mm mounted horizontally on the probe. Output on cable length 20 cm with miniature male compensated connector inside the housing (Tr 99%: 165 sec) 353
25820 Kimo SKP1000B  - SKP1000-B Thermocouple K probe, class 1, ( -20 +150°C) stainless steel 316L protective sheath Ø 16 x 2 mm, length 1000 mm with sharp tip. T-shape handle, 2 x 150 mm, diameter 21,3 mm. IP65 housing with transparent cover, EPDM seal and machined foam for Kistock KTT 220 or 320 and RF (supplied without the recorder). Housing 170x140x95 mm mounted horizontally on the probe. Output on cable length 20 cm with miniature male compensated connector inside the housing (Tr 99%: 165 sec) 324
25729 Kimo SCPK-150 - Thermocouple K contact probe, flat tip, class 1 (-20 to +150°C). Stainless steel probe Ø 4,5 mm, length 150mm with handle, retractable cable, miniature male compensated connector.  (Tr 99% : 20 sec) 45
25668 Kimo COT212-HOD-R - COT212-HOD-R 417
25667 Kimo COT212-HOS-R - COT212-HOS-R 394
25666 Kimo COT212-BND-R - COT212-BND-R 377
25665 Kimo COT212-BNS-R - COT212-BNS-R 362
25664 Kimo CTV210-HOS-R - CTV210-HOS-R 429
25663 Kimo CTV210-HNS-R - CTV210-HNS-R 390
25661 Kimo CTV210-BOS-R - CTV210-BOS-R 390
25660 Kimo CTV210-BNS-R - CTV210-BNS-R 377
25659 Kimo TM210-BOS-R - TM210-BOS-R 321
25658 Kimo TM210-BOB-R - TM210-BOB-R 314
25657 Kimo TH210-HODI300-R - TH210-HODI300-R 522
25656 Kimo TH210-HODI150-R - TH210-HODI150-R 511
25655 Kimo TH210-HODP300-R - TH210-HODP300-R 479
25654 Kimo TH210-HODP150-R - TH210-HODP150-R 456
25653 Kimo TH210-HOSP-R - TH210-HOSP-R 442
25652 Kimo TH210-BODI300-R - TH210-BODI300-R 519
25651 Kimo TH210-BODI150-R - TH210-BODI150-R 508
25650 Kimo TH210-BODP300-R - TH210-BODP300-R 476
25649 Kimo TH210-BODP150-R - TH210-BODP150-R 454
25648 Kimo TH210-BOSP-R - TH210-BOSP-R 440
25647 Kimo TH210-BNDI300-R - TH210-BNDI300-R 469
25646 Kimo TH210-BNDI150-R - TH210-BNDI150-R 445
25645 Kimo TH210-BNDP300-R - TH210-BNDP300-R 413
25644 Kimo TH210-BNDP150-R - TH210-BNDP150-R 403
25643 Kimo TH210-BNSP-R - TH210-BNSP-R 389
25642 Kimo CP213-HO-R - CP213-HO-R 448
25641 Kimo CP213-HN-R - CP213-HN-R 390
25640 Kimo CP213-BO-R - CP213-BO-R 434
25639 Kimo CP213-BN-R - CP213-BN-R 377
25638 Kimo CP212-HO-R - CP212-HO-R 504
25637 Kimo CP212-HN-R - CP212-HN-R 426
25636 Kimo CP212-BO-R - CP212-BO-R 487
25635 Kimo CP212-BN-R - CP212-BN-R 407
25634 Kimo CP211-HO-R - CP211-HO-R 537
25633 Kimo CP211-HN-R - CP211-HN-R 454
25632 Kimo CP211-BN-R - CP211-BN-R 440
25631 Kimo CP211-BO-R - CP211-BO-R 532
25526 Kimo CQT - Protective cover made of Elastomere for TT21 & 22 thermometers. 23
25523 Kimo TT 22 - Thermocouple K, T, 2-channel portable thermometer (-200 to + 1300°C), 1-line display. Functions : Hold, Min, Max, Delta T, change of unit, configurable auto switch-off and selection of thermocouple type. Supplied with batteries and adjustment certificate. 118
25520 Kimo TT 21     - Thermocouple K, T, 1-channel portable thermometer (-200 to + 1300°C), 1-line display. Functions: Hold, Min, Max, change of unit, configurable auto switch-off and selection of thermocouple type. Supplied with batteries and adjustment certificate. 89
25516 Kimo TR 62  - Pt100 portable thermometer, 2-channel (-100 to +400°C), 2-line display. Functions: Hold, Min, Max, Delta T, backlit display, alarms, change of unit and configurable auto switch-off. Supplied with batteries and adjustment certificate. 140
25515 Kimo TR 61       - Pt100 portable thermometer, 1-channel (-100 to +400°C), 2-line display. Functions: Hold, Min, Max, backlit display, alarms, change of unit and configurable auto switch-off. Supplied with batteries and adjustment certificate. 111
25514 Kimo TK 62      - Thermocouple K, J, T, S, 2-channel portable thermometer (-200 to + 1760°C), 2-line display, Functions : Hold, Min Max, Delta T, backlit display, alarm, change of unit, configurable auto switch-off and selection of thermocouple type. Supplied with batteries and adjustment certificate. 140
25513 Kimo TK 61      - Thermocouple K, J, T, S, 1-channel portable thermometer (-200 to + 1760°C), 2-line display. Functions: Hold, Min, Max, backlit display, alarm, change of unit, configurable auto switch-off and selection of thermocouple type. Supplied with batteries and adjustment certificate. 115
25442 Kimo ECM60 V2 PA 24V - ECM60 V2 PA 24V 452
25441 Kimo ECM60 V2 PA 230V - ECM60 V2 PA 230V 452
25440 Kimo ECM60 V2 MMH2O 24V - ECM60 V2 MMH2O 24V 452
25439 Kimo ECM20 V2 PA 24V - ECM20 V2 PA 24V 452
25438 Kimo ECM20 V2 PA 230V - ECM20 V2 PA 230V 452
25437 Kimo ECM20 V2 MMH2O 24V - ECM20 V2 MMH2O 24V 452
25436 Kimo ECM88 V2 PA 24V - ECM88 V2 PA 24V 452
25435 Kimo ECM88 V2 PA 230V - ECM88 V2 PA 230V 452
25434 Kimo ECM88 V2 MMH2O 24V - ECM88 V2 MMH2O 24V 452
25433 Kimo ECM 60 V1 PA 24V - ECM 60 V1 PA 24V 347
25432 Kimo ECM 60 V1 MMH2O 230V - ECM 60 V1 MMH2O 230V 347
25431 Kimo ECM 60 V1 PA 24V - ECM 60 V1 PA 24V 347
25430 Kimo ECM20 V1 PA 24V - ECM20 V1 PA 24V 322
25429 Kimo ECM20 V1 PA 230V - ECM20 V1 PA 230V 322
25428 Kimo ECM20 V1 MMH2O 24V - ECM20 V1 MMH2O 24V 322
25427 Kimo ECM88 V1 PA 24V - ECM88 V1 PA 24V 346
25426 Kimo ECM88 V1 PA 230V - ECM88 V1 PA 230V 346
25425 Kimo ECM88 V1 MMH2O 24V - ECM88 V1 MMH2O 24V 346
25424 Kimo LU 400 VOLT1S MBAR - LU 400 VOLT1S MBAR 150
25423 Kimo LU 200 VOLT1S MBAR - LU 200 VOLT1S MBAR 115
25422 Kimo LU100 VOLT1S MBAR - LU100 VOLT1S MBAR 99
25421 Kimo LU400 AWS10 MBAR - LU400 AWS10 MBAR 78
25420 Kimo LU200 AWS10 MBAR - LU200 AWS10 MBAR 60
25419 Kimo LU100 AWS10 MBAR - LU100 AWS10 MBAR 51
25418 Kimo TJ1000 VOLT1S MBAR - TJ1000 VOLT1S MBAR 325
25417 Kimo TJ600 VOLT1S MBAR - TJ600 VOLT1S MBAR 240
25416 Kimo TJ300 VOLT1S MBAR - TJ300 VOLT1S MBAR 177
25415 Kimo TJ1000 AWS10 MBAR - TJ1000 AWS10 MBAR 181
25414 Kimo TJ600 AWS10 MBAR - TJ600 AWS10 MBAR 137
25413 Kimo TJ300 AWS10 MBAR - TJ300 AWS10 MBAR 91
25412 Kimo TJ150 AWS10 MBAR - TJ150 AWS10 MBAR 70
25411 Kimo TJ100 AWS10 MBAR - TJ100 AWS10 MBAR 63
25410 Kimo TJ100 AWS10 PA - TJ100 AWS10 PA 63
25409 Kimo MT40 PA - MT40 PA 181
25408 Kimo VH50 PA - VH50 PA 89
25407 Kimo TX75 PA - TX75 PA 112
25406 Kimo TX50 PA - TX50 PA 111
25404 Kimo TX25 PA - TX25 PA 106
25403 Kimo HP15 PA - HP15 PA 112
25402 Kimo HP10 PA - HP10 PA 109
25401 Kimo HP5 PA - HP5 PA 103
25400 Kimo KX404 PA - KX404 PA 120
25399 Kimo KX205 PA - KX205 PA 95
25398 Kimo MG80 PA - MG80 PA 114
25397 Kimo MG50 PA - MG50 PA 89
25396 Kimo MG20 PA - MG20 PA 77
25349 Kimo KIRV-320    - Velcro wire PT100 temperature probe, length 200mm, output on PVC cable length 2m, with Mini-Din connector (-20 +90 °C). For Class 320 Kistock. 59
25346 Kimo KSPE-2 - Relative pressure probe for liquids and gases (corrosive). Range 0-20 Bar, probe body made of stainless steel, length 93 mm, with 1/8" gas connector and 1/4" gas adaptor. PVC cable length 2m, mini-Din connector for Class 220 Kistock. 271
25344 Kimo KCV-220 - NTC Velcro wire temperature probe. Length 200mm, output on PVC cable length 2m, with Mini-Din connector (-20 +90 °C). 44
25330 Kimo MDK-15 - Demo case with dataloggers including:
1 KH-50, 1 KT-120, 1 KH-220-O, 1 KTT-220-N, 1 KT-320, 1 KP-320, 1 KAV-320, 1 KSPE, 1 KTHA, 1 KITHP-130, 1 CK50, 1 KNT-320 and KILOG-3-N software
1526
25322 Kimo KTHD             - Temperature/hygrometry interchangeable remote probe (5 to 95 %RH and -20 to +70°C). Probe body made of ABS, length 130mm, with stainless steel filter, PVC cable length 2m, with mini-Din connector for Class 220 KISTOCK. 173
25295 Kimo KSPP-150                - NTC penetration temperature probe, IP68. Stainless steel probe length 150mm, diameter 3mm, with stainless steel handle diameter 10mm. Output on PVC cable length 2m, with min-Din connector (-40 +120 °C). 100
25294 Kimo KSP-150                - NTC penetration temperature probe, IP65 protection. Stainless steel probe length 150mm, diameter 4.5mm, output on PVC cable length 1m, with mini-Din connector (-40 +120 °C). For Class 220 KISTOCK. 46
25292 Kimo KSF-2                - NTC wire temperature probe. PVC cable length 2m, diameter 3mm, within mini-Din connector (-20 +100 °C). 25
25291 Kimo KSI-150                - NTC immersion temperature probe, stainless steel probe length 150mm, diameter 6mm. Output on PVC cable length 2m, with mini-Din connector (-40 +120 °C). 44
25290 Kimo KSI-50                - NTC immersion temperature probe, stainless steel probe length 50mm, diameter 6mm. Output on PVC cable length 2m, with mini-Din connector (-40 +120 °C). 43
25279 Kimo LS-CFR3-N  - Additional KILOG CFR license including 1 cable + 1 license for same PC. 255
25278 Kimo KIC13-CFR-N  - Configuration and dataprocessing software, as per CFR 21 part 11 norm. Supplied with I-KIC1 interface (KT 20) and CK-50 USB cable (not compatible with Class 120). 2050
25277 Kimo KIC3-CFR-N  - Configuration and dataprocessing software, as per CFR 21 part 11 norm. Supplied with CK-50 USB cable .For KISTOCK (except KT20 and Class 120). 1912
25276 Kimo CN-320                - Micro USB adaptor cable male / female, length 10cm. For connection of data recorder to Class 50/220/320 KISTOCK. Coming in standard with KNT-320 data recorder). 8
25275 Kimo KNT-320                - Data recorder for data downloading, 1-line display, IP65 protection housing, rechargeable battery via USB. Memory capacity: 20,000,000 measuring points. Supplied with micro USB adaptor cable --> female USB for connection to Class 50/220/320 KISTOCK. 317
25274 Kimo KIPID-600                - Smart ammeter clamp (0 to 600 A) with PVC cable length 2m and mini-Din connector. 434
25273 Kimo KIPID-200                - Smart ammeter clamp (0 to 200 A) with PVC cable length 2m and mini-Din connector. 305
25272 Kimo KIPID-100                - Smart ammeter clamp (0 to 100 A) with PVC cable length 2m and mini-Din connector. 292
25271 Kimo KIPID-50                - Smart ammeter clamp (0 to 50 A) with PVC cable length 2m and mini-Din connector. 279
25270 Kimo KICI              - Impulse smart probe made of PVC, length 2m and mini-Din connector. 64
25269 Kimo KICC              - Current input smart probe (range 0 to 20 mA and 4 to 20 mA), with PVC cable length 2m and mini-Din connector. 71
25268 Kimo KICT              - Voltage input smart probe, range 0 to 10 V with PVC cable length 2m and mini-Din connector. 70
25267 Kimo KITHI-150                - Remote temperature/hygrometry smart probe (5 to 95 %RH and -40 to +180°C). Probe body made of STAINLESS STEEL length 150mm with stainless steel filter, silicone cable length 2m with mini-Din connector. 236
25266 Kimo KITHP-130                - Remote temperature/hygrometry smart probe (5 to 95 %RH and -20 to +70°C). Probe body made of ABS length 130mm with stainless steel filter, PVC cable length 2m with mini-Din connector. 215
25265 Kimo KITHA                - Ambient temperature/hygrometry smart probe (5 to 95 %RH and -20 to +70°C). Probe body made of ABS length 95mm with connector with stainless steel filter. 146
25264 Kimo KICA-320 S+M - Supply and mounting of the KICA-320 adapter on a PT 100 3-wire temperature probe, including a terminal block and a male Mini-Din connector for KISTOCK KT 320 and KT TrackLog. (Should be ordered together with the probe). 88
25263 Kimo KITBI3-100-E                - Pt 100 temperature corkscrew penetration smart probe, Class A, IP68 protection. Stainless steel threaded probe length 100mm, diameter 8mm and T-shape stainless steel handle. Output on Teflon cable length 1m with mini-Din connector (-50 +250 °C). 168
25262 Kimo KITI3-100-E                - Pt 100 temperature penetration smart probe, Class A, IP68 protection. Stainless steel probe length 100mm, diameter 3mm with sharp tip and T-shape stainless steel handle. Output on Teflon cable length 1m with mini-Din connector (-50 +250 °C). 147
25261 Kimo KIPI3-150-E                - Pt100 smart penetration probe, Class A, IP 68 protection, stainless steel probe length 150 mm, diameter 3mm with sharp tip, with stainless steel handle diameter 10mm. Output on Teflon cable length 1m with mini-Din connector (-50 +250 °C). 112
25260 Kimo KIRPA-150                - Pt100 smart penetration probe, class A, IP65 protection. Stainless steel probe length 150mm, diameter 6mm with sharp tip. Output on Teflon cable length 2m with mini-Din connector (-50 +250 °C). 87
25259 Kimo KIRAM-150                - Pt100 smart ambient probe, class A, IP65 protection. Stainless steel probe length 150mm, diameter 6mm. Output on PVC cable length 2m with mini-Din connector (-40 +120 °C). 62
25258 Kimo KIRGA-150                - Pt100 smart immersion probe, class A, IP65 protection. Stainless steel probe length 150mm, diameter 6mm. Output on PVC cable length 2m with mini-Din connector (-40 +120 °C). 64
25257 Kimo KIRGA-50                - Pt100 smart immersion probe, class A, IP65 protection. Stainless steel probe length 50mm, diameter 6mm. Output on PVC cable length 2m with mini-Din connector (-40 +120 °C). 64
25256 Kimo KRB-320                - Wire extension for Class 320 KISTOCK, 5-m cable, with mini-Din male and female connectors (25 meters maximum total length). 49
25255 Kimo KAV-320                - KAV-320 anti-theft mouting plate. With or without anti-theft function. Supplied with padlock. Coming in standard with any Class 320 Kistock. 20
25253 Kimo KCC-320 - Temperature/hygrometry/atmospheric pressure/CO2 datalogger, with internal sensor (-20 +70 °C, 5 to 95 %RH, 800 to 1100 hPa and 0 to 5,000ppm), 2-line display, IP40 protection housing with magnet fixing and anti-theft wall-mounting support. Bluetooth communication for mobile and tablets applications (Androïd and Ios). Memory capacity: 2,000,000 measuring points.  617
25252 Kimo KPA-320  - Temperature/hygrometry/atmospheric pressure datalogger, with internal sensor (-20 +70 °C, 5 to 95 %RH and 800 to 1100 hPa), 2-line display, IP40 protection housing with magnet fixing and anti-theft wall-mounting support. Bluetooth communication for mobile and tablets applications (Androïd and Ios). Memory capacity: 2,000,000 measuring points. 376
25251 Kimo KP-321 - KP-320 differential pressure datalogger, with internal sensor (+/- 10,000 Pa), 2-line display, IP65 protection housing, with magnet fixing and anti-theft wall-mounting support. Bluetooth communication for mobile and tablets applications (Androïd and Ios). Memory capacity: 2,000,000 measuring points. 377
25250 Kimo KP-320  - KP-320 differential pressure datalogger, with internal sensor (+/- 1000 Pa), 2-line display, IP65 protection housing, with magnet fixing and anti-theft wall-mounting support. Bluetooth communication for mobile and tablets applications (Androïd and Ios). Memory capacity: 2,000,000 measuring points. 402
25249 Kimo KTT-320 - Temperature datalogger with 4 Thermocouple K inputs (-200 to 1300°C), J (-100 to 750°C), T (-200 to 400°C), N (-200 to +1300°C) and S (0 to 1760°C), with 2-line display, IP54 protection housing with magnet fixing and anti-theft wall-mountig support. Bluetooth communication for mobile and tablets applications (Androïd and Ios). Memory capacity:  2,000,000 measuring points. 444
25248 Kimo KT-320  - Temperature datalogger, with internal sensor (-40 +70 °C), 2-line display, IP65 protection housing with magnet fixing and anti-theft wall-mount support, 2 external inputs for temperrature / hygrometry / current / voltage / impulse probe. Bluetooth communication for mobile and tablets applications (Androïd and Ios). Memory capacity: 2,000,000 measuring points. 291
25247 Kimo KTHA                - Temperature/hygrometry interchangeable ambient probe (5 to 95 %RH and -20 to +70°C). Probe body made of ABS, length 65mm, with mini-Din connector and stainless steel filter for Class 220 KISTOCK. 135
25245 Kimo KSA-150                - NTC ambient temperature probe, perforated stainless steel probe length 150mm, diameter 6mm. Output on PVC cable length 2M, with mini-Din connector (-40 +120 °C). 45
25244 Kimo KIC3-N  - Configuration and dataprocessing software (KILOG 2015). Supplied with CK-50 USB cable for KISTOCK (except KT-20 and Class 120) 115
25244 Kimo KIC3-N  - KIC3-N configuration and dataprocessing software (KILOG 2015). Supplied with CK-50 USB cable for KISTOCK (except KT-20 and Class 120). 115
25244 Kimo KIC3-N  - Configuration and dataprocessing software (KILOG 2015). Supplied with CK-50 USB cable for KISTOCK (except KT-20 and Class 120). 115
25242 Kimo KRB-220                - Wire extension for Class 220 KISTOCK, 5-m cable, with mini-Din male and female connectors (25 meters maximum total length) 49
25241 Kimo KAV-220                - Anti-theft mounting plate for Class 220 KISTOCK. With or without anti-theft function. Supplied with padlock. 18
25240 Kimo KBL-AA                - KBL-AA battery, AA Lithium 3.6 V. For KISTOCK Class 150, 220, 320 (2 batteries required on Class 320). 10
25240 Kimo KBL-AA                - KBL-AA battery, AA Lithium 3.6 V. For KISTOCK Class 150, 220, 320 (2 batteries required on Class 320) 10
25239 Kimo KH-220-N - Temperature/hygrometry/light datalogger. With internal sensor (-20 +70 °C, 5 to 95 %RH, 0 to 10000 lux), IP20 protection housing with magnet fixing, 1 external input for temperature / hygrometry / current / voltage / impulse and water pressure probe. Memory capacity: 1,000,000 measuring points 292
25238 Kimo KH-220-O  - Temperature/hygrometry/light datalogger. With internal sensor (-20 +70 °C, 5 to 95 %RH, 0 to 10000 lux), 2-line display, IP20 protection housing with magnet fixing, 1 external input for temperature / hygrometry / current / voltage / impulse and water pressure probe. Memory capacity: 1,000,000 measuring points 318
25237 Kimo KTT-220-N  - Temperature datalogger with 2 Thermocouple K inputs (-200 to 1300°C), J (-100 to 750°C), T (-200 to 400°C), N (-200 to +1300°C) and S (0 to 1760°C), IP54 protection housing with magnet fixing. Memory capacity: 1,000,000 measuring points. 203
25236 Kimo KTT-220-O  - Temperature datalogger with 2 Thermocouple K inputs (-200 to 1300°C), J (-100 to 750°C), T (-200 to 400°C), N (-200 to +1300°C) and S (0 to 1760°C), 2-line display, IP54 protection housing, with magnet fixing. Memory capacity: 1,000,000 measuring points. 229
25235 Kimo KT-220-N - Temperature datalogger with internal sensor (-40 +70 °C), IP65 protection housing, magnet fixing, 1 external input for temperature/hygrometry/current/voltage/impulse and water pressure probe. Memory capacity: 1,000,000 measuring points. 165
25234 Kimo KT-220-O  - Temperature datalogger with internal sensor (-40 +70 °C), 2-line display, IP65 protection housing with magnet fixing, 1 external input for temperature/hygrometry/current/voltage/impulse and water pressure probe. Memory capacity: 1,000,000 measuring points. 191
25233 Kimo KILOG-3-N  - Configuration and dataprocessing SOLE software (KILOG 2015). Compatible with all KISTOCK models. 77
25233 Kimo KILOG-3-N  - Configuration and dataprocessing SOLE software (KILOG 2015). Compatible with all KISTOCK models. 77
25232 Kimo KBL-2450 - KBL-2450 battery (CR2450) for Class 120 KISTOCK 4
25231 Kimo KH-120 - Temperature/hygrometry datalogger with internal sensor (-20 +70 °C, 5 to 95% RH), 1-line display, IP40 protection housing with magnet fixing. Built-in USB connector, integrated function for automatic report printing and for configuration via PDF. Memory capacity: 50,000 measuring points. Compatible with KILOG 2015 dataprocessing software, coming in OPTION) 173
25230 Kimo KT-120 - Temperature datalogger with internal sensor (-40 +70 °C), 1-line display, IP65 protection housing with magnet fixing. Built-in USB connector, integrated function for automatic report printing and for configuration via PDF. Memory capacity: 50,000 measuring points. As per EN12830 norm. Compatible with KILOG 2015 dataprocessing software, coming in OPTION) 126
25229 Kimo KIC13-N  - Configuration and dataprocessing software (KILOG 2015). Supplied with I-KIC1 interface (KT 20) and CK-50 USB cable (except Class 120) 179
25229 Kimo KIC13-N  - Configuration and dataprocessing software (KILOG 2015). Supplied with I-KIC1 interface (KT 20) and CK-50 USB cable (Except KISTOCK 120). 179
25222 Kimo STA-13 S+M - STA-13 S+M 121
25111 Kimo SCRK-150 - SCRK-150 Thermocouple K contact probe: contact for small space. Measuring range from -20 to +150°C. Spring-wired contact tip. Stainless steel probe Ø 7 mm, length 150 mm, with handle, retractable cable, miniature male compensated connector (Tr 99% : 5 sec) 96
25106 Kimo RTR-3500     - RTR-3500 telescopic tripod with casters, for wireless measuring probes. Length from 1.20 to 3.50 m, can be bent at 90°, supplied with soft case. 503
25103 Kimo SFC-300-S - Hotwire probe dedicated to laboratory fume hoods. Stainless steel body Ø 8 mm, length 300 mm (0.15 to 5 m/s and 0 to +50°C). SMART-2014 recognition system. Supplied with calibration certificate (tolerance : +/- 0.02 m/s +/- 5% of the value reading). For VT 210 / MP 210 and AMI 310. Meeting with EN 14175-3 norm. 575
24955 Kimo RTE-2   - Telescopic extension, length 2m, tilting at 90°C. For wireless measuring probes. 275
24955 Kimo RTE-2   - Telescopic extension, length 2m, tilting at 90°C. For wireless measuring probes. 275
24949 Kimo P2-50 - Pack of 2 batteries for Class 50 KISTOCK 10
24943 Kimo CE-THE-2 S+M - CE-THE-2 S+M 110
24943 Kimo CE-THE-2 S+M - CE-THE-2 S+M 110
24938 Kimo RTCKM-500 - Thermocouple K, Class 1, , armoured PVC extension cable. Length 5m. For Pitot tubes, with miniature male/male compensated connectors / Temperature: 0 to 100°C. 27
24937 Kimo RTCKM-300 - Thermocouple K, Class 1, , armoured PVC extension cable. Length 3m. For Pitot tubes, with miniature male/male compensated connectors / Temperature: 0 to 100°C. 25
24936 Kimo RTCKM-150 - Thermocouple K, Class 1, , armoured PVC extension cable. Length 1.50m. For Pitot tubes, with miniature male/male compensated connectors / Temperature: 0 to 100°C. 23
24935 Kimo AMI 310 SK - Multi-function portable instrument, with colour backlit display, with 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), 2 Thermocouple K, J, T, S input channels (-200 +1760)C), output for PC and printer. Supplied with pressure module (-500 + 500Pa and 2 to 28 m/s), telescopic hotwire probe, gooseneck-shape. length 1m, with graduation (0.15 to 30 m/s), Pitot tube length 300mm, diameter 6mm, 2 x 1 m of silicone tube (black and white), stainless steel tube Ø 6 mm length 100mm, 2 cables with Mini-Din connector, for measuring probes, 2 lithium ion rechargeable batteries, with USB / mains adapter cable, micro-SD board for data storage, calibration certificate, and transport case. Coming in option: all measuring modules, all measuring and temperature probes (wire and wireless), software and printer. 2646
24934 Kimo SFC-900 GN - Telescopic hotwire probe gooseneck-shape. Length 1m, with graduation (0.15 to 30 m/s and 0 to +50°C). With handle, multi-function button, integrated Mini-Din connector, SMART-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 portable instruments. 635
24933 Kimo ATE-310 - ATE-310 694
24927 Kimo CAB 23 - CAB23, USB cable with main adaptor cable, for BAT rechargeable battery of Class 210 and 310. 15
24917 Kimo TCP 310-HP Alone - Adapter for high accuracy PT100 temperature probe, 4 wires, resolution 0.01 °C type TCP-310-HP. Output on Mini-Din connector for portable instruments TM210 and AMI310 of 2014. To be installed on already delivered probes ( should be ordered alone - without the probe). 70
24913 Kimo CK-50  - USB interface for the configuration and unloading of Kistock dataloggers class 50. USB Cable A Male to Micro USB B,  black length 1m 8
24912 Kimo KH-50  - Temperature and humidity datalogger with internal sensor (-20 to + 70 °C and 5 to 95% RH), with 1-line display, IP40 housing with magnet fixing. Memory capacity 16000 points. 133
24911 Kimo KT-50  - Temperature datalogger with internal sensor (-40 to + 70 °C) with 1-line display, IP65 housing with magnet fixing. Memory capacity 16000 points. Compliant with norm NF EN 12830 83
24908 Kimo TCP 310 M+S - Supply and mounting of the TCP-310 adapter on a 3 wires PT100 temperature probe, resolution 0,1 °C. Output on Mini-Din connector with a stainless steel junction pot for portable instruments class 210 & 310 of 2014. Factory mounting only. ( Should be ordered together with the probe). 60
24896 Kimo PRST      - Rod, adjustable from 100 to 300mm. For probes and telescopic extension. 41
24893 Kimo CPE311-S - CPE311-S 818
24872 Kimo VT 210 M - Multi-probe portable thermo-hygro-anemometer with backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions: air velocity, airflow, hygrometry and temperature. Supplied with air velocity/temperature/hygrometry telescopic multi-function probe, length 1m, with graduation, swivelling at +/- 90° (0.15 to 30 m/s, 0 to 50°C and 5 to 95% RH), 2 cables with Mini-Din connector, for measuring probes Lithium ion rechargeable battery, with USB / mains adapter cable, calibration certificate and transport case. Coming in option: probes for air velocity, hygrometry and temperature (wire or wireless) multi-function probes, tachometry, 4 TC channels and climatic conditions module, software and printer. 1431
24855 Kimo SCCK-150 - SCCK-150 Thermocouple K flat tip contact probe, with copper pellet for small spaces (-20 to +150°C). Ø 6 mm pellet, stainless steel probe Ø 4.5 mm, length 150 mm with handle, retractable cable, miniature male compensated connector (Tr 99% : 30 sec) 101
24853 Kimo SIP 500 HT - Immersion high temperature PT100 temperature probe, (-40 to +400 °C). Stainless steel probe Ø 6 mm, length 500mm with handle, retractable cable and connector for Class 60 (Tr 99% : 45 sec). 103
24850 Kimo CQ-IMP - Magnetic protective cover for remote printer of portable instruments (KIMP-23) 32
24849 Kimo BAT 23 - Lithium ion rechargeable batteries. For Class 210 and 310 instruments. 62
24848 Kimo KIMP-23 - Remote printer, infra-red connection, printing on thermal paper, with 10-year warranty. For Class 210 and 310 instruments. 319
24847 Kimo SPRP 300 C - PT100 immersion precision 4-wire numerical conversion temperature probe (-200 to +500°C), resolution 0.01°C. 1/3 DIN element. Accuracy from -40 to 200°C: +/-0,15% of the reading +/-0,15°C and on the rest of the range: +/-0,3% of the reading +/-0,25°C. Stainless steel probe Ø 4.5 mm, length 300 mm with handle, integrated mini-din connector, Smart-2014 recognition system. Supplied with COFRAC calibration certificate: 3 points -20°C, 0°C and 100°C. For TM210 and AMI310 instruments (Tr 99% : 35sec). 488
24846 Kimo SPRP 300 - PT100 immersion precision 4-wire numerical conversion temperature probe (-200 to +500°C), resolution 0.01°C. 1/3 DIN element. Accuracy from -40 to 200°C: +/-0,15% of the reading +/-0,15°C and on the rest of the range: +/-0,3% of the reading +/-0,25°C. Stainless steel probe Ø 4.5 mm, length 300 mm with handle, integrated mini-din connector, Smart-2014 recognition system. Supplied with calibration certificate: 3 points -20°C, 0°C and 100°C. For TM210 and AMI310 instruments (Tr 99% : 35sec). 275
24845 Kimo SIPS 500 HT - PT100 immersion high temperature probe (-40 to +450°C). Stainless steel probe Ø 6 mm, length 500mm, with handle, integrated mini-din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments (Tr 99%: 45 sec) 137
24842 Kimo SPPS 150 - PT100 penetration temperature probe (-40 to +250°C). Stainless steel probe Ø 4.5 mm, length 150mm, with handle, integrated mini-din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments (Tr 99%: 35 sec) 121
24841 Kimo SIPS 250 - PT100 immersion temperature probe (-40 to +250°C). Stainless steel probe Ø 4.5 mm, length 250 mm, with handle, integrated mini-din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 310 and 310 instruments (Tr 99% : 35 sec) 118
24840 Kimo SIPS 150 - PT100 immersion temperature probe (-40 to +250°C). Stainless steel probe Ø 4.5 mm, length 150 mm, with handle, integrated mini-din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 310 and 310 instruments (Tr 99% : 35 sec) 115
24839 Kimo SCPS 150 - PT100 flat tip temperature probe (-20 to +150°C). Pellet Ø 13 mm, stainless steel probe Ø 4.5 mm, length 150 mm, with handle, integrated mini-din connector, Smart-2014 recognition system. Supplied with adjustment for Class 210 and 310 instruments (Tr 99% : 115 sec) 174
24838 Kimo SAPS 150 - PT 100 ambient temperature probe (-40 to +250°C). Stainless steel perforated probe Ø 4.5 mm, length 150 mm, with handle, integrated mini-din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments (Tr 99% : 115 sec) 116
24837 Kimo CSM - Braid cable with mini-Din male connector. For measuring and PT100 temperature probes. For Class 210 and 310 instruments. 32
24836 Kimo RTCK-500  - Extension cable made of PVC, armoured, Thermocouple K, class 1. Length 5 m for temperature probe with miniature male/female compensated connector. Temperature : 0 to 100 °C. 29
24835 Kimo RTCK-300  - Extension cable made of PVC, armoured, Thermocouple K, class 1. Length 3 m for temperature probe with miniature male/female compensated connector. Temperature : 0 to 100 °C. 26
24834 Kimo RTCK-150  - Extension cable made of PVC, armoured, Thermocouple K, class 1. Length 1.50 m for temperature probe with miniature male/female compensated connector. Temperature : 0 to 100 °C. 25
24831 Kimo SIT 300 BT - Thermocouple S immersion probe, very Low temperature (-196 to + 50°). Stainless steel probe Ø 1.5 mm, length 300 mm with handle, retractable cable and miniature male compensated connector  (Tr 99% : 2 sec). 105
24830 Kimo SIS 1000  HT - Thermocouple S immersion probe, very high temperature (0 to + 1400°C). Ceramic probe Ø 8 mm, length 1000 mm with handle, straight cable and miniature male compensated connector. 694
24829 Kimo KIT-KSP  - Kit including galva plate (KSP) for compost probe. Fixing with anti-theft system support (KAV from Kistock range), or with magnet protective cover and mounting accessories. MOUNTING DONE BY THE USER (not at our factory) 68
24823 Kimo SPK 300  - Thermocouple K penetration probe (-40 to +250°C). Stainless steel probe Ø 4,5 mm with sharp tip, length 300 mm, with handle, retractable cab le and miniature male compensated connector (Tr 99% : 35 sec). 74
24820 Kimo SAK-10 - Thermocouple K wire probe, class 1, (-40 to +250°C). Visible welding, isolated PTFE cable length 10m, output on miniature male compensated connector. (Tr 99% : 3 sec) 39
24819 Kimo SAK-5 - Thermocouple K wire probe, class 1, (-40 to +250°C). Visible welding, isolated PTFE cable length 5m, output on miniature male compensated connector. (Tr 99% : 3 sec) 29
24818 Kimo SAK-2 - Thermocouple K wire probe, class 1, (-40 to +250°C). Visible welding, isolated PTFE cable length 2m, output on miniature male compensated connector. (Tr 99% : 3 sec) 23
24817 Kimo SAK-1 - Thermocouple K wire probe, class 1, (-40 to +250°C). Visible welding, isolated PTFE cable length 1m, output on miniature male compensated connector. (Tr 99% : 3 sec) 21
24816 Kimo SAK-05 - Thermocouple K wire probe, class 1, (-40 to +250°C). Visible welding, isolated PTFE cable length 0.5 m, output on miniature male compensated connector. (Tr 99% : 3 sec) 21
24810 Kimo TM 210  - TM210 multi-probe portable thermometer. With bakclit graphic display, 2 input channels for PT100 temperature probes (-200 to + 600°C), output for PC and printer. Supplied with 1 4-channel module Thermocouple K, J, T, S, N (-200 to + 1760°C), 1 cable with Mini-Din connector for measuring probes (coming in option). lithium ion rechargeable batteries, with USB / main adaptor cable, calibration certificate and transport case. In option: wire or wireless temperature probes, u-coefficient module, software and printer. 479
24809 Kimo MCU - Module for U-coefficient calculation, with 3 wire Thermocouple T probes, length 2m and 1 integrated ambient probe, Smart-2014 recognition system. Supplied with 3-point calibration certificate: 0, 20 and 40 °C. For wire probes, ambient probe of TM210, and Class 310 portable instruments 338
24809 Kimo MCU - Module for U-coefficient calculation, with 3 wire Thermocouple T probes, length 2m and 1 integrated ambient probe, Smart-2014 recognition system. Supplied with 3-point calibration certificate: 0, 20 and 40 °C. For wire probes, ambient probe of TM210, and Class 310 portable instrumentsinstruments. 338
24804 Kimo MP130W - Portable micromanometer for gas network leak test, with integrated pressure sensor. Measuring range ± 500 mbar. Resolution: from 0 to 20 mBar 0.01 mbar, from 20 to 500 mBar 0.1 mBar. Accuracy: from 0 to 20 mBar 0.4% of full scale +0.3 mBar and beyond 0.1% of full scale +0.6 mBar. Maximum pressure: 1 Bar. Pressure connector: rectus 21. Supplied with protection cover, soft case and adjustment certificate.  299
24798 Kimo SLU - Light probe (0 to 150 000 Lux). Output on cable with integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments. 490
24795 Kimo SIPF-150 - PT 100 wireless immersion temperature probe. Stainless steel probe Ø 4.5 mm, length 150 mm (-40 to +250°C). Wireless system, with handle and multi-function button. Supplied with adjustment certificate. For Class 210 and 310 instruments (Tr 99%: 115 sec). 128
24793 Kimo SAPF-150 - PT 100 wireless ambient temperature probe. Stainless steel perforated probe Ø 4.5 mm, length 150 mm (-40 to +250°C). Wireless system, with handle and multi-function button. Supplied with adjustment certificate. For Class 210 and 310 instruments (Tr 99%: 115 sec). 131
24792 Kimo SAD  - Transport back-pack. For Class 210/310 instruments and their accessories 109
24791 Kimo MTP-310  - ABS transport case for Class 210/310 instruments and their accessories. 173
24790 Kimo MTP-210  - Soft case for Class 210/310 instruments and their accessories. 45
24789 Kimo LPC-14 - Software for PC connection for Class 210/310 portable instruments. 273
24788 Kimo MCC - Climatic conditions module: hygrometry, temperature, atmospheric pressure (5 to 95%RH, 0 to +50°C, 800 to 1100 hPa). With Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments. 252
24787 Kimo M4TC - 4-channel module, Thermocouple K, J, T, S, N (-200 to +1760 °C). With Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments. 229
24786 Kimo MPR-2000-M  - Pressure module, with 1 thermocouple K/J/T channel (-2000 to +2000 mbar, -200 + 1300°C). With Smart-2014 recognition system. Supplied with 2x1m of clear tube, adjustment certificate. For Class 210 and 310 instruments. 382
24785 Kimo MPR-500-M  - Pressure module, with 1 thermocouple K/J/T channel (-500 to +500 mbar, -200 + 1300°C). With Smart-2014 recognition system. Supplied with 2x1m of clear tube, adjustment certificate. For Class 210 and 310 instruments. 382
24784 Kimo MPR-10000  - Pressure module, with 1 thermocouple K/J/T channel (-10000 to +10000 Pa, -200 +1300 °C). With Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments. 382
24783 Kimo MPR-2500  - Pressure module, with 1 thermocouple K/J/T channel (-2500 to +2500 Pa, -200 +1300 °C). With Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments. 512
24782 Kimo MPR-500 - Pressure module, with 1 thermocouple K/J/T channel (-500 to +500 Pa, -200 +1300 °C). With Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments. 642
24781 Kimo SHRF-300  - WIRELESS STAINLESS STEEL hygrometry probe, Ø 13 mm, length 300 mm (3 to 98% and -40 to +180°C). Wireless transmission system, with handle and multi-function button. Supplied with adjustment certificate. For Class 210 and 310 instruments. 656
24780 Kimo SHRF-110  - WIRELESS ABS hygrometry probe, Ø 13 mm, length 110 mm (3 to 98% and -20 to +80°C). Wireless transmission system, with handle and multi-function button. Supplied with adjustment certificate. For Class 210 and 310 instruments. 516
24779 Kimo SHF-100 - WIRELESS Ø 100 mm vane probe (0.3 to 35m/s and -20 to +80°C), Wireless transmission system, with handle and multi-function button. Supplied with adjustment certificate. For Class 210 and 310 instruments. 695
24778 Kimo SHF-70 - WIRELESS Ø 70 mm vane probe (0,4 to 35m/s and -20 to +80°C), Wireless transmission system, with handle and multi-function button. Supplied with adjustment certificate. For Class 210 and 310 instruments. 547
24777 Kimo SFG-300 - Gas leak detection probe (CH4, GPL, etc...), (0-10 000 ppm), flexible probe length 300mm. With handle, multi-function probe, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments. 208
24776 Kimo SCOH-112 - Multi-function probe for CO2-temperature-hygrometry (0 to 5000 ppm / - 20 to 80 °C / 5 to 95 %RH). With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments 765
24775 Kimo SCO-112  - Multi-function CO2-temperature probe (0 to 5000 ppm and -20 to 80°C). With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments. 532
24774 Kimo SCO-110  - Multi-function CO-temperature probe (0 to 500 ppm and -20 to 80°C). With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments. 505
24772 Kimo SMT-900  - Multi-function air velocity-temperature-hygrometry probe, telescopic, length 1m, with graduation, swivelling at 90° (0.15 to 30 m/s / 0 to 50 °C / 5 to 95 %RH). With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For VT210 and Class 310 instruments. 851
24771 Kimo STA - Optical and contact tachometry probe (60 to 60 000 RPM, 30 to 20 000 RPM and 4 to 2500 m/min) With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with 1m reflective tape, contact tip and adjustment certificate. For MP210 / VT210 / AMI310. 493
24770 Kimo SHR-300 - Stainless steel hygrometry probe, Ø 13 mm, length 300 mm (3 to 98 % and -40 to +180°C). With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments. 610
24769 Kimo SHR-110 - ABS Hygrometry probe, Ø 13 mm, length 110 mm (3 to 98 % and -20 to +80°C). With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments. 480
24768 Kimo SHT-100  - Ø 100 mm telescopic vane probe (0.3 to 35m/s and -20 to +80°C), length 1m, with graduation, swivelling at +/- 90°, With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 / 310 instruments. 868
24767 Kimo SH-100 - Ø 100 mm vane probe (0.3 to 35m/s and -20 to +80°C) . With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 instruments 642
24765 Kimo SHT-70 - Ø 70 mm telescopic vane probe (0.4 to 35m/s and -20 to +80°C), length 1m, with graduation, swivelling at +/- 90°, With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 / 310 instruments. 730
24764 Kimo SH-70 - Ø 70 mm vane probe (0.4 to 35m/s and -20 to +80°C), With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 / 310 instruments. 504
24763 Kimo SHT-14  - Ø 14 mm telescopic vane probe (0.8 to 25m/s and -20 to +80°C), length 1m, with graduation, swivelling at 90°. With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 / 310 instruments. 730
24762 Kimo SH-14  - Ø 14 mm vane probe (0.8 to 25m/s and -20 to +80°C), stainless steel body Ø 8mm, length 300mm. With  Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 / 310 instruments. 504
24761 Kimo SOM-900 - Omni-directional telescopic probe. Length 1m, with graduation, swivelling at 90° (0.00 to 5m/s, 0 to +50°C, 5 to 95%RH). Resolution 0.01 m/s on the whole measuring range. With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with transport case, tripod and adjustment certificate. For HQ210 and AMI310. 1199
24760 Kimo SFC-900  - Telescopic hotwire probe. Length 1m, with graduation, swivelling at 90° (0.15 to 30m/s and 0 to +50°C). With handle, multi-function button, integrated mini-Din connector, Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 portable instruments. 635
24759 Kimo SFC-300  - Hotwire probe. Stainless steel body, Ø 8 mm, length 300 mm  (0.15 to 30 m/s and 0 to +50°C). Smart-2014 recognition system. Supplied with adjustment certificate. For Class 210 and 310 portable instruments. 491
24758 Kimo AMI 310 PRF - Multi-function portable instrument, with colour backlit graphic display, with 2 input channels for measuring probes and PT100 temp. probes (-200 to +600°C), 2 Thermocouple K, J, T, S input channels (-200 +1760 °C), output for PC and printer. Supplied with pressure module (-500 + 500 Pa and 2 to 28 m/s), telescopic hotwire probe (0.15 to 30 m/s) length 1m, with graduation, swivelling at 90°, STAINLESS STEEL wireless hygrometry probe (3 to 98%RH -20 + 80°C), Ø 100 mm wireless vane probe (0.3 to 35 m/s), Pitot tube length 300mm diameter 6mm with integrated TCK, 2x1m silicone (black and white), stainless steel Ø 6 mm tube length 100mm, 2 cables with mini-Din connector, for measuring probes, 2 lithium ion rechargeable batteries, with USB / mains adapter cable, Micro-SD board for data storage, calibration certificate and transport case. Coming in option: all measuring modules, all measuring and temperature probes (wire and wireless),software,printer. 4248
24757 Kimo AMI 310 SRF - Multi-function portable instrument, with graphic backlit colour display, with 2 input channels for measuring probes and PT100 temp. probes (-200 to +600°C), 2 Thermocouple K, J, T, S input channels (-200 +1760 °C), output for PC and printer. Supplied with pressure module (-10 000 + 10 000 Pa and 4 to 100 m/s), hotwire probe (0.15 to 30 m/s), ABS wireless hygrometry probe (3 to 98%RH -20 + 80°C), Ø 100 mm wireless vane probe (0.3 to 35 m/s), Pitot tube length 300mm diameter 6mm, 2x1m silicone (black and white), stainless steel Ø 6 mm tube length 100mm, 2 cables with mini-Din connector, for measuring probes, 2 lithium ion rechargeable batteries, with USB/mains adapter cable, Micro-SD board for data storage, calibration certificate and transport case. Coming in option: all measuring modules, all measuring and temperature probes (wire and wireless),software,printer. 3502
24756 Kimo AMI 310 CRF - Multi-function portable instrument, with colour backlit graphic display, with 2 input channels for measuring probes and PT100 temp. probes (-200 to +600°C), 2 Thermocouple K, J, T, S input channels (-200 +1760 °C), output for PC and printer. Supplied with hotwire probe (0.15 to 30 m/s), ABS wireless hygrometry probe (3 to 98%RH -20 + 80°C), Ø 70 mm wireless vane probe (0.4 to 35 m/s), 2 cables with mini-Din connector, for measuring probes, 2 lithium ion rechargeable batteries, with USB / mains adapter cable, Micro-SD board for data storage, 2x1m of silicone tube 4x7, one stainless steel tube idam. 6mm length 100mm, calibration certificate and transport case. Coming in option: all measuring modules, all measuring and temperature probes (wire and wireless),software,printer. 2881
24755 Kimo AMI 310 PRO - Multi-function portable instrument, with colour backlit graphic display, with 2 input channels for measuring probes and PT100 temp. probes (-200 to +600°C), 2 Thermocouple K, J, T, S input channels (-200 +1760 °C), output for PC and printer. Supplied with pressure module (- 500 + 500 Pa and 2 to 28 m/s), telescopic hotwire probe, length 1m, with graduation, swivelling at 90° (0.15 to 30 m/s), STAINLESS STEEL hygrometry probe (3 to 98 %RH and -40 +180 °C), Ø 100 mm telescopic vane probe, length 1m, swivelling at +/- 90° (0.3 to 35 m/s), Pitot tube length 300 mm, Ø 6 mm with integrated TCK temperature probe, 2 x 1 m of silicone tube (black and white), stainless steel tube Ø 6mm length 100mm, 2 cables with mini-Din connector, for measuring probes, 2 lithium ion rechargeable batteries, with USB / mains adapter cable, Micro-SD board for data storage, calibration certificate and transport case. Coming in option: all measuring modules, all measuring and temperature probes (wire and wireless),software,printer. 4161
24754 Kimo AMI 310 STD - Multi-function portable instrument with colour backlit graphic display, with 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), 2 channels for Thermocouple K/J/T/S input (-200 +1760 °C), output for PC and printer. Supplied with pressure module (-10 000 + 10 000 Pa, 4 to 100 m/s), hotwire probe (0.15 to 30 m/s), ABS hygrometry probe (3 to 98% RH and -20 +80°C), Ø 100 mm vane probe (0.3 to 35 m/s), Pitot tube length 300mm, diameter 6mm, 2x1m silicone tube (black and white), stainless steel tube Ø 6mm length 100mm, 2 cables with Mini-Din connector for measuring probes (in option), 2 lithium ion rechargeable batteries, with USB / mains adapter cable, Micro SD board for data storage, calibration certificate and transport case. Coming in option: all measuring modules, all measuring probes, all temperature probes (wire or wireless), software and printer. 3416
24753 Kimo AMI 310 CLA - Multi-function portable instrument with colour backlit graphic display, with 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), 2 channels for Thermocouple K/J/T/S input (-200 +1760 °C), output for PC and printer. Supplied with hotwire probe (0.15 to 30 m/s), ABS hygrometry probe (3 to 98%RH and -20 +80°C), Ø 70 mm vane probe (0.4 to 35 m/s), 2 cables with Mini-Din connector for measuring probes (in option), 2 lithium ion rechargeable batteries, with USB / mains adapter cable, Micro SD board for data storage, 2x1m of silicone tube 4x7, one stainless steel tube diam. 6mm length 100mm, calibration certificate and transport case. Coming in option: all measuring modules, all measuring probes, all temperature probes (wire or wireless), software and printer. 2795
24752 Kimo AMI 310 - Multi-function portable instrument with colour backlit graphic display, with 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), 2 channels for Thermocouple K/J/T/S input (-200 +1760 °C), output for PC and printer. Supplied SOLE, with 2 cables with Mini-Din connector for measuring probes (in option), 2 lithium ion rechargeable batteries, with USB / mains adapter cable, Micro SD board for data storage, 2x1m of silicone tube 4x7, one stainless steel tube diam. 6mm length 100mm, adjustment certificate and transport case. Coming in option: all measuring modules, all measuring probes, all temperature probes (wire or wireless), software and printer. 1277
24750 Kimo HQ 210 O - Multi-probe portable thermo-hygrometer-air quality. With backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions : hygrometry, temperature, CO and CO2. Supplied with omni-directional SOM900 telescopic air velocity probe / °C / %RH (0.00 to 5 m/s, 5 to 95%RH and 0 + 50°C), 2 cables with Mini-Din connector for measuring probes, Lithium ion rechargeable battery with USB / mains adapter cable, calibration certificate and ABS transport case. Coming in option: hygrometry and temperature probes (wire or wireless), CO, omni-directional, light, climatic conditions module, 4 thermocouple channels, software and printer. 1502
24749 Kimo HQ 210 P  - Multi-probe portable thermo-hygrometer-air quality. With backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions : hygrometry, temperature, CO and CO2. Supplied with CO2/ Temperature / Hygrometry probe (0 to 5000 ppm, 3 to 98 %RH and -20 +80 °C), 2 cables with Mini-Din connector for measuring probes, Lithium ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: hygrometry and temperature probes (wire or wireless), CO, omni-directional, light, climatic conditions module, 4 thermocouple channels, software and printer. 999
24747 Kimo HQ 210 HT - Multi-probe portable thermo-hygrometer-air quality. With backlit graphic display, 2 input channels for measuring probe and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions: hygrometry, temperature, CO and CO2. Supplied with STAINLESS STEEL temperature/hygrometry probe (3 to 98% RH and -40 + 180°C) length 300mm, with 2 cables with mini-Din connector for measuring probe (coming in option), Lithium Ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: climatic conditions modules, hygrometry and temperature probes (wire or wireless), CO/CO2 probes, omni-directional probe, software. 884
24746 Kimo HQ 210 STD - Multi-probe portable thermo-hygrometer-air quality. With backlit graphic display, 2 input channels for measuring probe and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions: hygrometry, temperature, CO and CO2. Supplied with ABS temperature/hygrometry probe (3 to 98% RH and -20 + 80°C), with 2 cables with mini-Din connector for measuring probe (coming in option), Lithium Ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: climatic conditions modules, hygrometry and temperature probes (wire or wireless), CO/CO2 probes, omni-directional probe, software. 722
24745 Kimo HQ 210 - Multi-probe portable thermo-hygrometer-air quality. With backlit graphic display, 2 input channels for measuring probe and PT100 temperature probe (-200 to +600C), output for PC and printer. Functions: hygrometry, temperature, CO and CO2. Supplied SOLE, with 2 cables with mini-Din connector for measuring probe (coming in option), Lithium Ion rechargeable battery with USB / mains adapter cable, and transport case. Coming in option: climatic conditions modules, hygrometry and temperature probes (wire or wireless), CO/CO2 probes, omni-directional probe, software. 498
24744 Kimo VT 210 TL - Multi-probe portable thermo-hygro-anemometer with backlit graphic display, 2 input channels for measuring probes and PT100 temperature probe (-200 to +600°C), output for PC and printer. Functions: air velocity, airflow, hygrometry and temperature. Supplied with Ø 100 mm telescopic hotwire probe, length 1m, with graduation, swivelling at +/- 90° (0.3 to 35 m/s and -20 to +80°C), 2 cables with Mini-Din connector, for measuring probes Lithium ion rechargeable battery, with USB / mains adapter cable, calibration certificate and transport case. Coming in option: probes for air velocity, hygrometry and temperature (wire or wireless) multi-function probes, tachometry, 4 TC channels and climatic conditions module, software and printer. 1309
24743 Kimo VT 210 L - Multi-probe portable thermo-hygro-anemometer with backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions: air velocity, airflow, hygrometry and temperature. Supplied with Ø 100 mm vane probe (0.3 to 35 m/s and -20 to +80°C), 2 cables with Mini-Din connector for measuring probes (coming in option), Lithium ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: air velocity, hygrometry and temperature probes (wire and wireless), multi-function probes, tachometry, 4 TC-channel and climatic conditions module, software and printer. 1128
24742 Kimo VT 210 TH - Multi-probe portable thermo-hygro-anemometer with backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions: air velocity, airflow, hygrometry and temperature. Supplied with Ø 70 mm telescopic vane probe (0.4 to 35 m/s and -20 to +80°C), length 1m, with graduation, swivelling at +/- 90°, 2 cables with Mini-Din connector for measuring probes (coming in option), Lithium ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: air velocity, hygrometry and temperature probes (wire and wireless), multi-function probes, tachometry, 4 TC-channel and climatic conditions module, software and printer. 1150
24741 Kimo VT 210 H - Multi-probe portable thermo-hygro-anemometer with backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600 °C), output for PC and printer. Functions: air velocity, airflow, hygrometry and temperature. Supplied with Ø 70 mm vane probe (0.4 to 35 m/s and -20 to +80°C), 2 cables with Mini-Din connector for measuring probes (coming in option), Lithium ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: air velocity, hygrometry and temperature probes (wire and wireless), multi-function probes, tachometry, 4 TC-channel and climatic conditions module, software and printer. 969
24740 Kimo VT 210 TP - Multi-probe portable thermo-hygro-anemometer with backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions: air velocity, airflow, hygrometry and temperature. Supplied with Ø 14 mm telescopic vane probe, (0.8 to 25 m/s and -20 to +80°C), length 1m, with graduation, swivelling at 90°, 2 cables with Mini-Din connector for measuring probes (coming in option), Lithium ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: air velocity, hygrometry and temperature probes (wire and wireless), multi-function probes, tachometry, 4 TC-channel and climatic conditions module, software and printer. 1161
24739 Kimo VT 210 P - Multi-probe portable thermo-hygro-anemometer with backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions: air velocity, airflow, hygrometry and temperature. Supplied with Ø 14 mm vane probe, (0.8 to 25 m/s and -20 to +80°C), 1 hotwire extension, 1 cable with Mini-Din connector for measuring probes (coming in option), Lithium ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: air velocity, hygrometry and temperature probes (wire and wireless), multi-function probes, tachometry, 4 TC-channel and climatic conditions module, software and printer. 980
24738 Kimo VT 210 TF - Multi-probe portable thermo-hygro-anemometer, with backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions: air velocity, airflow, hygrometry, temperature. Supplied with telescopic hotwire probe, length 1m, with graduation, swivelling at 90° (0.15 to 30 m/s and 0 to +50°C)  2 cables with mini-Din connector for measuring probes (coming in option), Lithium Ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: probes for air velocity, hygrometry and temperature (wire or wireless), multi-function probe, tachometry, 4 thermocouple channel and climatic conditions module, software and printer. 1156
24737 Kimo VT 210 F - Multi-probe portable thermo-hygro-anemometer, with backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to + 600°C), output for PC and printer. Functions: air velocity, airflow, hygrometry, temperature. Supplied with hotwire probe (0.15 to 30 m/s and 0 to +50°C), 1 hotwire extension, 1 cable with mini-Din connector for measuring probes (coming in option), Lithium Ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: probes for air velocity, hygrometry and temperature (wire or wireless), multi-function probe, tachometry, 4 thermocouple channel and climatic conditions module, software and printer. 966
24736 Kimo VT 210 - Multi-probe portable thermo-hygro-anemometer, with backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600 °C), output for PC and printer. Functions: air velocity, airflow, hygrometry, temperature. Supplied SOLE with 2 cables with mini-Din connector for measuring probes (coming in option), Lithium Ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: probes for air velocity, hygrometry and temperature (wire or wireless), multi-function probe, tachometry, 4-thermocouple-channel and climatic conditions module, software and printer. 498
24735 Kimo MP 210 HP - Multi-probe portable thermo-anemo-manometer. With backlit graphic display, 2 input channels for measuring probes and PT100 (-200 +600 °C) temperature probes, output for PC and printer. Functions: pressure, temperature, air velocity and airflow. Supplied with pressure module (-2000 to 2000 mbar / 18 to 100 m/s) with 1 Thermocouple K/J/T/S/N channel, with 1 cable with mini-DIN connector, for measuring probes (coming in option), Lithium Ion rechargeable battery with USB / mains adapter cable, 2x1m of clear tube 4x6, 2x1m of silicone tube 4x7, one staineless steel tube diam. 6mm length 100mm, calibration certificate and transport case. Coming in option: pressure modules, 4 thermocouple channels, air velocity and temperature probes (wire or wireless), CO, gas leak, tachometry, software and printer. 890
24734 Kimo MP 210 H  - Multi-probe portable thermo-anemo-manometer. With backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions: pressure, temperature, air velocity and airflow. Supplied with pressure module (-500 to 500 mbar / 9 to 100 m/s), with 1 Thermocouple K/J/T/S/N channel, with 1 cable with mini-DIN connector, for measuring probes (coming in option), 2x1m silicone tube 4x6, 2x1m of silicone tube 4x7, stainless steel tube Ø 6 mm, length 100mm, Lithium Ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: pressure modules, 4 thermocouple channels, air velocity and temperature probes (wire or wireless), CO, gas leak, tachometry, software and printer. 890
24733 Kimo MP 210 G  - Multi-probe portable thermo-anemo-manometer. With backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Measuring range in air velocity: 4 to 85 m/s. Functions: pressure, temperature, air velocity and airflow. Supplied with pressure module (-10000 to 10000 Pa / 4 to 100 m/s), with 1 Thermocouple K/J/T/S/N channel, with 1 cable with mini-DIN connector, for measuring probes (coming in option), 2 x 1m silicone tube (black and white), stainless steel tube Ø 6 mm, length 100mm, Lithium Ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: pressure modules, 4 thermocouple channels, air velocity and temperature probes (wire or wireless), CO, gas leak, tachometry, software and printer. 890
24732 Kimo MP 210 M      - Multi-probe portable thermo-anemo-manometer. With backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions: pressure, temperature, air velocity and airflow. Supplied with pressure module (-2500 to 2500 Pa / 2 to 60 m/s), with 1 Thermocouple K/J/T/S/N channel, with 1 cable with mini-DIN connector, for measuring probes (coming in option), 2 x 1m silicone tube (black and white), stainless steel tube Ø 6 mm, length 100mm, Lithium Ion rechargeable battery with USB / mains adapter cable, transport case and calibration certificate. Coming in option: pressure modules, 4 thermocouple channels, air velocity and temperature probes (wire or wireless), CO, gas leak, tachometry, software and printer. 1020
24731 Kimo MP 210 P   - Multi-probe portable thermo-anemo-manometer. With backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions: pressure, temperature, air velocity and airflow. Supplied with pressure module (-500 to 500 Pa / 2 to 28 m/s), with 1 Thermocouple K/J/T/S/N channel, with 1 cable with mini-DIN connector, for measuring probes (coming in option), 2 x 1m silicone tube (black and white), stainless steel tube Ø 6 mm, length 100mm, Lithium Ion rechargeable battery with USB / mains adapter cable, calibration certificate and transport case. Coming in option: pressure modules, 4 thermocouple channels, air velocity and temperature probes (wire or wireless), CO, gas leak, tachometry, software and printer. 1121
24730 Kimo MP 210       - Multi-probe portable thermo-anemo-manometer. With backlit graphic display, 2 input channels for measuring probes and PT100 temperature probes (-200 to +600°C), output for PC and printer. Functions: pressure, temperature, air velocity and airflow. Supplied SOLE, with 1 cable with mini-DIN connector, for measuring probes (coming in option), Lithium Ion rechargeable battery with USB / mains adapter cable, 2x1m of silicone tube 4x7, one stainless steel tube diam. 6mm length 100mm, transport case. Coming in option: pressure modules, 4 thermocouple channels, air velocity and temperature probes (wire or wireless), CO, gas leak, tachometry, software and printer. 498
24727 Kimo AQ 110 S - Portable CO2-Meter with CO2 / Temperature remote probe, 2m cable (0 to 5000 ppm and 0 + 50°C). 2-line display. Functions: Hold,  Min, Max, backlight, change of unit and configurable automatic switch-off. Supplied with soft case and adjustment certificate. 568
24726 Kimo LV 110 S - Portable thermo-anemometer with remote Ø 100 mm vane probe, 2m cable (0.3 to 35 m/s and 0 to +50°C). 2-line dislay. Functions: air velocity, airflow, airflow with cone (only with K25, K85 models), temperature, automatic average, detection of airflow direction, Hold, Min, Max, backlight, change of unit and configurable automatic switch-off. Supplied with soft case and adjustment certificate. 525
24725 Kimo LV 117 S - Portable thermo-anemometer with remote Ø 70 mm vane probe, 2m cable (0.4 to 35 m/s and 0 to +50°C). 2-line display. Functions: air velocity, airflow, temperature, automatic average, detection of airflow direction, Hold, Min, Max, backlight, change of unit and configurable automatic switch-off. Supplied with soft case and adjustment certificate.  491
24724 Kimo LV 111 S     - Portable thermo-anemometer with remote Ø 14 mm vane probe, 2m cable (0.8 to 25 m/s and 0 to +50°C). 2-line display. Functions: air velocity, airflow in duct, airflow with cones. temperature, automatic average, Hold, Min, Max, backlight, change of unit and configurable automatic switch-off. Supplied with soft case and adjustment certificate. 525
24723 Kimo VT 115 S    - Portable telescopic hotwire thermo-anemometer, stainless steel remote probe Ø 8 mm, length 1 m, telescopic, graduate, bent at 90°, cable length 2 m, (0.15 to 30 m/s and 0 to +50°C). 2-line display. Functions: air velocity, airflow in duct, airflow with cone, temperature, automatic average, Hold, Min, Max, backlight, change of unit, configurable automatic switch-off. Supplied with soft case and adjustment certificate.  647
24722 Kimo MP 120 S - Portable anemo-manometer with integrated pressure sensor (0 to ± 1000 Pa and 2 to 40 m/s). 2-line display. Functions: pressure, air velocity with Pitot tube, configuration of the coefficient of the differential probe, temperature compensation, manual atmospheric pressure, Hold, Min, Max, backlight, change of unit, configurable automatic switch-off and manual auto-zero. Supplied with 2 x 1 m of silicone black and white tube, stainless steel tube Ø 6 mm, length 100 mm. Supplied with soft case and adjustment certificate. 454
24721 Kimo MP 112 S     - Portable micromanometer with integrated pressure sensor (0 to ± 2000 mbar). 2-line display. Functions: pressure, Hold, Min, Max, backlight, change of unit, configurable automatic switch-off, manual auto-zero. Supplied with secured pressure connections, 2 x 1 m of clear tube 4x6, with soft case and adjustment certificate. 268
24720 Kimo MP 115 S      - Portable micromanometer with integrated pressure sensor (0 to ± 500 mbar). 2-line display. Functions: pressure, Hold, Min, Max, backlight, change of unit, configurable automatic switch-off, manual auto-zero. Supplied with secured pressure connections, 2 x 1 m of clear tube 4x6, with soft case and adjustment certificate. 268
24719 Kimo CO 110 S - Portable CO-Meter with CO / Temperature remote probe, 2m cable (0 to 500 ppm and 0 + 50°C). 2-line display. Functions: CO Max, Hold,  Min, Max, backlight, change of unit and configurable automatic switch-off. Supplied with soft case and adjustment certificate. 317
24718 Kimo CT 110 S - Portable tachometer with optical and contact probe, 2m cable  (from 60 to 60 000 RPM and 30 to 3000 m/min). 2-line display. Functions: Hold, Min, Max, backlight, change of unit, configurable automatic switch-off. Supplied with 1 m reflective tape, soft case and adjustment certificate. 362
24717 Kimo LV 130 S     - Portable thermo-anemometer with built-in Ø 100 mm vane probe (0.3 to 35 m/s and 0 to +50°C). 2-line display. Functions: air velocity, airflow, airflow with cone (only with K25, K85 models), temperature, automatic average, detection of airflow direction, Hold, Min, Max, backlight, change of unit and configurable automatic switch-off. Supplied with soft case and adjustment certificate. 403
24716 Kimo SCLAIK - SCLAIK thermocouple K probe, magnet contact lamella (-40 to +250°C) Dimensions 27x32 mm, height 34 mm, straight cable length 1 m, miniature male compensated connector (Tr 99% : 5 sec) 336
24715 Kimo HD 110 S - Portable thermo-hygrometer with remote hygrometry/temperature probe, cable length 2 m, (5 to 95 %RH and -10 to +50°C). 2-line display. Functions: relative humidity, dew point, temperature, Hold Min, Max, backlight, change of unit, configurable automatic switch-off. Supplied in soft case with adjustment certificate. 339
24714 Kimo VT 110 S    - Portable hotwire thermo-anemometer, stainless steel remote probe Ø 8 mm, length 300 mm, cable length 2 m, (0.15 to 30 m/s and 0 to +50°C). 2-line dislay. Functions: air velocity, airflow in duct, airflow with cone, temperature, automatic average, Hold, Min, Max, backlight and configurable automatic switch-off. Supplied with soft case and adjustment certificate. 519
24713 Kimo MP 111 S  - Portable micromanometer with integrated pressure sensor (0 to ± 1000 mmH2O). 2-line display. Functions: pressure, Hold, Min, Max, backlight, change of unit, configurable automatic switch-off, manual auto-zero. Supplied with 2 x 1 m of black and white silicone tube, stainless steel tube diameter 6 mm length 100 mm, with soft case and adjustment certificate. 268
24712 Kimo MP 110 S     - Portable micromanometer with integrated pressure sensor (0 to ± 1000 Pa). 2-line display. Functions: pressure, Hold, Min, Max, backlight, change of unit, configurable automatic switch-off, manual auto-zero. Supplied with 2 x 1 m of black and white silicone tube, stainless steel tube diameter 6 mm length 100 mm, with soft case and adjustment certificate. 334
24710 Kimo GP 500-2 - GP 500-2 5034
24709 Kimo KI-AL-750-A - KI-AL-750-A 81
24700 Kimo TCP 110 S+M - Supply and mounting of the TCP-110 adapter on a 3 wires PT100 temperature probe. Output on Mini-Din connector with stainless steel junction pot for PT100 thermometers class 60 and class 110 of 2014. Factory mounting only. (Should be ordered together with the probe). 29
24695 Kimo KI-AL-600-C         - KI-AL-600-C         102
24682 Kimo KI-BF13-C - KI-BF13-C 32
24681 Kimo SCLK-HT - SCLK-HT Thermocouple K lamella contact probe, high temperature (-50 to +800°C). Lamella Ø 27 m, stainless steel probe Ø 20 mm, length 200mm with handle, straight cable length 1m and miniature male compensated connector (Tr 99% : 5 sec)  496
24660 Kimo SPP 150 - Penetration PT100 temperature probe, class A (-40 to +250°C). Stainless steel probe Ø 4.5 mm, length 150 mm with handle, retractable cable and connector for Class 60. (Tr 99% : 35 sec). 69
24659 Kimo SIP 250 - Immersion PT100 temperature probe (-40 to +250°C). Stainless steel probe Ø 4.5 mm, length 250 mm with handle, retractable cable and connector for Class 60. (Tr 99% : 35 sec). 65
24658 Kimo SIP 150 - Immersion PT100 temperature probe (-40 to +250°C). Stainless steel probe Ø 4.5 mm, length 150 mm with handle, retractable cable and connector for Class 60. (Tr 99% : 35 sec). 63
24657 Kimo SCP 150 - Flat tip contact PT100 temperature probe, class A (-20 to +150°C). Perforated stainless steel probe Ø 6 mm, length 150 mm with handle, retractable cable and connector for Class 60. (Tr 99% : 150 sec). 118
24656 Kimo SAP 150 - Ambient PT100 temperature probe, class A (-40 to +250°C). Perforated stainless steel probe Ø 4.5 mm, length 150 mm with handle, retractable cable and connector for Class 60. (Tr 99% : 115 sec). 64
24650 Kimo SPK 150  - Thermocouple K penetration probe, class 1 (-40 to +250°C). Stainless steel probe Ø 4.5mm, sharp tip, length 150mm, with handle, retractable cable, miniature male compensated connector. (Tr 99% : 30 sec). 67
24649 Kimo SCLCK-150 - Thermocouple K lamella contact probe, bent at 90°, class 1 (-40 to +250°C). Stainless steel probe Ø 6 mm, length 150mm, bent at 90°C on 50mm, with handle, retractable cable, miniature male compensated connector.  (Tr 99% :  5sec) 120
24648 Kimo SCLK-150   - Thermocouple K lamella contact probe, class 1 (-40 to +250°C). Stainless steel probe Ø 6 mm, length 150mm with handle, retractable cable, miniature male compensated connector.  (Tr 99% :  5sec) 95
24646 Kimo SAK-150  - Thermocouple K ambient probe, class 1 (-40 to +250°C). Stainless steel perforated probe Ø 4.5 mm, length 150mm with handle, retractable cable and miniature male compensated connector.  (Tr 99% : 50 sec) 68
24645 Kimo SIK 1000 HT - Thermocouple K immersion probe, class 1 (-40 to +1000°C). Inconel probe Ø 6 mm, length 1000mm with handle, retractable cable and miniature male compensated connector. (Tr 99% : 115 sec). 168
24644 Kimo SIK 500 HT - Thermocouple K immersion probe, class 1 (-40 to +1000°C). Inconel probe Ø 6 mm, length 500mm with handle, retractable cable and miniature male compensated connector. (Tr 99% : 115 sec). 86
24642 Kimo SIK 250  - Thermocouple K immersion probe, class 1 (-40 to +250°C). Stainless steel probe Ø 4.5 mm, length 250mm with handle, retractable cable and miniature male compensated connector. (Tr 99% : 35 sec). 68
24641 Kimo SIK 150  - Thermocouple K immersion probe, (-40 to +250°C). Stainless steel probe Ø 4.5 mm, length 150mm with handle, retractable cable and miniature male compensated connector. (Tr 99% : 35 sec). 55
24636 Kimo MT 51    - ABS transport case. For Class 50 and 110 instruments 74
24635 Kimo ST 110         - Soft case with handle. For Class 110 instruments (supplied with all Class 110 / can be ordered separately) 32
24634 Kimo ST 50    - Soft case for Class 50 instruments (supplied with all Class 50 / can be ordered separately) 21
24633 Kimo CQ 15 - Protective cover with integrated magnets. For Class 50 and 110 instruments. 40
24632 Kimo RTE    - Telescopic extension Ø 16 mm, length 1 m, can be bent at +/- 90°. For measuring probes with handle 210
24632 Kimo RTE      - Ø 16 mm telescopic extension, length 1m, swivelling at +/- 90°. For measuring probes with handle. 210
24631 Kimo DF 110 - Refrigerant gas and hydrogen leak detector. Detected gases: H2, CFC, HFC, HCFC, R134a and mixtures. Instrument meeting EN14624 norm. Manual and automatic auto-zero, flexible probe length 300mm, draft pump, heat-system sensor, visual and audible alarm, battery-level indicator. Supplied with test ampul containing refrigerant gas, filter, checking and conformity report (conformity to sensivity threshold of 5 g/year). soft case and user manual.  395
24630 Kimo FG 110    - Gas leak detector (CH4, LPG, etc...). Range 0-10 000 ppm. (hydrocarbon and CH4) and 0-1800 ppm (LPG). Flexible probe length 300mm, graphic backlight display, configurable visual and audible alarms, change of unit, Hold, Min-Max, configurable backlight and automatic switch-off. Supplied with soft case and checking report. 308
24629 Kimo CT 110 - Portable tachometer with optical and contact probe, 2m cable (from 60 to 60 000 RPM and 30 to 3000 m/min). 2-line display. Functions: Hold, Min, Max, backlight, change of unit, configurable automatic switch-off. Supplied with 1 m reflective tape, soft case and calibration certificate. 400
24628 Kimo AQ 110 - Portable CO2-Meter with CO2 / Temperature remote probe, 2m cable (0 to 5000 ppm and 0 + 50°C). 2-line display. Functions: Hold,  Min, Max, backlight, change of unit and configurable automatic switch-off. Supplied with soft case and calibration certificate. 617
24627 Kimo CO 110 - Portable CO-Meter with CO / Temperature remote probe, 2m cable (0 to 500 ppm and 0 + 50°C). 2-line display. Functions: CO Max, Hold,  Min, Max, backlight, change of unit and configurable automatic switch-off. Supplied with soft case and calibration certificate. 367
24626 Kimo LV 130     - Portable thermo-anemometer with built-in Ø 100 mm vane probe (0.3 to 35 m/s and 0 to +50°C). 2-line display. Functions: air velocity, airflow, airflow with cone (only with K25, K85 models), temperature, automatic average, detection of airflow direction, Hold, Min, Max, backlight, change of unit and configurable automatic switch-off. Supplied with soft case and calibration certificate. 504
24625 Kimo LV 110      - Portable thermo-anemometer with remote Ø 100 mm vane probe, 2m cable (0.3 to 35 m/s and 0 to +50°C). 2-line dislay. Functions: air velocity, airflow, airflow with cone (only with K25, K85 models), temperature, automatic average, detection of airflow direction, Hold, Min, Max, backlight, change of unit and configurable automatic switch-off. Supplied with soft case and calibration certificate. 627
24624 Kimo LV 117   - Portable thermo-anemometer with remote Ø 70 mm vane probe, 2m cable (0.4 to 35 m/s and 0 to +50°C). 2-line display. Functions: air velocity, airflow, temperature, automatic average, detection of airflow direction, Hold, Min, Max, backlight, change of unit and configurable automatic switch-off. Supplied with soft case and calibration certificate.  592
24623 Kimo LV 111     - Portable thermo-anemometer with remote Ø 14 mm vane probe, 2m cable (0.8 to 25 m/s and 0 to +50°C). 2-line display. Functions: air velocity, airflow in duct. temperature, automatic average, Hold, Min, Max, backlight, change of unit and configurable automatic switch-off. Supplied with soft case and calibration certificate. 627
24622 Kimo VT 115    - Portable telescopic hotwire thermo-anemometer, stainless steel remote probe Ø 8 mm, length 1 m, telescopic, graduate, bent at 90°, cable length 2 m, (0.15 to 30 m/s and 0 to +50°C). 2-line display. Functions: air velocity, airflow in duct, airflow with cones, temperature, automatic average, Hold, Min, Max, backlight, change of unit, configurable automatic switch-off. Supplied with soft case and calibration certificate.  748
24621 Kimo VT 110       - Portable hotwire thermo-anemometer, stainless steel remote probe Ø 8 mm, length 300 mm, cable length 2 m, (0.15 to 30 m/s and 0 to +50°C). 2-line dislay. Functions: air velocity, airflow in duct, airflow with cone, temperature, automatic average, Hold, Min, Max, backlight and configurable automatic switch-off. Supplied with soft case and calibration certificate. 621
24620 Kimo MP 120   - Portable anemo-manometer with integrated pressure sensor (0 to ± 1000 Pa and 2 to 40 m/s). 2-line display. Functions: pressure, air velocity with Pitot tube, configuration of the coefficient of the differential probe, temperature compensation, manual atmospheric pressure, Hold, Min, Max, backlight, change of unit, configurable automatic switch-off and manual auto-zero. Supplied with 2 x 1 m of silicone black and white tube, stainless steel tube Ø 6 mm length 100 mm, with soft case and calibration certificate. 554
24619 Kimo MP 130        - Portable micromanometer for gas network leak test, with integrated pressure sensor +/- 500 mBar. Resolution : from 0 to 20 mbar 0.01 mBar, from 20 to 500 mBar 0.1 mBar. Accuracy : from -20 to 20 mBar 0.4% of the full scale + 0.3mBar and beyond, 0.1% of the full scale +0.6 mBar. Maximum pressure : 1 Bar. Pressure connector : rectus 21. Supplied with kit including : rubber pump, tube; two 3-channel valves, quick coupler, connections for direct measurement on pipes and counters (bottle male 6-20, 10-32, 1/2G, M20x1,5), protective cover, with ABS transport case and adjustment certificate. 503
24618 Kimo MP 112     - Portable micromanometer with integrated pressure sensor (0 to ± 2000 mbar). 2-line display. Functions: pressure, Hold, Min, Max, backlight, change of unit, configurable automatic switch-off, manual auto-zero. Supplied with secured pressure connections, 2 x 1 m of clear tube 4x6, with soft case and calibration certificate. 370
24617 Kimo MP 115  - Portable micromanometer with integrated pressure sensor (0 to ± 500 mbar). 2-line display. Functions: pressure, Hold, Min, Max, backlight, change of unit, configurable automatic switch-off, manual auto-zero. Supplied with secured pressure connections, 2 x 1 m of clear tube 4x6, with soft case and calibration certificate. 370
24616 Kimo MP 111    - Portable micromanometer with integrated pressure sensor (0 to ± 1000 mmH2O). 2-line display. Functions: pressure, Hold, Min, Max, backlight, change of unit, configurable automatic switch-off, manual auto-zero. Supplied with 2 x 1 m of black and white silicone tube, stainless steel tube diameter 6 mm length 100 mm, with soft case and calibration certificate. 370
24615 Kimo MP 110     - Portable micromanometer with integrated pressure sensor (0 to ± 1000 Pa). 2-line display. Functions: pressure, Hold, Min, Max, backlight, change of unit, configurable automatic switch-off, manual auto-zero. Supplied with 2 x 1 m of black and white silicone tube, stainless steel tube diameter 6 mm length 100 mm, soft case and calibration certificate. 435
24614 Kimo HD 110 - Portable thermo-hygrometer with remote hygrometry/temperature probe, cable length 2 m, (5 to 95 %RH and -10 to +50°C). 2-line display. Functions: relative humidity, dew point, temperature, Hold Min, Max, backlight, change of unit, configurable automatic switch-off. Supplied in soft case with calibration certificate. 377
24613 Kimo LX 50 - Portable luxmeter, class C, with built-in sensor (0 to 10 000 lux). 1-line display. Functions: Hold, change of unit, automatic switch-off. Supplied with soft case and adjustment certificate. 283
24612 Kimo HM 50 - Portable pin moisture meter for materials: wood, concrete, plaster and brick. 1-line display. Functions: selection of material, Hold, change of unit, automatic switch-off. Supplied with interchangeable stainless steel pins, length 10 mm, set of spare pins, protection lid, soft case and adjustment certificate. 285
24611 Kimo CO 50 - Portable CO-meter with built-in CO/temperature probe (0 to 500 ppm and -20 + 80°C). 1-line display. Functions: CO, temperature, Hold, change of unit, automatic switch-off. Supplied with soft case and adjustment certificate. 283
24610 Kimo CT 50 - Portable tachometer with built-in contact and optical probe (from 60 to 60 000 RPM and 30 to 3000 m/min). 1-line display. Functions: Hold, change of unit, automatic switch-off. Supplied with soft case, 1m of reflective tape and adjustment certificate.  334
24609 Kimo HD 50   - Portable thermo-hygrometer with built-in temperature/hygrometry probe (5 to 95 %RH and -10 to +50°C). 1-line display. Functions: relative humidity, temperature, Hold, change of unit and automatic switch-off. Supplied with soft case and adjustment certificate. 311
24608 Kimo LV 50     - Portable vane probe thermo-anemometer,  with built-in Ø 100 mm vane probe (0.3 to 35 m/s and 0 to +50°C). 1-line display. Functions: air velocity, temperature, Hold, change of unit and automatic switch-off. Supplied with soft case and adjustment certificate. 355
24607 Kimo VT 50     - Portable hotwire thermo-anemometer with stainless steel remote probe, Ø 8 mm length 300 mm, 2 m cable (0.15 to 30 m/s and 0 to +50°C). 1-line display. Functions: air velocity, temperature, Hold, change of unit, automatic switch-off. Supplied with soft case and adjustment certificate. 355
24606 Kimo MP 55     - Portable micromanometer with integrated atmospheric pressure sensor (700 to 1100 mbar). 1-line display. Functions: Hold, change of unit and automatic switch-off. Supplied with soft case, 2 x 1 m of silicone black and white tube and adjustment certificate. 248
24605 Kimo MP 51  - Portable micromanometer portable with integrated pressure sensor (0 to ± 1000 mmH2O). 1-line display. Functions: pressure, Hold, auto-zero during switch-on, change of unit, automatic switch-off. Supplied with soft case, 2 x 1 m of silicone black and white tube and adjustment certificate. 248
24604 Kimo MP 50    - Portable micromanometer with integrated pressure sensor (0 to ± 1000 Pa). 1-line display. Functions: pressure, Hold, auto-zero during switch-on, change of unit, automatic switch-off. Supplied with soft case, 2 x 1 m of silicone black and white tube and adjustment certificate. 273
24601 Kimo STS-13 - STS-13 138
24485 Kimo GP 500-1 - GP 500-1 5034
24458 Kimo F-DFC - F-DFC set of 5 filters, PU20 white foam, for DFC / DFC100 / DF110 6
24457 Kimo C-DFC - C-DFC sensor for DFC / DFC 100 / DF110 detectors 64
24449 Kimo MVA S+M - MVA S+M 180
24443 Kimo CA310-H            - CA310-H            859
24442 Kimo CA310-B                - CA310-B                796
24441 Kimo BI-310            - BI-310            107
24440 Kimo CA-CPE      - CA-CPE      111
24439 Kimo CPE310-S             - CPE310-S             818
24438 Kimo HRP Factory Activation - HRP Factory Activation 74
24437 Kimo RS5 Factory Activation - RS5 Factory Activation 85
24436 Kimo CE-THE S+M - CE-THE S+M 110
24435 Kimo C4R S+M - C4R S+M 82
24434 Kimo O2S Factory Activation - O2S Factory Activation 92
24433 Kimo R310-10 - R310-10 100
24432 Kimo R310-5 - R310-5 76
24431 Kimo STD-13 - STD-13 203
24430 Kimo SCO2 - SCO2 500
24429 Kimo SCCO  - SCCO  318
24428 Kimo SVH-100 - SVH-100 305
24427 Kimo SVH-70 - SVH-70 300
24426 Kimo SVH-14 - SVH-14 389
24425 Kimo SVO - SVO 634
24424 Kimo SVS - SVS 294
24423 Kimo SHDI-300 - SHDI-300 250
24422 Kimo SHDI-150 - SHDI-150 245
24421 Kimo SHDP-300 - SHDP-300 219
24420 Kimo SHDP-150 - SHDP-150 209
24419 Kimo SHSI  - SHSI  177
24418 Kimo SPI2-ATMO S+M - SPI2-ATMO S+M 164
24417 Kimo SPI2-10000 S+M - SPI2-10000 S+M 181
24416 Kimo SPI2-1000 S+M - SPI2-1000 S+M 181
24415 Kimo SPI2-500 S+M - SPI2-500 S+M 181
24414 Kimo SPI2-100 S+M - SPI2-100 S+M 181
24413 Kimo C310-HN - C310-HN 536
24412 Kimo C310-HO - C310-HO 600
24411 Kimo C310-BN - C310-BN 504
24410 Kimo C310-BO - C310-BO 568
24285 Kimo TH110-ANES - TH110-ANES 250
24284 Kimo TH110-AOES - TH110-AOES 286
24283 Kimo TH110-PNES - TH110-PNES 250
24227 Kimo PF-110 - PF-110 20
24226 Kimo TM110-ANE - TM110-ANE 179
24225 Kimo TM110-AOE - TM110-AOE 210
24224 Kimo TM110-PNE - TM110-PNE 179
24223 Kimo TM110-POE - TM110-POE 210
24219 Kimo TM50-E - TM50-E 54
24218 Kimo TM50-S - TM50-S 40
24203 Kimo LR110-PO - LR110-PO 487
24202 Kimo CR110-AO - CR110-AO 522
24201 Kimo CR110-PO - CR110-PO 522
24106 Kimo LCC-S - LCC-S 273
24105 Kimo SQR/3 Factory Activation - SQR/3 Factory Activation 110
24105 Kimo SQR/3 Factory Activation - SQR/3 Factory Activation 110
24024 Kimo CO2ST-S - CO2ST-S 269
24022 Kimo COST-S - COST-S 187
24020 Kimo HST-S - HST-S 186
24019 Kimo HST-A - HST-A 194
24018 Kimo HST-D - HST-D 194
24017 Kimo TST-S - TST-S 146
24013 Kimo TST-B - TST-B 165
24012 Kimo PST-15 - PST-15 194
24011 Kimo PST-14 - PST-14 194
24010 Kimo PST-13 - PST-13 186
24009 Kimo PST-12 - PST-12 194
24008 Kimo PST-11 - PST-11 240
24006 Kimo LR110-PN - LR110-PN 448
24003 Kimo CP116-AN - CP116-AN 217
24002 Kimo CP116-AO - CP116-AO 311
24001 Kimo CP116-PN - CP116-PN 207
24000 Kimo CP116-PO - CP116-PO 301
23999 Kimo CO112-ANS - CO112-ANS 271
23998 Kimo CO112-ANA - CO112-ANA 280
23997 Kimo CO112-AOS - CO112-AOS 308
23995 Kimo CO110-ANS - CO110-ANS 224
23993 Kimo CO110-AOS - CO110-AOS 263
23991 Kimo CO110-PNS - CO110-PNS 224
23989 Kimo CO110-POS - CO110-POS 263
23987 Kimo HM110-ANS - HM110-ANS 160
23986 Kimo HM110-ANA - HM110-ANA 189
23985 Kimo HM110-AND - HM110-AND 189
23981 Kimo HM110-PNS - HM110-PNS 160
23980 Kimo HM110-PNA - HM110-PNA 189
23979 Kimo HM110-PND - HM110-PND 189
23963 Kimo TH110-ANS - TH110-ANS 228
23962 Kimo TH110-ANA - TH110-ANA 250
23961 Kimo TH110-AND - TH110-AND 250
23960 Kimo TH110-AOS - TH110-AOS 263
23959 Kimo TH110-AOA - TH110-AOA 286
23958 Kimo TH110-AOD - TH110-AOD 286
23957 Kimo TH110-PNS - TH110-PNS 228
23956 Kimo TH110-PNA - TH110-PNA 250
23955 Kimo TH110-PND - TH110-PND 250
23954 Kimo TH110-POS - TH110-POS 263
23953 Kimo TH110-POA - TH110-POA 286
23952 Kimo TH110-POD - TH110-POD 286
23951 Kimo TM110-ANS - TM110-ANS 125
23948 Kimo TM110-ANB - TM110-ANB 138
23947 Kimo TM110-AOS - TM110-AOS 151
23944 Kimo TM110-AOB - TM110-AOB 164
23943 Kimo TM110-PNS - TM110-PNS 125
23940 Kimo TM110-PNB - TM110-PNB 138
23939 Kimo TM110-POS - TM110-POS 151
23936 Kimo TM110-POB - TM110-POB 164
23935 Kimo CTV110-VNA300 - CTV110-VNA300 265
23934 Kimo CTV110-VNA150 - CTV110-VNA150 265
23933 Kimo CTV110-VND300 - CTV110-VND300 275
23932 Kimo CTV110-VND150 - CTV110-VND150 275
23931 Kimo CTV110-VOA300 - CTV110-VOA300 303
23930 Kimo CTV110-VOA150 - CTV110-VOA150 303
23929 Kimo CTV110-VOD300 - CTV110-VOD300 309
23928 Kimo CTV110-VOD150 - CTV110-VOD150 309
23927 Kimo CTV110-ANA300 - CTV110-ANA300 265
23926 Kimo CTV110-ANA150 - CTV110-ANA150 265
23925 Kimo CTV110-AND300 - CTV110-AND300 275
23924 Kimo CTV110-AND150 - CTV110-AND150 275
23923 Kimo CTV110-AOA300 - CTV110-AOA300 303
23922 Kimo CTV110-AOA150 - CTV110-AOA150 303
23921 Kimo CTV110-AOD300 - CTV110-AOD300 309
23920 Kimo CTV110-AOD150 - CTV110-AOD150 309
23919 Kimo CP115-AN - CP115-AN 217
23918 Kimo CP115-AO - CP115-AO 265
23917 Kimo CP115-PN - CP115-PN 207
23916 Kimo CP115-PO - CP115-PO 245
23915 Kimo CP114-AN - CP114-AN 217
23914 Kimo CP114-AO - CP114-AO 265
23913 Kimo CP114-PN - CP114-PN 207
23912 Kimo CP114-PO - CP114-PO 245
23911 Kimo CP113-AN - CP113-AN 217
23910 Kimo CP113-AO - CP113-AO 265
23909 Kimo CP113-PN - CP113-PN 207
23908 Kimo CP113-PO - CP113-PO 245
23907 Kimo CP112-AN - CP112-AN 217
23906 Kimo CP112-AO - CP112-AO 265
23905 Kimo CP112-PN - CP112-PN 207
23904 Kimo CP112-PO - CP112-PO 245
23903 Kimo CP111-AN - CP111-AN 276
23902 Kimo CP111-AO - CP111-AO 342
23667 Kimo EPH202                             - Protection tip  in PTFE and catalytic material type EPH202. Dedicated to the applications lab. Pharmaceutical or autoclave using of the H2O2 (Péroxyde of hydrogen)  to disinfect from 3 to 30 %. For probe of humidity diameter 13 mm, class 200 and 300. 198
23492 Kimo PI-1 - PI-1: 1 paper roll (10-year-warranty) for KIGAZ integrated printer, for remote printer KDIP/2 and KIMP-23. 10-year guarantee. 10
23491 Kimo 23491 - Set of 5 paper rolls type PI-5 for remote printers of Si-CAX30 (27546), KDIP/2, KIMP-23, Si-CA A-RTBP and the integrated printers of KIGAZ 2012 and 2015. 26
23491 Kimo PI-5 - PI-5: set of 5 paper rolls (10-year-warranty) for KIGAZ integrated printer, for remote printer KDIP/2 and KIMP-23. 10-year guarantee. 26
23401 Kimo R5-L2 - Extension cable length 5 m type R5-L2 for light meter LX 200 58
23370 Kimo VTP - Plastic transport case type VTP for pitot tube and probe with a maximum size of 110cm x 20cm x 4cm. 123
23362 Kimo KPID-600-BRF                - Ammeter clamp (0 to 600 A), with PVC cable length 2m and mini-DIN connector. 434
23361 Kimo KPID-200-BRF                - Ammeter clamp (0 to 200 A), with PVC cable length 2m and mini-DIN connector. 305
23360 Kimo KPID-100-BRF                - Ammeter clamp (0 to 100 A), with PVC cable length 2m and mini-DIN connector. 292
23359 Kimo KPID-50-BRF                - Ammeter clamp (0 to 50 A), with PVC cable length 2m and mini-DIN connector. 292
23358 Kimo KCTD-IB              - Impulse input cable (counting and TTL frequency), made of PVC, length 2m and mini-DIN connector. For Class 150/220 KISTOCK and wireless KISTOCK. 41
22653 Kimo KCCD-02-B              - Current input cable (0 to 20 mA and 4 to 20 mA) with PVC cable length 2m and mini-din connector. 55
22652 Kimo KCTD-10-B              - Voltage input cable, range 0 to 10 V with PVC cable length 2m and mini-din connector. 43
22586 Kimo AJ-K-N              - Adjusting code for KISTOCK. 414
22548 Kimo BN 70 - Black ball type : BN-70. Diam. 70 mm with connection gland for temperature probes diam. 2 to 7 mm. Supplied without probe. 172
22518 Kimo BPH-100 - Protective cap type BPH-100 for diameter 100 mm vane 11
22517 Kimo BPH-70 - Protective cap type BPH-70 for diameter 70 mm vane 8
22283 Kimo PH100 - PH100 - set of 2 additional pins HM100 S and HM50 moisture meter. 10
22226 Kimo SKCT       - Thermocouple K lamella contact probe, class 1, for duct with diameter from Ø 10 to 50 mm (-40 to +150°C), handle with spring, retractable cable, miniature male compensated connector.  (Tr 99% : 15 sec) 118
22225 Kimo H 150 - Soft cover type : H150. For airflow cone type K150. 128
22224 Kimo H 120 - Soft cover type : H120. For airflow cone type K120. 120
22223 Kimo H 85 - Soft cover type : H85. For airflow cone type K85. 96
21885 Kimo DG-V-250 - Stainless steel thermowell with fixing screw  Lg. 250mm 56
21791 Kimo LX 200 - LX200 digital light meter, Class B, as per NF C 42-710 norm (0 to 200,000 lux). Max - min Hold - Relative - Uniformity - Time evolution - Mapping. Supplied with data processing software, calibration certificate and transport case. 791
21789 Kimo K 85 - K.85 airflow cone for diameter 100mm vane probe. Size: 350 x 350 mm. Airflow: 10 to 400 m3/h, supply and exhaust. Supplied with soft cover. 412
21788 Kimo DG-F-200 - Stainless steel thermowell with 1/2 male BSP thread Lg. 200mm 56
21667 Kimo KIRAY 50 - KIRAY 50 infrared thermometer, laser sighting.Measuring range: -50 to +380 °C. D:S = 12:1. Backlit display, function Min/Max, emissivity 0.95. Supplied with transport cover and user manual. 92
21666 Kimo KIRAY 300 - KIRAY 300 infrared thermometer, double laser sighting. Measuring range: - 50 to + 1850 °C. D:S = 50:1. Backlit display, audible alarm (high and low), input for external Thermocouple K temperature probe, adjustable emissivity. Supplied with wire Thermocouple K temperature probe, telescopic tripod, transport case and user manual. 525
21664 Kimo KIRAY 100 - KIRAY 100 infrared thermometer, double laser sighting. Measuring range: -50 to +800 °C. D:S = 20:1. Backlit display, audible alarm (high and low), adjustable emissivity. Supplied with transport cover and user manual. 153
21631 Kimo KIRAY 200 - KIRAY 200 infrared thermometer, laser sighting. Measuring range: - 50 to + 800 °C. D:S = 30:1. Backlit display, audible alarm (high and low), input for external Thermocouple K temperature probe, adjustable emissivity. Supplied with wire Thermocouple K  temperature probe, transport cover and user manual. 179
21254 Kimo SFCSMK - Thermocouple K temperature probe for surface measurement on moving parts (0 to +400 °C). Contact element made of aluminium, on wheel, with handle, retractable cable, miniature male compensated connector (Tr 99% : 4 sec) 147
21212 Kimo DG-V-200 - Stainless steel thermowell with fixing screw  Lg. 200mm 54
20645 Kimo DG-V-100 - Stainless steel thermowell with fixing screw  Lg. 100mm 50
20468 Kimo SL-MB5 - External Li-ion battery type SL-MB5 with USB connection, 5-day life period, supplied with USB cable and AS-MB5 transformer for SL 100/200 solarimeter and LX 100 and LX 200 luxmeters 118
20468 Kimo SL-MB5 - Batterie Li-ion externe type SL-MB5 avec prise USB, autonomie 5 jours, livrée avec cordon USB et bloc secteur AS-MB5 pour solarimètre SL 100/200 et luxmètre LX 100 118
19349 Kimo AS-MB5 - Main adaptor (1000 mA) type AS-MB5 for SL-MB5 battery. 32
19349 Kimo AS-MB5 - Batterie Li-ion externe type SL-MB5 avec prise USB, autonomie 5 jours, livrée avec cordon USB et bloc secteur AS-MB5 pour solarimètre SL 100/200 et luxmètre LX 100 32
19347 Kimo PPCX - Tripod type for soundlevel meters, solarimeters and IKAM thermal camera. 77
19148 Kimo DG-V-150 - Stainless steel thermowell with fixing screw  Lg. 150mm 52
18999 Kimo R4-08 - 4m extension, model R4-08, for all temperature and measuring probes of 2008 portable range and solarimeters (maximum 2 extensions) - 65
18455 Kimo GST - Silicone heat-conductive grease coming in 200 g tube, ref: GST. 40
18423 Kimo CSM-K S+M - Supply and mounting of standard male thermocouple K connector, type CSM-K on temperature probe. Operating temperature : - 50 °C to + 210 °C. (Should be ordered together with the probe). 25
18401 Kimo BFP-13                              - Plastic mounting clamp with connection gland for probe Ø13 mm. 20
18401 Kimo BFP-13                              - BFP-13                              20
18209 Kimo CSF-K S+M - Supply and mounting of standard female thermocouple K connector, type CSF-K on temperature probe. Operating temperature : - 50 °C to + 210 °C. (Should be ordered together with the probe). 23
18082 Kimo DG-V-50 - Stainless steel thermowell with fixing screw  Lg. 50mm 48
18073 Kimo SCS  S+M - Supply and assembly of the SCS stainless steel cable clamp on standard male connector and thermocouple temperature probe. (Should be ordered together with the probe and the connector). 19
17957 Kimo SL 200 - SL 200 portable solarimeter - instantaneous power (1 to 1400 W/m2), energetic exposure (up to 500 KWh/m2) with 31-day memory (44,640 points). IP40 ABS housing, graphic display. Supplied with IP66 remote solar cell, 1,25m cable, software + interface, transport case and calibration certificate. 904
17757 Kimo DG-F-150 - Stainless steel thermowell with 1/2 male BSP thread Lg. 150mm 54
17709 Kimo DG-F-50 - Stainless steel thermowell with 1/2 male BSP thread Lg. 50mm 50
17246 Kimo CMF-K S+M - Supply and mounting of the miniature female thermocouple K connector, type CMF-K on temperature probe. Operating temperature : - 50 °C to + 210 °C. (Should be ordered together with the probe). 14
17223 Kimo SCM  S+M - Supply and mounting of the SCM stainless steel cable clamp on miniature male connector and thermocouple temperature probe. ( Should be ordered together with the probe and the connector). 19
17221 Kimo CMM-K S+M - Supply and mounting of the miniature male thermocouple K connector, type CMM-K on temperature probe. Operating temperature : - 50 °C to + 210 °C. ( Should be ordered together with the probe). 23
17163 Kimo SKP 2000  - Thermocouple K probe, class 1, ( -20 +150°C) stainless steel protective sheath Ø 16 x 2 mm, length 2000 mm with sharp tip, T-shape handle 2 x 150 mm, diameter 21.3 mm. Output on retractable cable length 1.80 m with miniature male compensated connector  (Tr 99% : 165 sec). 262
17161 Kimo SKP 1500  - Thermocouple K probe, class 1, ( -20 +150°C) stainless steel protective sheath Ø 16 x 2 mm, length 1500 mm with sharp tip, T-shape handle 2 x 150 mm, diameter 21,3 mm. Output on retractable cable length 1.80 m with miniature male compensated connector  (Tr 99% : 165 sec). 221
17160 Kimo SKP 1000  - Thermocouple K probe, class 1, ( -20 +150°C) stainless steel protective sheath Ø 16 x 2 mm, length 1000 mm with sharp tip. T-shape handle, 2 x 150 mm, diameter 21,3 mm. Output on retractable cable length 1.80 m with miniature male compensated connector  (Tr 99% : 165 sec). 202
17159 Kimo SKV 500  - Thermocouple K Velcro contact probe, class 1 (-20 to + 90°C). Fixing with Velcro for duct Ø 100mm maximum, with 5m cable, miniature male compensated connector.   (Tr 99% : 50 sec) 72
17157 Kimo SKV 300 - Thermocouple K Velcro contact probe, class 1 (-20 to + 90°C). Fixing with Velcro for duct Ø 100mm maximum, with 3m cable, miniature male compensated connector.   (Tr 99% : 50 sec) 63
17156 Kimo SKV 150 - Thermocouple K Velcro contact probe, class 1 (-20 to + 90°C). Fixing with Velcro for duct Ø 100mm maximum, with 1.50m cable, miniature male compensated connector.   (Tr 99% : 50 sec) 55
17155 Kimo SKA-110 - Thermocouple K ambient probe, class 1 (-40 to +80°C) Stainless steel perforated probe Ø 4,5 mm, length 110 mm, direct output on miniature male compensated connector, without handle and without cable. (Tr 99% : 50 sec) 55
17114 Kimo LX 100 - LX 100 digital light meter, Class C, as per NF C 42-710 norm (0 to 150 000 lux). Hold, min, max, average. Supplied with calibration certificate and soft case. 418
17113 Kimo SL 100 - SL 100 portable solarimeter - instantaneous power (1 to 1400 W/m2), energetic exposure (up to 100 KWh/m2). IP40 ABS housing, graphic display, measurement in continuous over 3 days. Supplied with IP66 remote solar cell, 1,25m cable, soft case and calibration certificate. 570
16583 Kimo FPS - FPS fixing kit for solar cell of solarimeters type SL100/200 and CR100 on solar panels. 69
16582 Kimo EFS - EFS angle mounting, for solar cell of solarimeters type SL100/200 and CR100. 26
16562 Kimo Debimo 600 - Debimo 600 126
16560 Kimo Debimo 300 - Debimo 300 89
15747 Kimo BF-13  - BF-13 stainless steel mounting clamp for hotwire probe diam.13mm 23
15747 Kimo BF-13  - BF-13  23
15646 Kimo KSH-85 - Saturated salted solution at 85% RH . Model KSH-85. Dedicated to check-up of humidity probes diam.13mm. 159
15646 Kimo KSH-85                                 - Saturated salt solution at 85% RH. Dedicated to check-up of diam.13 mm humidity probes 159
15645 Kimo KSH-44 - Saturated saled solution at 44% RH . Model KSH-44. Dedicated to check-up of humidity probes diam.13mm. 159
15645 Kimo KSH-44                               - Saturated salt solution at 44% RH. Dedicated to check-up of diam.13 mm humidity probes 159
15644 Kimo KSH-11 - Saturated salted solution at 11% RH . Model KSH-11. Dedicated to check-up of humidity probes diam.13mm. 159
15644 Kimo KSH-11                              - Saturated salt solution at 11% RH. Dedicated to check-up of diam.13 mm humidity probes 159
15634 Kimo DG-F-100 - Stainless steel thermowell with 1/2 male BSP thread Lg. 100mm 52
15532 Kimo BF-8 S+M - Supply and mounting of the stainless steel mounting flange BF-8, for the installation of 8 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 17
15531 Kimo BF-6 S+M - Supply and mounting of the stainless steel mounting flange BF-6, for the installation of 6 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 16
15530 Kimo BF-4 S+M - Supply and mounting of the stainless steel mounting flange BF-4, for the installation of 3 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 13
15284 Kimo RCT-14-12 S+M - Supply and mounting of the stainless steel bicone fitting RCT-14-12. With PTFE olive, 1/2 gas cylindrical thread, for fixed installation of 14 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 41
15283 Kimo RCI-14-12 S+M - Supply and mounting of the stainless steel bicone fitting RCI-14/12. With stainless steel olive, 1/2 gas cylindrical thread for fixed installation of 14 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 41
15281 Kimo RCI-12-12 S+M - Supply and mounting of the stainless steel bicone fitting RCI-12-12. With stainless steel olive, 1/2 gas cylindrical thread for fixed installation of 12 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 21
15279 Kimo RCI-8-12 S+M - Supply and mounting of the stainless steel bicone fitting RCI-8-12. With stainless steel olive, 1/2 gas cylindrical thread for fixed installation of 8 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 29
15277 Kimo RCI-6-12 S+M - Supply and mounting of the stainless steel bicone fitting RCI-6-12. With stainless steel olive, 1/2 gas cylindrical thread for fixed installation of 6 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 25
15270 Kimo RCI-3-14 S+M - Supply and mounting of the stainless steel bicone fitting RCI-3-14. With stainless steel olive, 1/4 gas cylindrical thread for fixed installation of 3 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 29
15268 Kimo RCT-12-12 S+M - Supply and mounting of the stainless steel bicone fitting RCT-12-12. With PTFE olive, 1/2 gas cylindrical thread, for fixed installation of 12 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 21
15266 Kimo RCT-8-12 S+M - Supply and mounting of the stainless steel bicone fitting RCT-8-12. With PTFE olive, 1/2 gas cylindrical thread, for fixed installation of 8 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 29
15258 Kimo RCT-3-14 S+M - Supply and mounting of the stainless steel bicone fitting RCT-3-14. With PTFE olive, 1/4 gas cylindrical thread, for fixed installation of 3 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 29
15089 Kimo SB-47-25 - 25-meter roll of white silicone tube diameter 4x7mm, type SB-47-25. 95
15089 Kimo SB-47-25 - White silicone tube  Ø 4x7  25m-roll  (200°C max) 95
15089 Kimo SB-47-25 - White silicone tube  Ø 4x7  25m-roll  (200°C max) 95
15088 Kimo SB-47-1 - Meter of SB-47-1 silicone tube . WHITE colour. Diameter 4x7. 5
15088 Kimo SB-47-1 - White silicone tube  Ø 4x7 lg 1m (200°C max) 5
15088 Kimo SB-47-1 - White silicone tube  Ø 4x7 lg 1m (200°C max) 5
15083 Kimo RCT-6-12 S+M - Supply and mounting of the stainless steel bicone fitting RCT-6-12. With PTFE olive, 1/2 gas cylindrical thread, for fixed installation of 6 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 25
14809 Kimo KSP  - Plate for compost probe. Can be fixed with KAV anti-theft system (from KISTOCK range) or with magnetic fastening from the protective covers 53
14808 Kimo KSM - Wall-mounting support for Class 20 Kistock 13
14642 Kimo I-KIC1              - USB interface for PC. For KISTOCK Class 20 + KT20 drivers for KILOG. 115
14497 Kimo TPL-D-14-3000 - STRAIGHT Pitot tube, diameter 14 mm, length 3000 mm 1022
14452 Kimo KT-20-T           - Miniature internal temperature datalogger (0 +125 °C), stainless steel housing diameter 17.85 mm IP 56. Memory capacity: 8,192 points 186
14451 Kimo KT-20-L          - Miniature internal temperature datalogger (-40 +85 °C), stainless steel housing diameter 17.85 mm IP 56. Memory capacity: 8,192 points 124
14450 Kimo KT-20-G           - Miniature internal temperature datalogger (-40 +85 °C), stainless steel housing diameter 17.85 mm IP 56. Memory capacity: 2,048 points 72
14248 Kimo TPL-D-12-2000-T - STRAIGHT Pitot tube, diameter 12 mm, length 2000 mm with K thermocouple 910
14247 Kimo TPL-D-08-1250-T - STRAIGHT Pitot tube, diameter 8 mm, length 1250 mm with K thermocouple 586
14246 Kimo TPL-D-06-800-T - STRAIGHT Pitot tube, diameter 6 mm, length 800 mm with K thermocouple 409
14245 Kimo TPL-D-06-500-T - STRAIGHT Pitot tube, diameter 6 mm, length 500 mm with K thermocouple 377
14244 Kimo TPL-D-12-1500 - STRAIGHT Pitot tube, diameter 12 mm, length 1500 mm 639
14243 Kimo TPL-D-08-1250 - STRAIGHT Pitot tube, diameter 8 mm, length 1250 mm 433
14242 Kimo TPL-D-06-500 - STRAIGHT Pitot tube, diameter 6 mm, length 500 mm 223
14210 Kimo TPL-D-03-200-T - STRAIGHT Pitot tube, diameter 3 mm, length 200 mm with K thermocouple 384
14207 Kimo C-58-50 - Clear tube  Ø 5x8  50m- roll. (60°C max) 78
14207 Kimo C-58-50 - Clear tube  Ø 5x8  50m- roll. (60°C max) 78
14192 Kimo TPL-D-03-300-T - STRAIGHT Pitot tube, diameter 3 mm, length 300 mm with K thermocouple 402
14191 Kimo TPL-D-06-300-T - STRAIGHT Pitot tube, diameter 6 mm, length 300 mm with K thermocouple 207
14149 Kimo TPL-D-12-2000 - STRAIGHT Pitot tube, diameter 12 mm, length 2000 mm 890
14111 Kimo TPL-D-12-1500-T - STRAIGHT Pitot tube, diameter 12 mm, length 1500 mm with K thermocouple 791
14099 Kimo TPL-D-03-100-T - STRAIGHT Pitot tube, diameter 3 mm, length 100 mm with K thermocouple 373
14096 Kimo TPL-D-03-100 - STRAIGHT Pitot tube, diameter 3 mm, length 100 mm 220
14084 Kimo H 75 - Soft cover type H75 for K75 airflow cone. 83
14083 Kimo H 35 - Soft cover type H35 for K35 airflow cone. 73
14082 Kimo H 25 - Soft cover type H25 for K25 airflow cone. 27
14073 Kimo TPL-D-06-800 - STRAIGHT Pitot tube, diameter 6 mm, length 800 mm 252
14069 Kimo Debimo 3000 - Debimo 3000 473
14068 Kimo Debimo 2500 - Debimo 2500 414
14063 Kimo KI-AL-100-C                  - KI-AL-100-C                  55
13983 Kimo TPL-D-06-300 - STRAIGHT Pitot tube, diameter 6 mm, length 300 mm 201
13982 Kimo TPL-D-03-300 - STRAIGHT Pitot tube, diameter 3 mm, length 300 mm 248
13981 Kimo TPL-D-03-200 - STRAIGHT Pitot tube, diameter 3 mm, length 200 mm 233
13973 Kimo KI-AL-1000-C        - KI-AL-1000-C        446
13943 Kimo TPL-D-08-1000-T - STRAIGHT Pitot tube, diameter 8 mm, length 1000 mm with K thermocouple 547
13942 Kimo TPL-D-08-1000 - STRAIGHT Pitot tube, diameter 8 mm, length 1000 mm 395
13825 Kimo PF300 - PF300 26
13812 Kimo KI-DIN/RCTFC-8/12 S+M - KI-DIN/RCTFC-8/12 S+M 111
13805 Kimo PEM12-13                                   - Weather protective shield for humidity probe Ø13 mm. 12 rings shield is suitable for protection of sensors used in meteorology against sun radiation, rain and wind.  263
13804 Kimo CPH                                - 10-unit bag of airtight protection caps for STH humidity probe Ø13 mm. 25
13801 Kimo EPI100                            - Stainless steel protection tip with 100µ stainless steel filter for humidity probe Ø13 mm from Class 200/300.          40
13800 Kimo EPI25                              - Stainless steel protection tip with 25µ stainless steel filter for humidity probe Ø13 mm from Class 200/300. 40
13799 Kimo EPP2                              - PC protection tip with 25µ stainless steel filter for humidity probe Ø13 mm from Class 50/100/200/300 transmitters. 25
13798 Kimo EPFT                              - PTFE 50µ sintered protection tip for humidity probe Ø13 mm from Class 200/300. 74
13797 Kimo EPFI                                   - Stainless steel 10µ sintered protection tip for humidity probe Ø13 mm from Class 200/300. 25
13795 Kimo SFM-13                             - Wall fixing support made of translucide polycarbonate for probe Ø13 mm 13
13790 Kimo KI-DIN/RCCT-13/12            - KI-DIN/RCCT-13/12 stainless steel clamp as per DIN 2566. With cylindrical 1/2 gas sliding connector, diameter 13mm, Teflon ferrule. For probe diam. 13mm. 126
13790 Kimo KI-DIN/RCCT-13/12            - KI-DIN/RCCT-13/12            126
13788 Kimo RCT-13/12                 - RCT-13/12 stainless steel bicone connector, with PTFE olive, for probes Ø 13 mm, 1/2 cylindrical gas thread. 62
13788 Kimo RCT-13/12                 - RCT-13/12                 62
13119 Kimo BF-28-F S+M - Supply and mounting of the cast iron mounting flange type BF-28-F, for the installation of S" type Pitot tubes. (Should be ordered together" with the S" Pitot tube). 77
13116 Kimo BF-12-F S+M - Supply and mounting of the cast iron mounting flange type BF-12-F, for the installation of 12 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 77
13015 Kimo KR 447 - Connection set including 2 connections n° DP 447 and 2m of clear tube 13
13015 Kimo KR 447 - Connection set including: 2 DP 447 connections and 2m clear tube. 13
13003 Kimo TP GR 14 - Realization of the graduation with red marking type : TP GR 14. Graduation from 400 mm to 400 mm on Pitot tube diameter 14 mm. (Should be ordered together with the Pitot tube). 81
13002 Kimo TP GR 12 - Realization of the graduation with red marking type : TP GR 12. Graduation from 200 mm to 200 mm on Pitot tube diameter 12 mm. (Should be ordered together with the Pitot tube). 72
13000 Kimo TPS-08-3000-T - Diameter 8 mm, with protection tube 28mm, length 3000 mm 1275
12999 Kimo TPS-08-2500-T - Diameter 8 mm, with protection tube 28mm, length 2500 mm 1192
12998 Kimo TPS-08-2000-T - Diameter 8 mm, with protection tube 28mm, length 2000 mm 1123
12997 Kimo TPS-08-1500-T - Diameter 8 mm, with protection tube 28mm, length 1500 mm 974
12996 Kimo TPS-08-1000-T - Diameter 8 mm, with protection tube 28mm, length 1000 mm 922
12995 Kimo TPS-08-500-T - Diameter 8 mm, with protection tube 28mm, length 500 mm 838
12994 Kimo TPL-14-3000-T - Diameter 14 mm, length 3000 mm 1192
12993 Kimo TPL-14-2500-T - Diameter 14 mm, length 2500 mm 1045
12992 Kimo TPL-12-2000-T - Diameter 12 mm, length 2000 mm 910
12991 Kimo TPL-12-1500-T - Diameter 12 mm, length 1500 mm 791
12990 Kimo TPL-08-1250-T - Diameter 8 mm, length 1250 mm 586
12989 Kimo TPL-08-1000-T - Diameter 8 mm, length 1000 mm 547
12988 Kimo TPL-06-800-T - Diameter 6 mm, length 800 mm 409
12987 Kimo TPL-06-500-T - Diameter 6 mm, length 500 mm 377
12986 Kimo TPL-06-300-T - Diameter 6 mm, length 300 mm 207
12985 Kimo TPL-03-300-T - Diameter 3 mm, length 300 mm 402
12984 Kimo TPL-03-200-T - Diameter 3 mm, length 200 mm 384
12983 Kimo TPL-03-100-T - Diameter 3 mm, length 100 mm 373
12982 Kimo TPL-14-3000 - Diameter 14 mm, length 3000 mm 1022
12981 Kimo TPL-14-2500 - Diameter 14 mm, length 2500 mm 890
12980 Kimo TPL-12-2000 - Diameter 12 mm, length 2000 mm 757
12979 Kimo TPL-12-1500 - Diameter 12 mm, length 1500 mm 639
12978 Kimo TPL-08-1250 - Diameter 8 mm, length 1250 mm 433
12977 Kimo TPL-08-1000 - Diameter 8 mm, length 1000 mm 395
12976 Kimo TPL-06-800 - Diameter 6 mm, length 800 mm 252
12975 Kimo TPL-06-500 - Diameter 6 mm, length 500 mm 223
12974 Kimo TPL-06-300 - Diameter 6 mm, length 300 mm 201
12973 Kimo TPL-03-300 - Diameter 3 mm, length 300 mm 248
12972 Kimo TPL-03-200 - Diameter 3 mm, length 200 mm 233
12971 Kimo TPL-03-100 - Diameter 3 mm, length 100 mm 220
12964 Kimo KI-AL-100-A - KI-AL-100-A 20
12823 Kimo POCKET - POCKET portable thermometer. Thermistor stainless steel probe, length 125mm (- 40 to + 200 °C). Supplied with plastic cover, clips and battery. 44
12761 Kimo SN-47-25 - Silicone tube black, diameter 4x7. Roll of 25 meters. Type SN-47-25. 95
12761 Kimo SN-47-25 - Black silicone tube  Ø 4x7  25m-roll  (200°C max) 95
12761 Kimo SN-47-25 - Black silicone tube  Ø 4x7  25m-roll  (200°C max) 95
12758 Kimo K 25 - Airflow cone for diam.100 mm vane probe, type K25. Sizes : 200 x 200 mm Airflow from 10 to 300 m3/h, blow and exhaust. Supplied with soft cover. 158
12411 Kimo RD 300  - Straight extension Ø 10 mm, length 300 mm. For hotwire probe and diam.14mm vane probe 53
12411 Kimo RD 300  - Straight extension Ø 10 mm, length 300 mm. For hotwire probe and diam.14mm vane probe. 53
12376 Kimo ETC - Contact adaptor type ETC. Rotating speed : 30 to 20,000 RPM and 4 to 2,500 m/min. For TOP and CT100 O optical probes. 78
11926 Kimo K 150 - Airflow cone type K.150. Sizes : 550x100 mm. Airflow from 10 to 400 m3/h, blow and exhaust. 419
11923 Kimo JYC   - Y junctions 10-unit bag, for Ø 5x8 clear tube. 17
11923 Kimo JYC  x10 - Y-junction 10-unit bag for clear tube Ø 5 x 8 17
11922 Kimo JTC  x10 - T-junction 10-unit bag for clear tube Ø 5 x 8  17
11921 Kimo JDC   - JDC 10-unit bag of straight connections, for diam. 5x8 mm clear tube. 13
11921 Kimo JDC  x10 - JDC 10-unit bag of straight connections, for clear tube Ø 5 x 8  13
11641 Kimo Debimo 630 - Debimo 630 132
11640 Kimo Debimo 400 - Debimo 400 115
11639 Kimo Debimo 125 - Debimo 125 58
11637 Kimo Debimo 100 - Debimo 100 56
11618 Kimo Debimo 800 - Debimo 800 193
11609 Kimo Debimo 2000 - Debimo 2000 356
11605 Kimo Debimo 1500 - Debimo 1500 282
11595 Kimo K 120 - Airflow cone type K120. Sizes : 450x450 mm. Airflow from 50 to 1,200 m3/h, blow and exhaust. 446
11567 Kimo Debimo 1000 - Debimo 1000 223
11566 Kimo Debimo 500 - Debimo 500 119
11438 Kimo KR 483 - Connection set including 2 quick-connections n°483 and 2m of clear tube 18
11438 Kimo KR 483 - Connection set including 2 483 quick-connections and 2m clear tube 18
11431 Kimo BN 150 - Black ball type : BN150-45. Diam. 150 mm with connection gland for temperature probes diam. 2 to 7 mm. Supplied without probe. 339
11262 Kimo Debimo 160 - Debimo 160 62
11244 Kimo Debimo 315 - Debimo 315 96
11203 Kimo Debimo 250 - Debimo 250 83
11202 Kimo Debimo 200 - Debimo 200 70
11121 Kimo 1998 - Additional connection for PC482, for Bulkhead through-connection 10
11121 Kimo 1998 - Additional connection for PC 482, for wall-crossing 10
11090 Kimo DP 339 - DP.447 connection for double-shell wall, max. thickness 80 mm. 11
11090 Kimo DP 339 - Connection for double-shell wall, maximum thickness 80 mm 11
11056 Kimo ECRAN - Silk screen for customized manometers with customer's logo 305
10681 Kimo ECM20 V1 MMH2O 230V - ECM20 V1 MMH2O 230V 322
10670 Kimo MG50 MMH2O - MG50 MMH2O 89
10642 Kimo TUYAU 494 - 1m pressure tube, for MT and KM portable manometers 11
10640 Kimo 466 - Simple connection made of Delrin, for GF manometers with VF1 liquid and Mercury 11
10637 Kimo K 75 - Airflow cone type K75. Sizes : 300 x 300 mm. Airflow from 30 to 750 m3/h, blow and exhaust. Supplied with soft cover. 412
10558 Kimo PC482 Lg.130 - Bulkhead through-connection PC482 L.130 for bulkhead from 107 to 130 mm thick. 13
10558 Kimo PC 482 / 130mm - Bulkhead through-connection PC482 L.130 for bulkhead from 107 to 130 mm thick. 13
10557 Kimo TP GR 08 - Realization of the graduation with red marking type : TP GR 08. Graduation from 200 mm to 200 mm on Pitot tube diameter 8 mm. (Should be ordered together with the Pitot tube). 59
10556 Kimo TP GR 06 - Realization of the graduation with red marking type : TP GR 06. Graduation from 100 mm to 100 mm on Pitot tube diameter 6 mm. (Should be ordered together with the Pitot tube). 51
10549 Kimo MT40 MMH2O - MT40 MMH2O 181
10519 Kimo 30 ml - "Blue manometer liquid, 
Density = 1,86"
91
10518 Kimo 125 ml - "Yellow manometer liquid,
Density = 1"
18
10515 Kimo 125 ml - "Red manometer liquid,
Density =  0,87"
30
10501 Kimo ECM150 V1 MMH2O 230V  - ECM150 V1 MMH2O 230V  322
10500 Kimo ECM88 V2 MMH2O 230V  - ECM88 V2 MMH2O 230V  452
10499 Kimo ECM88 V1 MMH2O 230V - ECM88 V1 MMH2O 230V 346
10482 Kimo TJ600 VOLT1S MMH2O - TJ600 VOLT1S MMH2O 240
10475 Kimo TJ1000 AWS10 MMH2O - TJ1000 AWS10 MMH2O 181
10469 Kimo TJ150 AWS10 MMH2O - TJ150 AWS10 MMH2O 70
10463 Kimo MG20 MMH2O - MG20 MMH2O 77
10459 Kimo LU 200 VOLT1S MMH2O - LU 200 VOLT1S MMH2O 115
10449 Kimo KM 45 - KM 45 212
10447 Kimo HP5 MMH2O - HP5 MMH2O 103
10443 Kimo CP 25 E2 - CP 25 E2 64
10410 Kimo TIG Welding - TIG welding for using Pitot tubes up to 1000 °C. With the exception of 3 mm diameter Pitot tubes. (Should be ordered together with the Pitot tube). 156
10399 Kimo 555 M/F - Male/female spherical coupling nut 16
10398 Kimo 555 F/F - Female/female spherical coupling nut 16
10397 Kimo 666 - Airvent valve 23
10396 Kimo FM-KS-10 - 2-magnet fixations 15
10395 Kimo PC482 Lg.90 - Bulkhead through-connection PC482 L.90, for bulkhead from 67 to 90 mm thick. 13
10395 Kimo PC 482 / 90mm - Bulkhead through-connection PC482 L.90, for bulkhead from 67 to 90 mm thick. 13
10393 Kimo PC482 Lg.70 - Bulkhead through-connection PC482 L.70, for bulkhead from 47 to 70 mm thick. 12
10393 Kimo PC 482 / 70mm - Bulkhead through-connection PC482 L.70, for bulkhead from 47 to 70 mm thick. 12
10391 Kimo PC482 Lg.50 - Bulkhead through-connection PC482 L.50, for bulkhead from 27 to 50 mm thick. 12
10391 Kimo PC 482 / 50mm - Bulkhead through-connection PC482 L.50, for bulkhead from 27 to 50 mm thick. 12
10389 Kimo PC482 Lg.35 - Bulkhead through-connection PC482 L.35, for bulkhead from 12 to 35 mm thick. 12
10389 Kimo PC 482 / 35mm - Bulkhead through-connection PC482 L.35, for bulkhead from 12 to 35 mm thick. 12
10388 Kimo DP 447 - DP.447 connection for double-shell wall, max. thickness 30 mm. 10
10388 Kimo DP 447 - Connection for double-shell wall, maximum thickness 30 mm 10
10387 Kimo 505 - Valve connection, chromed brass, for MT and KM portable manometers, TJ and LU with VOLT 1S liquid. 15
10378 Kimo RTO - Reflective tape for optical tachometer probe ref: RTO, length 1 meter. 30
10378 Kimo RTO - Reflective tape for optical tachometer probe ref: RTO lenght 1 meter. 30
10375 Kimo BNF - Hot-wire cleaning spray, ref. BNF. 40
10374 Kimo K 35 - Airflow cone type K35. Sizes : 200x200 mm. Airflow from 10 to 400 m3/h, blow and exhaust. Supplied with soft cover. 332
10327 Kimo SN-47-1 - Meter of SN-47-1 silicone tube . BLACK colour. Diameter 4x7, ref. SN-47-1. 5
10327 Kimo SN-47-1 - Black silicone tube  Ø 4x7 lg 1m (200°C max) 5
10327 Kimo SN-47-1 - Black silicone tube  Ø 4x7 lg 1m (200°C max) 5
10325 Kimo C-58-1 - Clear tube  Ø 5x8 lg 1m (60°C max) 3
10325 Kimo C-58-1 - Clear tube  Ø 5x8 lg 1m (60°C max) 3
10321 Kimo C-58-25 - Clear tube  Ø 5x8  25m- roll. (60°C max) 44
10321 Kimo C-58-25 - Clear tube  Ø 5x8  25m- roll. (60°C max) 44
10314 Kimo PE458.08 S+M - Supply and mounting of gland PE458.08 for the fixed installation of Pitot tubes and probes of 8 mm diameter. (Should be ordered together with the Pitot tube). 58
10313 Kimo PE458.06 S+M - Supply and mounting of gland PE458.06 for the fixed installation of Pitot tubes and probes of 6 mm diameter. (Should be ordered together with the Pitot tube). 50
10312 Kimo PE458.03 S+M - Supply and mounting of gland PE458.03 for the fixed installation of Pitot tubes of 3 mm diameter. (Should be ordered together with the Pitot tube). 49
10304 Kimo GPN 900 - Plug -8,5 A for all connections Ø 6,2 mm (10-unit bag) 7
10272 Kimo TH300 - TH300 thermistor portable thermometer. Range : from -50 to +150°C. Supplied with pricking probe and 1m cable. 69
10247 Kimo Housse GF 500 - Housse GF 500 36
10244 Kimo Housse GF 1000 - Housse GF 1000 58
10231 Kimo PC482 Lg.210 - Bulkhead through-connection PC482 L.210, for bulkhead from 187 to 210 mm thick. 16
10231 Kimo PC 482 / 210mm - Bulkhead through-connection PC482 L.210, for bulkhead from 187 to 210 mm thick. 16
10230 Kimo PC482 Lg.190 - Bulkhead through-connection PC482 L.190, for bulkhead from 167 to 190 mm thick. 15
10230 Kimo PC 482 / 190mm - Bulkhead through-connection PC482 L.190, for bulkhead from 167 to 190 mm thick. 15
10229 Kimo PC482 Lg.170 - Bulkhead through-connection PC482 L.170, for bulkhead from 147 to 170 mm thick. 15
10229 Kimo PC 482 / 170mm - Bulkhead through-connection PC482 L.170, for bulkhead from 147 to 170 mm thick. 15
10228 Kimo PC482 Lg.150 - Bulkhead through-connection PC482 L.150, for bulkhead from 127 to 150 mm thick. 15
10228 Kimo PC 482 / 150mm - Bulkhead through-connection PC482 L.150, for bulkhead from 127 to 150 mm thick. 15
10227 Kimo PC482 Lg.110 - Bulkhead through-connection PC482 L.110, for bulkhead from 87 to 110 mm thick. 13
10227 Kimo PC 482 / 110mm - Bulkhead through-connection PC482 L.110, for bulkhead from 87 to 110 mm thick. 13
10225 Kimo 509 - Overflow safety connection, chromed brass, for all type of manometers with AWS 10 and VOLT 1S liquid 10
10224 Kimo 487 - Simple connection, chromed brass, for all type of manometers with AWS 10 and VOLT 1S liquid 8
10223 Kimo 484 - Simple connection made of Delrin, for TJ and LU manometers with Mercury 11
10222 Kimo 483 - 483 quick-connection for wall without rear access. 11
10222 Kimo 483 - Quick connection for wall with no rear access 11
10221 Kimo 482 - Simple 482 connection with rear nut.  8
10221 Kimo 482 - Simple connection for wall with rear nut 8
10209 Kimo TP GR 03 - Realization of the graduation with red marking  type : TP GR 03. Graduation from 20 mm to 20 mm on Pitot tube diameter 3 mm. (Should be ordered together with the Pitot tube). 45
10181 Kimo CP 25 E6 - CP 25 E6 67
10179 Kimo GF500  VF1 MMH2O - GF500  VF1 MMH2O 114
10171 Kimo GF1000  VF1 MMH2O - GF1000  VF1 MMH2O 175
10168 Kimo HP15 MMH2O - HP15 MMH2O 112
10166 Kimo HP10 MMH2O - HP10 MMH2O 109
10165 Kimo KX404 MMH2O - KX404 MMH2O 120
10163 Kimo KX205 MMH2O - KX205 MMH2O 95
10161 Kimo LU200 AWS10 MMH2O - LU200 AWS10 MMH2O 60
10159 Kimo LU100 AWS10 MMH2O - LU100 AWS10 MMH2O 51
10156 Kimo LU400 AWS10 MMH2O - LU400 AWS10 MMH2O 78
10148 Kimo LU100 VOLT1S MMH2O - LU100 VOLT1S MMH2O 99
10143 Kimo LU 400 VOLT1S MMH2O - LU 400 VOLT1S MMH2O 150
10130 Kimo MG80 MMH2O - MG80 MMH2O 114
10126 Kimo TJ100 AWS10 MMH2O - TJ100 AWS10 MMH2O 63
10124 Kimo TJ300 AWS10 MMH2O - TJ300 AWS10 MMH2O 91
10120 Kimo TJ600 AWS10 MMH2O - TJ600 AWS10 MMH2O 137
10102 Kimo TJ300 VOLT1S MMH2O - TJ300 VOLT1S MMH2O 177
10101 Kimo TJ1000 VOLT1S MMH2O - TJ1000 VOLT1S MMH2O 325
10098 Kimo TX75 MMH2O - TX75 MMH2O 112
10097 Kimo TX50 MMH2O - TX50 MMH2O 111
10094 Kimo TX25 MMH2O - TX25 MMH2O 106
10093 Kimo VH50 MMH2O - VH50 MMH2O 89
10083 Kimo ECM20 V2 MMH2O 230V  - ECM20 V2 MMH2O 230V  452
10081 Kimo ECM 60 V1 MMH2O 230V - ECM 60 V1 MMH2O 230V 347
10076 Kimo ECM60 V2 MMH2O 230V  - ECM60 V2 MMH2O 230V  452
10073 Kimo ECM150 V2 MMH2O 230V  - 0-150 mmH2O / 230Vac 497
10057 Kimo ECM300 V1 MMH2O 230V  - ECM300 V1 MMH2O 230V  367
10053 Kimo ECM300 V2 MMH2O 230V  - 0-300 mmH2O/ 230Vac 497
10051 Kimo 500 ml - "Red manometer liquid,
Density =  0,87"
46
10050 Kimo 250 ml - "Red manometer liquid,
Density =  0,87"
36
10049 Kimo 20 ml - "Red manometer liquid,
Density =  0,87"
12
10048 Kimo 30 ml - "Red manometer liquid,
Density =  0,87"
15
10047 Kimo ALTUNET - Altunet cleaning product, 500 ml 34
10046 Kimo 1000 ml - "Red manometer liquid,
Density =  0,87"
68
10033 Kimo 30 ml - "Yellow manometer liquid,
Density = 1"
11
10032 Kimo 20 ml - "Yellow manometer liquid,
Density = 1"
8
10028 Kimo 250 ml - "Yellow manometer liquid,
Density = 1"
23
10027 Kimo 125 ml - "Blue manometer liquid, 
Density = 1,86"
315
10026 Kimo 20 ml - "Blue manometer liquid, 
Density = 1,86"
62
10025 Kimo 10 ml - "Blue manometer liquid, 
Density = 1,86"
35
10024 Kimo 1000 ml - "Yellow manometer liquid,
Density = 1"
34
10023 Kimo 500 ml - "Yellow manometer liquid,
Density = 1"
30